commit 13d3047c upstream.

Mike Lothian reported that plugging in a USB-C device does not work
properly in his Dell Alienware system.  This system has an Intel Alpine
Ridge Thunderbolt controller providing USB-C functionality.  In these
systems the USB controller (xHCI) is hotplugged whenever a device is
connected to the port using ACPI-based hotplug.

The ACPI description of the root port in question is as follows:

  Device (RP01)
  {
      Name (_ADR, 0x001C0000)

      Device (PXSX)
      {
          Name (_ADR, 0x02)

          Method (_RMV, 0, NotSerialized)
          {
              // ...
          }
      }

Here _ADR 0x02 means device 0, function 2 on the bus under root port (RP01)
but that seems to be incorrect because device 0 is the upstream port of the
Alpine Ridge PCIe switch and it has no functions other than 0 (the bridge
itself).  When we get ACPI Notify() to the root port resulting from
connecting a USB-C device, Linux tries to read PCI_VENDOR_ID from device 0,
function 2 which of course always returns 0xffffffff because there is no
such function and we never find the device.

In Windows this works fine.

Now, since we get ACPI Notify() to the root port and not to the PXSX device
we should actually start our scan from there as well and not from the
non-existent PXSX device.  Fix this by checking presence of the slot itself
(function 0) if we fail to do that otherwise.

While there use pci_bus_read_dev_vendor_id() in get_slot_status(), which is
the recommended way to read Device and Vendor IDs of devices on PCI buses.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=198557


Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>