GitLab

[ Upstream commit e79e0e14 ]

Before this patch, you could get into situations like this:

1. Process 1 searches for X free blocks, finds them, makes a reservation
2. Process 2 searches for free blocks in the same rgrp, but now the
   bitmap is full because process 1's reservation is skipped over.
   So it marks the bitmap as GBF_FULL.
3. Process 1 tries to allocate blocks from its own reservation, but
   since the GBF_FULL bit is set, it skips over the rgrp and searches
   elsewhere, thus not using its own reservation.

This patch adds an additional check to allow processes to use their
own reservations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 77612578 ]

To speed up the common case of appending to a file,
gfs2_write_alloc_required presumes that writing beyond the end of a file
will always require additional blocks to be allocated.  This assumption
is incorrect for preallocates files, but there are no negative
consequences as long as *some* space is still left on the filesystem.

One special file that always has some space preallocated beyond the end
of the file is the rindex: when growing a filesystem, gfs2_grow adds one
or more new resource groups and appends records describing those
resource groups to the rindex; the preallocated space ensures that this
is always possible.

However, when a filesystem is completely full, gfs2_write_alloc_required
will indicate that an additional allocation is required, and appending
the next record to the rindex will fail even though space for that
record has already been preallocated.  To fix that, skip the incorrect
optimization in gfs2_write_alloc_required, but for the rindex only.
Other writes to preallocated space beyond the end of the file are still
allowed to fail on completely full filesystems.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 174d1232 ]

The chunk size of allocations in __gfs2_fallocate is calculated
incorrectly.  The size can collapse, causing __gfs2_fallocate to
allocate one block at a time, which is very inefficient.  This needs
fixing in two places:

In gfs2_quota_lock_check, always set ap->allowed to UINT_MAX to indicate
that there is no quota limit.  This fixes callers that rely on
ap->allowed to be set even when quotas are off.

In __gfs2_fallocate, reset max_blks to UINT_MAX in each iteration of the
loop to make sure that allocation limits from one resource group won't
spill over into another resource group.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit cc555b09 ]

This patch fixes a deadlock caused when the jdata flag is set for
inodes that are already on the ordered write list. Since it is
on the ordered write list, log_flush calls gfs2_ordered_write which
calls filemap_fdatawrite. But since the inode had the jdata flag
set, that calls gfs2_jdata_writepages, which tries to start a new
transaction. A new transaction cannot be started because it tries
to acquire the log_flush rwsem which is already locked by the log
flush operation.

The bottom line is: We cannot switch an inode from ordered to jdata
until we eliminate any ordered data pages (via log flush) or any
log_flush operation afterward will create the circular dependency
above. So we need to flush the log before setting the diskflags to
switch the file mode, then we need to remove the inode from the
ordered writes list.

Before this patch, the log flush was done for jdata->ordered, but
that's wrong. If we're going from jdata to ordered, we don't need
to call gfs2_log_flush because the call to filemap_fdatawrite will
do it for us:

   filemap_fdatawrite() -> __filemap_fdatawrite_range()
      __filemap_fdatawrite_range() -> do_writepages()
         do_writepages() -> gfs2_jdata_writepages()
            gfs2_jdata_writepages() -> gfs2_log_flush()

This patch modifies function do_gfs2_set_flags so that if a file
has its jdata flag set, and it's already on the ordered write list,
the log will be flushed and it will be removed from the list
before setting the flag.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The switch to rhashtables (commit 88ffbf3e) broke the debugfs glock
dump (/sys/kernel/debug/gfs2/<device>/glocks) for dumps bigger than a
single buffer: the right function for restarting an rhashtable iteration
from the beginning of the hash table is rhashtable_walk_enter;
rhashtable_walk_stop + rhashtable_walk_start will just resume from the
current position.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.3+

When changing a file's acl mask, __gfs2_set_acl() will first set the
group bits of i_mode to the value of the mask, and only then set the
actual extended attribute representing the new acl.

If the second part fails (due to lack of space, for example) and the
file had no acl attribute to begin with, the system will from now on
assume that the mask permission bits are actual group permission bits,
potentially granting access to the wrong users.

Prevent this by only changing the inode mode after the acl has been set.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

The function __gfs2_xattr_set() will return -ENODATA when called to
remove a xattr that does not exist. The result is that setfacl will
show an exit status of 1 when called to set only a file's mode bits
(on a file with no ACLs), despite succeeding. A "No data available"
error will be printed as well.

To fix this return 0 instead, except when the XATTR_REPLACE flag is
set, in which case -ENODATA is appropriate. This is consistent with
how most other xattr setting functions work, in other filesystems.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Before this patch if you truncated a file to a smaller size it
wasn't freeing all the blocks properly. There are two reasons.

First, the metapath comparison was not comparing previous heights.
I added a function, mp_eq_to_hgt, which checks the metapath at
all heights prior to the target height.

Second, in function find_nonnull_ptr, it needed to zero out all
pointers for heights following the target height. Translated into
decimal integer terms, this way a number like 299, when incremented,
becomes 300, not 399. The 2 gets incremented to 3, and the following
digits need to be reset.

These two things allow the truncate state machine to properly find
the blocks it needs to delete.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

rhashtable_params are not supposed to change at runtime. All
Functions rhashtable_* working with const rhashtable_params
provided by <linux/rhashtable.h>. So mark the non-const structs
as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

The following cleanup is needed to avoid spilling the syslog with
false warnings.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

This patch cleans up various pieces of GFS2 to avoid sparse errors.
This doesn't fix them all, but it fixes several. The first error,
in function glock_hash_walk was a genuine bug where the rhashtable
could be started and not stopped.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Enlarge sd_fsname to be big enough for the longest long lock table name
and an arbitrary journal number.  This silences two -Wformat-truncation
warnings with gcc 7.1.1.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Before this patch, if GFS2 encountered IO errors while writing to
the journal, it would not report the problem, so they would go
unnoticed, sometimes for many hours. Sometimes this would only be
noticed later, when recovery tried to do journal replay and failed
due to invalid metadata at the blocks that resulted in IO errors.

This patch makes GFS2's log daemon check for IO errors. If it
encounters one, it withdraws from the file system and reports
why in dmesg. A similar action is taken when IO errors occur when
writing to the system statfs file.

These errors are also reported back to any callers of fsync, since
that requires the journal to be flushed. Therefore, any IO errors
that would previously go unnoticed are now noticed and the file
system is withdrawn as early as possible, thus preventing further
file system damage.

Also note that this reintroduces superblock variable sd_log_error,
which Christoph removed with commit f729b66f.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

This way we don't need a block_device structure to submit I/O.  The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open.  Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device.  But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When using cman-3.0.12.1 and gfs2-utils-3.0.12.1, mounting and
unmounting GFS2 file system would cause kernel to hang. The slab
allocator suggests that it is likely a double free memory corruption.
The issue is traced back to v3.9-rc6 where a patch is submitted to
use kzalloc() for storing a bitmap instead of using a local variable.
The intention is to allocate memory during mount and to free memory
during unmount. The original patch misses a code path which has
already freed the memory and caused memory corruption. This patch sets
the memory pointer to NULL after the memory is freed, so that double
free memory corruption will not happen.

gdlm_mount()
  '-- set_recover_size() which use kzalloc()
  '-- if dlm does not support ops callbacks then
          '--- free_recover_size() which use kfree()

gldm_unmount()
  '-- free_recover_size() which use kfree()

Previous patch which introduced the double free issue is
commit 57c7310b ("GFS2: use kmalloc for lvb bitmap")
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>

On systems with low memory, it is possible for gfs2 to infinitely
loop in balance_dirty_pages() under heavy IO (creating sparse files).

balance_dirty_pages() attempts to write out the dirty pages via
gfs2_writepages() but none are found because these dirty pages are
being used by the journaling code in the ail. Normally, the journal
has an upper threshold which when hit triggers an automatic flush
of the ail. But this threshold can be higher than the number of
allowable dirty pages and result in the ail never being flushed.

This patch forces an ail flush when gfs2_writepages() fails to write
anything. This is a good indication that the ail might be holding
some dirty pages.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

The prepare_to_wait_on_glock and finish_wait_on_glock functions introduced in
commit 56a365be "gfs2: gfs2_glock_get: Wait on freeing glocks" are
better removed, resulting in cleaner code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

When under memory pressure and an inode's link count has dropped to
zero, defer deleting the inode to the delete workqueue.  This avoids
calling into DLM under memory pressure, which can deadlock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

gfs2_evict_inode is called to free inodes under memory pressure.  The
function calls into DLM when an inode's last cluster-wide reference goes
away (remote unlink) and to release the glock and associated DLM lock
before finally destroying the inode.  However, if DLM is blocked on
memory to become available, calling into DLM again will deadlock.

Avoid that by decoupling releasing glocks from destroying inodes in that
case: with gfs2_glock_queue_put, glocks will be dequeued asynchronously
in work queue context, when the associated inodes have likely already
been destroyed.

With this change, inodes can end up being unlinked, remote-unlink can be
triggered, and then the inode can be reallocated before all
remote-unlink callbacks are processed.  To detect that, revalidate the
link count in gfs2_evict_inode to make sure we're not deleting an
allocated, referenced inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Remove gfs2_set_nlink which prevents the link count of an inode from
becoming non-zero once it has reached zero.  The next commit reduces the
amount of waiting on glocks when an inode is evicted from memory.  With
that, an inode can become reallocated before all the remote-unlink
callbacks from a previous delete are processed, which causes the link
count to change from zero to non-zero.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Keep glocks in their hash table until they are freed instead of removing
them when their last reference is dropped.  This allows to wait for any
previous instances of a glock to go away in gfs2_glock_get before
creating a new glocks.

Special thanks to Andy Price for finding and fixing a problem which also
required us to delete the rcu_read_unlock from the error case in function
gfs2_glock_get.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

This patch moves the call to gfs2_delete_debugfs_file so that it
comes after the glock hash table has been cleared. This way we
can query the debugfs files if umount hangs.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Before this patch, glock_dq would call gfs2_glock_remove_from_lru.
For glocks that are never put on the LRU, such as the transaction
glock, this just takes the spin_lock, determines there's nothing to
be done because the list is empty, then unlocks again. This was
causing unnecessary lock contention on the lru_lock spin_lock.
This patch adds a check for GLOF_LRU in the glops before taking
the spin_lock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

This patch removes a call to gfs2_glock_add_to_lru from function
gfs2_clear_rgrpd. The call is just a waste of time because as soon
as it adds it to the lru_list, the call to gfs2_glock_put takes it
back off again.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

This patch adds some calls to clear gl_object in function
gfs2_delete_inode. Since we are deleting the inode, and the glock
typically outlives the inode in core, we must clear gl_object
so subsequent use of the glock (e.g. for a new inode in its place)
will not have the old pointer sitting there. In error cases we
need to tidy up after ourselves. In non-error cases, we need to
clear gl_object before we set the block free in the bitmap so
residules aren't left for potential inode creators.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>

If function gfs2_create_inode fails after the inode has been
created (for example, if the inode_refresh fails for some reason)
the function was setting gl_object but never clearing it again.
The glocks are left pointing to a freed inode. This patch adds
the calls to clear gl_object in the appropriate error paths.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>

Also, fix a place where a writeback error might get dropped in the
gfs2_is_jdata case.
Signed-off-by: Jeff Layton <jlayton@redhat.com>

Before this patch, the inode glock's gl_object was set after a
reference was acquired, but before the block type was verified.
In cases where the block was unlinked, then freed and reused on
another node, a residule delete callback (delete_work) would try
to look up the inode, eventually failing the block check, but
only after it overwrites gl_object with a pointer to the wrong
inode. This patch moves the assignment of gl_object after the
block check so it won't be improperly overwritten.

Likewise, at the end of the function, gfs2_inode_lookup was
clearing gl_object after it unlocked the glock, which meant
another process might free the glock in the meantime. This
patch guards against that case.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>

This patch introduces a new helper function in glock.h that
clears gl_object, with an added integrity check. An additional
integrity check has been added to glock_set_object, plus comments.
This is step 1 in a series to ensure gl_object integrity.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>

When gfs2 does metadata I/O, only REQ_META is used as a metadata hint of
the bio. But flag REQ_META is just a hint for block trace, not for block
layer code to handle a bio as metadata request.

For some of metadata I/Os of gfs2, A REQ_PRIO flag on the metadata bio
would be very informative to block layer code. For example, if bcache is
used as a I/O cache for gfs2, it will be possible for bcache code to get
the hint and cache the pre-fetched metadata blocks on cache device. This
behavior may be helpful to improve metadata I/O performance if the
following requests hit the cache.

Here are the locations in gfs2 code where a REQ_PRIO flag should be added,
- All places where REQ_READAHEAD is used, gfs2 code uses this flag for
  metadata read ahead.
- In gfs2_meta_rq() where the first metadata block is read in.
- In gfs2_write_buf_to_page(), read in quota metadata blocks to have them
  up to date.
These metadata blocks are probably to be accessed again in future, adding
a REQ_PRIO flag may have bcache to keep such metadata in fast cache
device. For system without a cache layer, REQ_PRIO can still provide hint
to block layer to handle metadata requests more properly.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

In inode_go_lock() function, the parameter order of list_add() is error.
According to the define of list_add(), the first parameter is new entry
and the second is the list head, so ip->i_trunc_list should be the
first parameter and the sdp->sd_trunc_list should be second.

Signed-off-by: Wang Xibo<wang.xibo@zte.com.cn>
Signed-off-by: Xiao Likun<xiao.likun@zte.com.cn>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

When commit 4fd1a579 moved the call to flush_delayed_work from
gfs2_evict_inode to gfs2_inode_lookup to avoid calling into DLM during
evict, a similar call should have been added to gfs2_create_inode:
that's another code path in which glocks of previous inodes may be
reused.

The flush of the iopen glock work queue added by 4fd1a579, on the
other hand, is unnecessary and can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.

Fix the problem by moving posix_acl_update_mode() out of
__gfs2_set_acl() into gfs2_set_acl(). That way the function will not be
called when inheriting ACLs which is what we want as it prevents SGID
bit clearing and the mode has been properly set by posix_acl_create()
anyway.

Fixes: 07393101Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Function gfs2_holder_initialized should be used in do_flock as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Before this patch, problems reading in indirect buffers would send
an IO error back to the caller, and release the buffer_head with
brelse() in function gfs2_meta_indirect_buffer, however, it would
still return the address of the buffer_head it released. After the
error was discovered, function gfs2_block_map would call function
release_metapath to free all buffers. That checked:
if (mp->mp_bh[i] == NULL) but since the value was set after the
error, it was non-zero, so brelse was called a second time. This
resulted in the following error:

kernel: WARNING: at fs/buffer.c:1224 __brelse+0x3a/0x40() (Tainted: G        W  -- ------------   )
kernel: Hardware name: RHEV Hypervisor
kernel: VFS: brelse: Trying to free free buffer

This patch changes gfs2_meta_indirect_buffer so it only sets
the buffer_head pointer in cases where it isn't released.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>

Firstly by applying the following with coccinelle's spatch:

	@@ expression SB; @@
	-SB->s_flags & MS_RDONLY
	+sb_rdonly(SB)

to effect the conversion to sb_rdonly(sb), then by applying:

	@@ expression A, SB; @@
	(
	-(!sb_rdonly(SB)) && A
	+!sb_rdonly(SB) && A
	|
	-A != (sb_rdonly(SB))
	+A != sb_rdonly(SB)
	|
	-A == (sb_rdonly(SB))
	+A == sb_rdonly(SB)
	|
	-!(sb_rdonly(SB))
	+!sb_rdonly(SB)
	|
	-A && (sb_rdonly(SB))
	+A && sb_rdonly(SB)
	|
	-A || (sb_rdonly(SB))
	+A || sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) != A
	+sb_rdonly(SB) != A
	|
	-(sb_rdonly(SB)) == A
	+sb_rdonly(SB) == A
	|
	-(sb_rdonly(SB)) && A
	+sb_rdonly(SB) && A
	|
	-(sb_rdonly(SB)) || A
	+sb_rdonly(SB) || A
	)

	@@ expression A, B, SB; @@
	(
	-(sb_rdonly(SB)) ? 1 : 0
	+sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) ? A : B
	+sb_rdonly(SB) ? A : B
	)

to remove left over excess bracketage and finally by applying:

	@@ expression A, SB; @@
	(
	-(A & MS_RDONLY) != sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
	|
	-(A & MS_RDONLY) == sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
	)

to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>

Before commit 88ffbf3e "GFS2: Use resizable hash table for glocks",
glocks were freed via call_rcu to allow reading the glock hashtable
locklessly using rcu.  This was then changed to free glocks immediately,
which made reading the glock hashtable unsafe.  Bring back the original
code for freeing glocks via call_rcu.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # 4.3+

I noticed on xfs that I could still sometimes get back an error on fsync
on a fd that was opened after the error condition had been cleared.

The problem is that the buffer code sets the write_io_error flag and
then later checks that flag to set the error in the mapping. That flag
perisists for quite a while however. If the file is later opened with
O_TRUNC, the buffers will then be invalidated and the mapping's error
set such that a subsequent fsync will return error. I think this is
incorrect, as there was no writeback between the open and fsync.

Add a new mark_buffer_write_io_error operation that sets the flag and
the error in the mapping at the same time. Replace all calls to
set_buffer_write_io_error with mark_buffer_write_io_error, and remove
the places that check this flag in order to set the error in the
mapping.

This sets the error in the mapping earlier, at the time that it's first
detected.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>