Commit cb2c9e3f authored by Olivier Scherler's avatar Olivier Scherler Committed by Jiri Kosina

HID: Add new driver for non-compliant Xin-Mo devices.

The driver currently only supports the Dual Arcade controller.
It fixes the negative axis event values (the devices sends -2) to match the
logical axis minimum of the HID report descriptor (the report announces -1).
It is needed because hid-input discards out of bounds values.
Signed-off-by: default avatarOlivier Scherler <oscherler@ithink.ch>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent dfc450b5
......@@ -743,6 +743,14 @@ config HID_WIIMOTE
To compile this driver as a module, choose M here: the
module will be called hid-wiimote.
config HID_XINMO
tristate "Xin-Mo non-fully compliant devices"
depends on HID
---help---
Support for Xin-Mo devices that are not fully compliant with the HID
standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
if you have a Xin-Mo Dual Arcade controller.
config HID_ZEROPLUS
tristate "Zeroplus based game controller support"
depends on HID
......
......@@ -110,6 +110,7 @@ obj-$(CONFIG_HID_TIVO) += hid-tivo.o
obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o
obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o
obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o
obj-$(CONFIG_HID_XINMO) += hid-xinmo.o
obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o
obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o
obj-$(CONFIG_HID_WACOM) += hid-wacom.o
......
......@@ -1751,6 +1751,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET) },
{ HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) },
......
......@@ -885,6 +885,9 @@
#define USB_VENDOR_ID_XAT 0x2505
#define USB_DEVICE_ID_XAT_CSR 0x0220
#define USB_VENDOR_ID_XIN_MO 0x16c0
#define USB_DEVICE_ID_XIN_MO_DUAL_ARCADE 0x05e1
#define USB_VENDOR_ID_XIROKU 0x1477
#define USB_DEVICE_ID_XIROKU_SPX 0x1006
#define USB_DEVICE_ID_XIROKU_MPX 0x1007
......
/*
* HID driver for Xin-Mo devices, currently only the Dual Arcade controller.
* Fixes the negative axis event values (the devices sends -2) to match the
* logical axis minimum of the HID report descriptor (the report announces
* -1). It is needed because hid-input discards out of bounds values.
* (This module is based on "hid-saitek" and "hid-lg".)
*
* Copyright (c) 2013 Olivier Scherler
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include "hid-ids.h"
/*
* Fix negative events that are out of bounds.
*/
static int xinmo_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
switch (usage->code) {
case ABS_X:
case ABS_Y:
case ABS_Z:
case ABS_RX:
if (value < -1) {
input_event(field->hidinput->input, usage->type,
usage->code, -1);
return 1;
}
break;
}
return 0;
}
static const struct hid_device_id xinmo_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
{ }
};
MODULE_DEVICE_TABLE(hid, xinmo_devices);
static struct hid_driver xinmo_driver = {
.name = "xinmo",
.id_table = xinmo_devices,
.event = xinmo_event
};
static int __init xinmo_init(void)
{
return hid_register_driver(&xinmo_driver);
}
static void __exit xinmo_exit(void)
{
hid_unregister_driver(&xinmo_driver);
}
module_init(xinmo_init);
module_exit(xinmo_exit);
MODULE_LICENSE("GPL");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment