Commit 56b57a9e authored by Akinobu Mita's avatar Akinobu Mita Committed by Jonathan Cameron

iio: adc: ti-ads1015: remove unnecessary config register update

The ti-ads1015 driver has eight iio voltage channels and each iio channel
can hold own scale information.

The ADS1015 device only have a single config register which contains an
input multiplexer selection, PGA and data rate settings.  So the driver
should load the correct settings when the input multiplexer selection is

However, regardless of which channlel is currently selected, changing any
iio channel's scale information immediately overwrites the current PGA
setting in the config register.

It is harmless because the correct PGA settings are reloaded just before
getting adc result anyway.  But it is unnecessary register update and
should be removed.

Cc: Daniel Baluta <>
Cc: Jonathan Cameron <>
Signed-off-by: default avatarAkinobu Mita <>
Signed-off-by: default avatarJonathan Cameron <>
parent 4744d4e2
......@@ -312,28 +312,18 @@ static int ads1015_set_scale(struct ads1015_data *data,
struct iio_chan_spec const *chan,
int scale, int uscale)
int i, ret, rindex = -1;
int i;
int fullscale = div_s64((scale * 1000000LL + uscale) <<
(chan->scan_type.realbits - 1), 1000000);
for (i = 0; i < ARRAY_SIZE(ads1015_fullscale_range); i++) {
if (ads1015_fullscale_range[i] == fullscale) {
rindex = i;
data->channel_data[chan->address].pga = i;
return 0;
if (rindex < 0)
return -EINVAL;
ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
rindex << ADS1015_CFG_PGA_SHIFT);
if (ret < 0)
return ret;
data->channel_data[chan->address].pga = rindex;
return 0;
return -EINVAL;
static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate)
Markdown is supported
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment