Kconfig 61.7 KB
Newer Older
1

Linus Torvalds's avatar
Linus Torvalds committed
2 3 4 5
#
# Watchdog device configuration
#

6
menuconfig WATCHDOG
Linus Torvalds's avatar
Linus Torvalds committed
7 8 9 10 11 12 13 14
	bool "Watchdog Timer Support"
	---help---
	  If you say Y here (and to one of the following options) and create a
	  character special file /dev/watchdog with major number 10 and minor
	  number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
	  subsequently opening the file and then failing to write to it for
	  longer than 1 minute will result in rebooting the machine. This
	  could be useful for a networked machine that needs to come back
Wim Van Sebroeck's avatar
Wim Van Sebroeck committed
15
	  on-line as fast as possible after a lock-up. There's both a watchdog
Linus Torvalds's avatar
Linus Torvalds committed
16 17 18
	  implementation entirely in software (which can sometimes fail to
	  reboot the machine) and a driver for hardware watchdog boards, which
	  are more robust and can also keep track of the temperature inside
19 20
	  your computer. For details, read
	  <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
Linus Torvalds's avatar
Linus Torvalds committed
21 22 23 24 25 26 27 28 29

	  The watchdog is usually used together with the watchdog daemon
	  which is available from
	  <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
	  also monitor NFS connections and can reboot the machine when the process
	  table is full.

	  If unsure, say N.

30 31
if WATCHDOG

32 33 34 35 36 37 38 39
config WATCHDOG_CORE
	bool "WatchDog Timer Driver Core"
	---help---
	  Say Y here if you want to use the new watchdog timer driver core.
	  This driver provides a framework for all watchdog timer drivers
	  and gives them the /dev/watchdog interface (and later also the
	  sysfs interface).

Linus Torvalds's avatar
Linus Torvalds committed
40 41 42 43 44 45 46 47 48
config WATCHDOG_NOWAYOUT
	bool "Disable watchdog shutdown on close"
	help
	  The default watchdog behaviour (which you get if you say N here) is
	  to stop the timer if the process managing it closes the file
	  /dev/watchdog. It's always remotely possible that this process might
	  get killed. If you say Y here, the watchdog cannot be stopped once
	  it has been started.

49 50 51 52 53 54 55 56 57 58 59
config WATCHDOG_HANDLE_BOOT_ENABLED
	bool "Update boot-enabled watchdog until userspace takes over"
	default y
	help
	  The default watchdog behaviour (which you get if you say Y here) is
	  to ping watchdog devices that were enabled before the driver has
	  been loaded until control is taken over from userspace using the
	  /dev/watchdog file. If you say N here, the kernel will not update
	  the watchdog on its own. Thus if your userspace does not start fast
	  enough your device will reboot.

60 61 62 63 64 65
config WATCHDOG_SYSFS
	bool "Read different watchdog information through sysfs"
	help
	  Say Y here if you want to enable watchdog device status read through
	  sysfs attributes.

Linus Torvalds's avatar
Linus Torvalds committed
66 67 68 69 70 71
#
# General Watchdog drivers
#

comment "Watchdog Device Drivers"

Matt LaPlante's avatar
Matt LaPlante committed
72
# Architecture Independent
Linus Torvalds's avatar
Linus Torvalds committed
73 74 75

config SOFT_WATCHDOG
	tristate "Software watchdog"
76
	select WATCHDOG_CORE
Linus Torvalds's avatar
Linus Torvalds committed
77 78 79 80 81 82 83 84
	help
	  A software monitoring watchdog. This will fail to reboot your system
	  from some situations that the hardware watchdog will recover
	  from. Equally it's a lot cheaper to install.

	  To compile this driver as a module, choose M here: the
	  module will be called softdog.

85 86 87 88 89 90 91 92
config SOFT_WATCHDOG_PRETIMEOUT
	bool "Software watchdog pretimeout governor support"
	depends on SOFT_WATCHDOG && WATCHDOG_PRETIMEOUT_GOV
	help
	  Enable this if you want to use pretimeout governors with the software
	  watchdog. Be aware that governors might affect the watchdog because it
	  is purely software, e.g. the panic governor will stall it!

93
config DA9052_WATCHDOG
94
	tristate "Dialog DA9052 Watchdog"
95
	depends on PMIC_DA9052 || COMPILE_TEST
96 97 98 99
	select WATCHDOG_CORE
	help
	  Support for the watchdog in the DA9052 PMIC. Watchdog trigger
	  cause system reset.
100

101 102 103
	  Say Y here to include support for the DA9052 watchdog.
	  Alternatively say M to compile the driver as a module,
	  which will be called da9052_wdt.
104

105 106
config DA9055_WATCHDOG
	tristate "Dialog Semiconductor DA9055 Watchdog"
107
	depends on MFD_DA9055 || COMPILE_TEST
108
	select WATCHDOG_CORE
109 110 111 112 113 114 115
	help
	  If you say yes here you get support for watchdog on the Dialog
	  Semiconductor DA9055 PMIC.

	  This driver can also be built as a module.  If so, the module
	  will be called da9055_wdt.

116 117
config DA9063_WATCHDOG
	tristate "Dialog DA9063 Watchdog"
118
	depends on MFD_DA9063 || COMPILE_TEST
119 120 121 122 123 124
	select WATCHDOG_CORE
	help
	  Support for the watchdog in the DA9063 PMIC.

	  This driver can be built as a module. The module name is da9063_wdt.

125
config DA9062_WATCHDOG
126
	tristate "Dialog DA9062/61 Watchdog"
127
	depends on MFD_DA9062 || COMPILE_TEST
128 129
	select WATCHDOG_CORE
	help
130
	  Support for the watchdog in the DA9062 and DA9061 PMICs.
131 132 133

	  This driver can be built as a module. The module name is da9062_wdt.

134 135 136 137 138 139 140 141
config GPIO_WATCHDOG
	tristate "Watchdog device controlled through GPIO-line"
	depends on OF_GPIO
	select WATCHDOG_CORE
	help
	  If you say yes here you get support for watchdog device
	  controlled through GPIO-line.

142 143 144 145 146 147 148 149 150 151 152
config GPIO_WATCHDOG_ARCH_INITCALL
	bool "Register the watchdog as early as possible"
	depends on GPIO_WATCHDOG=y
	help
	  In some situations, the default initcall level (module_init)
	  in not early enough in the boot process to avoid the watchdog
	  to be triggered.
	  If you say yes here, the initcall level would be raised to
	  arch_initcall.
	  If in doubt, say N.

153 154
config MENF21BMC_WATCHDOG
	tristate "MEN 14F021P00 BMC Watchdog"
155
	depends on MFD_MENF21BMC || COMPILE_TEST
156
	depends on I2C
157 158 159 160 161 162 163
	select WATCHDOG_CORE
	help
	  Say Y here to include support for the MEN 14F021P00 BMC Watchdog.

	  This driver can also be built as a module. If so the module
	  will be called menf21bmc_wdt.

164 165 166
config TANGOX_WATCHDOG
	tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
	select WATCHDOG_CORE
167
	depends on ARCH_TANGO || COMPILE_TEST
168
	depends on HAS_IOMEM
169 170 171 172 173 174
	help
	  Support for the watchdog in Sigma Designs SMP86xx (tango3)
	  and SMP87xx (tango4) family chips.

	  This driver can be built as a module. The module name is tangox_wdt.

175 176 177
config WDAT_WDT
	tristate "ACPI Watchdog Action Table (WDAT)"
	depends on ACPI
178
	select WATCHDOG_CORE
179 180 181 182 183 184 185 186 187 188
	select ACPI_WATCHDOG
	help
	  This driver adds support for systems with ACPI Watchdog Action
	  Table (WDAT) table. Servers typically have this but it can be
	  found on some desktop machines as well. This driver will take
	  over the native iTCO watchdog driver found on many Intel CPUs.

	  To compile this driver as module, choose M here: the module will
	  be called wdat_wdt.

189 190
config WM831X_WATCHDOG
	tristate "WM831x watchdog"
191
	depends on MFD_WM831X
192
	select WATCHDOG_CORE
193 194 195 196
	help
	  Support for the watchdog in the WM831x AudioPlus PMICs.  When
	  the watchdog triggers the system will be reset.

197 198 199
config WM8350_WATCHDOG
	tristate "WM8350 watchdog"
	depends on MFD_WM8350
200
	select WATCHDOG_CORE
201 202 203 204
	help
	  Support for the watchdog in the WM8350 AudioPlus PMIC.  When
	  the watchdog triggers the system will be reset.

205 206
config XILINX_WATCHDOG
	tristate "Xilinx Watchdog timer"
207
	depends on HAS_IOMEM
208 209 210 211 212 213 214
	select WATCHDOG_CORE
	help
	  Watchdog driver for the xps_timebase_wdt ip core.

	  To compile this driver as a module, choose M here: the
	  module will be called of_xilinx_wdt.

215 216 217 218 219 220 221 222 223 224 225
config ZIIRAVE_WATCHDOG
	tristate "Zodiac RAVE Watchdog Timer"
	depends on I2C
	select WATCHDOG_CORE
	help
	  Watchdog driver for the Zodiac Aerospace RAVE Switch Watchdog
	  Processor.

	  To compile this driver as a module, choose M here: the
	  module will be called ziirave_wdt.

226 227
# ALPHA Architecture

Linus Torvalds's avatar
Linus Torvalds committed
228 229
# ARM Architecture

230 231
config ARM_SP805_WATCHDOG
	tristate "ARM SP805 Watchdog"
232
	depends on (ARM || ARM64 || COMPILE_TEST) && ARM_AMBA
233
	select WATCHDOG_CORE
234 235 236 237
	help
	  ARM Primecell SP805 Watchdog timer. This will reboot your system when
	  the timeout is reached.

238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257
config ARM_SBSA_WATCHDOG
	tristate "ARM SBSA Generic Watchdog"
	depends on ARM64
	depends on ARM_ARCH_TIMER
	select WATCHDOG_CORE
	help
	  ARM SBSA Generic Watchdog has two stage timeouts:
	  the first signal (WS0) is for alerting the system by interrupt,
	  the second one (WS1) is a real hardware reset.
	  More details: ARM DEN0029B - Server Base System Architecture (SBSA)

	  This driver can operate ARM SBSA Generic Watchdog as a single stage
	  or a two stages watchdog, it depends on the module parameter "action".

	  Note: the maximum timeout in the two stages mode is half of that in
	  the single stage mode.

	  To compile this driver as module, choose M here: The module
	  will be called sbsa_gwdt.

258 259
config ASM9260_WATCHDOG
	tristate "Alphascale ASM9260 watchdog"
260
	depends on MACH_ASM9260 || COMPILE_TEST
261 262 263 264 265 266 267
	depends on OF
	select WATCHDOG_CORE
	select RESET_CONTROLLER
	help
	  Watchdog timer embedded into Alphascale asm9260 chips. This will reboot your
	  system when the timeout is reached.

268
config AT91RM9200_WATCHDOG
269
	tristate "AT91RM9200 watchdog"
270
	depends on (SOC_AT91RM9200 && MFD_SYSCON) || COMPILE_TEST
271 272 273 274
	help
	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
	  system when the timeout is reached.

275
config AT91SAM9X_WATCHDOG
276
	tristate "AT91SAM9X / AT91CAP9 watchdog"
277
	depends on ARCH_AT91 || COMPILE_TEST
278
	select WATCHDOG_CORE
279
	help
280 281
	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
	  reboot your system when the timeout is reached.
282

283 284
config SAMA5D4_WATCHDOG
	tristate "Atmel SAMA5D4 Watchdog Timer"
285
	depends on ARCH_AT91 || COMPILE_TEST
286 287 288 289 290 291
	select WATCHDOG_CORE
	help
	  Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips.
	  Its Watchdog Timer Mode Register can be written more than once.
	  This will reboot your system when the timeout is reached.

292 293
config CADENCE_WATCHDOG
	tristate "Cadence Watchdog Timer"
294
	depends on HAS_IOMEM
295 296 297 298 299
	select WATCHDOG_CORE
	help
	  Say Y here if you want to include support for the watchdog
	  timer in the Xilinx Zynq.

Linus Torvalds's avatar
Linus Torvalds committed
300 301
config 21285_WATCHDOG
	tristate "DC21285 watchdog"
302
	depends on FOOTBRIDGE
Linus Torvalds's avatar
Linus Torvalds committed
303
	help
Wim Van Sebroeck's avatar
Wim Van Sebroeck committed
304
	  The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
Linus Torvalds's avatar
Linus Torvalds committed
305 306 307 308 309 310 311 312 313 314 315
	  here if you wish to use this. Alternatively say M to compile the
	  driver as a module, which will be called wdt285.

	  This driver does not work on all machines. In particular, early CATS
	  boards have hardware problems that will cause the machine to simply
	  lock up if the watchdog fires.

	  "If in doubt, leave it out" - say N.

config 977_WATCHDOG
	tristate "NetWinder WB83C977 watchdog"
316
	depends on (FOOTBRIDGE && ARCH_NETWINDER) || (ARM && COMPILE_TEST)
Linus Torvalds's avatar
Linus Torvalds committed
317 318 319 320 321 322 323
	help
	  Say Y here to include support for the WB977 watchdog included in
	  NetWinder machines. Alternatively say M to compile the driver as
	  a module, which will be called wdt977.

	  Not sure? It's safe to say N.

324 325 326 327 328 329 330 331 332 333 334
config GEMINI_WATCHDOG
	tristate "Gemini watchdog"
	depends on ARCH_GEMINI
	select WATCHDOG_CORE
	help
	  Say Y here if to include support for the watchdog timer
	  embedded in the Cortina Systems Gemini family of devices.

	  To compile this driver as a module, choose M here: the
	  module will be called gemini_wdt.

Linus Torvalds's avatar
Linus Torvalds committed
335 336
config IXP4XX_WATCHDOG
	tristate "IXP4xx Watchdog"
337
	depends on ARCH_IXP4XX
Linus Torvalds's avatar
Linus Torvalds committed
338 339 340 341 342 343 344 345 346 347 348 349 350
	help
	  Say Y here if to include support for the watchdog timer
	  in the Intel IXP4xx network processors. This driver can
	  be built as a module by choosing M. The module will
	  be called ixp4xx_wdt.

	  Note: The internal IXP4xx watchdog does a soft CPU reset
	  which doesn't reset any peripherals. There are circumstances
	  where the watchdog will fail to reset the board correctly
	  (e.g., if the boot ROM is in an unreadable state).

	  Say N if you are unsure.

351 352 353 354 355 356 357
config KS8695_WATCHDOG
	tristate "KS8695 watchdog"
	depends on ARCH_KS8695
	help
	  Watchdog timer embedded into KS8695 processor. This will reboot your
	  system when the timeout is reached.

358 359 360 361 362 363 364
config HAVE_S3C2410_WATCHDOG
	bool
	help
	  This will include watchdog timer support for Samsung SoCs. If
	  you want to include watchdog support for any machine, kindly
	  select this in the respective mach-XXXX/Kconfig file.

Linus Torvalds's avatar
Linus Torvalds committed
365 366
config S3C2410_WATCHDOG
	tristate "S3C2410 Watchdog"
367
	depends on HAVE_S3C2410_WATCHDOG || COMPILE_TEST
368
	select WATCHDOG_CORE
369
	select MFD_SYSCON if ARCH_EXYNOS
Linus Torvalds's avatar
Linus Torvalds committed
370
	help
371 372
	  Watchdog timer block in the Samsung SoCs. This will reboot
	  the system when the timer expires with the watchdog enabled.
Linus Torvalds's avatar
Linus Torvalds committed
373 374

	  The driver is limited by the speed of the system's PCLK
Matt LaPlante's avatar
Matt LaPlante committed
375
	  signal, so with reasonably fast systems (PCLK around 50-66MHz)
Linus Torvalds's avatar
Linus Torvalds committed
376 377 378 379 380 381 382 383
	  then watchdog intervals of over approximately 20seconds are
	  unavailable.

	  The driver can be built as a module by choosing M, and will
	  be called s3c2410_wdt

config SA1100_WATCHDOG
	tristate "SA1100/PXA2xx watchdog"
384
	depends on ARCH_SA1100 || ARCH_PXA
Linus Torvalds's avatar
Linus Torvalds committed
385 386 387 388 389 390 391 392 393
	help
	  Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
	  reboot your system when timeout is reached.

	  NOTE: once enabled, this timer cannot be disabled.

	  To compile this driver as a module, choose M here: the
	  module will be called sa1100_wdt.

394 395
config DW_WATCHDOG
	tristate "Synopsys DesignWare watchdog"
396
	depends on HAS_IOMEM
397
	select WATCHDOG_CORE
398 399
	help
	  Say Y here if to include support for the Synopsys DesignWare
400
	  watchdog timer found in many chips.
401 402 403
	  To compile this driver as a module, choose M here: the
	  module will be called dw_wdt.

404 405
config EP93XX_WATCHDOG
	tristate "EP93xx Watchdog"
406
	depends on ARCH_EP93XX || COMPILE_TEST
407
	select WATCHDOG_CORE
408 409 410 411 412 413 414
	help
	  Say Y here if to include support for the watchdog timer
	  embedded in the Cirrus Logic EP93xx family of devices.

	  To compile this driver as a module, choose M here: the
	  module will be called ep93xx_wdt.

415 416
config OMAP_WATCHDOG
	tristate "OMAP Watchdog"
417
	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || COMPILE_TEST
418
	select WATCHDOG_CORE
419
	help
420 421
	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
422

423
config PNX4008_WATCHDOG
424 425
	tristate "LPC32XX Watchdog"
	depends on ARCH_LPC32XX
426
	select WATCHDOG_CORE
427 428
	help
	  Say Y here if to include support for the watchdog timer
429
	  in the LPC32XX processor.
430 431 432 433 434
	  This driver can be built as a module by choosing M. The module
	  will be called pnx4008_wdt.

	  Say N if you are unsure.

435 436
config IOP_WATCHDOG
	tristate "IOP Watchdog"
437
	depends on ARCH_IOP13XX
438 439 440 441 442 443 444 445 446 447 448 449 450
	select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
	help
	  Say Y here if to include support for the watchdog timer
	  in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
	  be built as a module by choosing M. The module will
	  be called iop_wdt.

	  Note: The IOP13XX watchdog does an Internal Bus Reset which will
	  affect both cores and the peripherals of the IOP.  The ATU-X
	  and/or ATUe configuration registers will remain intact, but if
	  operating as an Root Complex and/or Central Resource, the PCI-X
	  and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.

451 452
config DAVINCI_WATCHDOG
	tristate "DaVinci watchdog"
453
	depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST
454
	select WATCHDOG_CORE
455 456
	help
	  Say Y here if to include support for the watchdog timer
457
	  in the DaVinci DM644x/DM646x or Keystone processors.
458 459 460 461 462 463
	  To compile this driver as a module, choose M here: the
	  module will be called davinci_wdt.

	  NOTE: once enabled, this timer cannot be disabled.
	  Say N if you are unsure.

464 465
config ORION_WATCHDOG
	tristate "Orion watchdog"
466
	depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110)
467
	depends on ARM
468
	select WATCHDOG_CORE
469 470
	help
	  Say Y here if to include support for the watchdog timer
471
	  in the Marvell Orion5x and Kirkwood ARM SoCs.
472
	  To compile this driver as a module, choose M here: the
473
	  module will be called orion_wdt.
474

475 476
config RN5T618_WATCHDOG
	tristate "Ricoh RN5T618 watchdog"
477
	depends on MFD_RN5T618 || COMPILE_TEST
478 479 480 481 482 483 484 485
	select WATCHDOG_CORE
	help
	  If you say yes here you get support for watchdog on the Ricoh
	  RN5T618 PMIC.

	  This driver can also be built as a module.  If so, the module
	  will be called rn5t618_wdt.

486 487
config SUNXI_WATCHDOG
	tristate "Allwinner SoCs watchdog support"
488
	depends on ARCH_SUNXI || COMPILE_TEST
489 490 491 492 493 494 495
	select WATCHDOG_CORE
	help
	  Say Y here to include support for the watchdog timer
	  in Allwinner SoCs.
	  To compile this driver as a module, choose M here: the
	  module will be called sunxi_wdt.

496 497
config COH901327_WATCHDOG
	bool "ST-Ericsson COH 901 327 watchdog"
498
	depends on ARCH_U300 || (ARM && COMPILE_TEST)
499
	default y if MACH_U300
500
	select WATCHDOG_CORE
501 502 503 504 505 506
	help
	  Say Y here to include Watchdog timer support for the
	  watchdog embedded into the ST-Ericsson U300 series platforms.
	  This watchdog is used to reset the system and thus cannot be
	  compiled as a module.

507 508 509
config TWL4030_WATCHDOG
	tristate "TWL4030 Watchdog"
	depends on TWL4030_CORE
510
	select WATCHDOG_CORE
511 512 513 514
	help
	  Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
	  watchdog timer support for TWL4030 chips.

515 516
config STMP3XXX_RTC_WATCHDOG
	tristate "Freescale STMP3XXX & i.MX23/28 watchdog"
517
	depends on RTC_DRV_STMP || COMPILE_TEST
518 519 520 521 522 523 524
	select WATCHDOG_CORE
	help
	  Say Y here to include support for the watchdog timer inside
	  the RTC for the STMP37XX/378X or i.MX23/28 SoC.
	  To compile this driver as a module, choose M here: the
	  module will be called stmp3xxx_rtc_wdt.

525 526
config NUC900_WATCHDOG
	tristate "Nuvoton NUC900 watchdog"
527
	depends on ARCH_W90X900 || COMPILE_TEST
528 529 530 531 532 533
	help
	  Say Y here if to include support for the watchdog timer
	  for the Nuvoton NUC900 series SoCs.
	  To compile this driver as a module, choose M here: the
	  module will be called nuc900_wdt.

534 535 536
config TS4800_WATCHDOG
	tristate "TS-4800 Watchdog"
	depends on HAS_IOMEM && OF
537
	depends on SOC_IMX51 || COMPILE_TEST
538 539 540 541 542 543 544
	select WATCHDOG_CORE
	select MFD_SYSCON
	help
	  Technologic Systems TS-4800 has watchdog timer implemented in
	  an external FPGA. Say Y here if you want to support for the
	  watchdog timer on TS-4800 board.

545 546
config TS72XX_WATCHDOG
	tristate "TS-72XX SBC Watchdog"
547
	depends on MACH_TS72XX || COMPILE_TEST
548 549 550 551 552 553 554 555
	help
	  Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
	  watchdog timer implemented in a external CPLD chip. Say Y here
	  if you want to support for the watchdog timer on TS-72XX boards.

	  To compile this driver as a module, choose M here: the
	  module will be called ts72xx_wdt.

556 557
config MAX63XX_WATCHDOG
	tristate "Max63xx watchdog"
558
	depends on HAS_IOMEM
559
	select WATCHDOG_CORE
560 561 562
	help
	  Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.

563 564
config MAX77620_WATCHDOG
	tristate "Maxim Max77620 Watchdog Timer"
565
	depends on MFD_MAX77620 || COMPILE_TEST
566 567 568 569 570 571
	help
	 This is the driver for the Max77620 watchdog timer.
	 Say 'Y' here to enable the watchdog timer support for
	 MAX77620 chips. To compile this driver as a module,
	 choose M here: the module will be called max77620_wdt.

572 573
config IMX2_WDT
	tristate "IMX2+ Watchdog"
574
	depends on ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
575
	select REGMAP_MMIO
576
	select WATCHDOG_CORE
577 578 579 580 581 582 583 584 585
	help
	  This is the driver for the hardware watchdog
	  on the Freescale IMX2 and later processors.
	  If you have one of these processors and wish to have
	  watchdog support enabled, say Y, otherwise say N.

	  To compile this driver as a module, choose M here: the
	  module will be called imx2_wdt.

586 587
config UX500_WATCHDOG
	tristate "ST-Ericsson Ux500 watchdog"
588
	depends on MFD_DB8500_PRCMU
589 590 591 592 593 594 595 596 597
	select WATCHDOG_CORE
	default y
	help
	  Say Y here to include Watchdog timer support for the watchdog
	  existing in the prcmu of ST-Ericsson Ux500 series platforms.

	  To compile this driver as a module, choose M here: the
	  module will be called ux500_wdt.

598 599
config RETU_WATCHDOG
	tristate "Retu watchdog"
600
	depends on MFD_RETU
601 602 603 604 605 606 607 608 609
	select WATCHDOG_CORE
	help
	  Retu watchdog driver for Nokia Internet Tablets (770, N800,
	  N810). At least on N800 the watchdog cannot be disabled, so
	  this driver is essential and you should enable it.

	  To compile this driver as a module, choose M here: the
	  module will be called retu_wdt.

610 611
config MOXART_WDT
	tristate "MOXART watchdog"
612
	depends on ARCH_MOXART || COMPILE_TEST
613 614 615 616 617 618 619
	help
	  Say Y here to include Watchdog timer support for the watchdog
	  existing on the MOXA ART SoC series platforms.

	  To compile this driver as a module, choose M here: the
	  module will be called moxart_wdt.

620 621
config SIRFSOC_WATCHDOG
	tristate "SiRFSOC watchdog"
622
	depends on ARCH_SIRF || COMPILE_TEST
623 624 625 626 627 628
	select WATCHDOG_CORE
	default y
	help
	  Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
	  the watchdog triggers the system will be reset.

629 630
config ST_LPC_WATCHDOG
	tristate "STMicroelectronics LPC Watchdog"
631
	depends on ARCH_STI || COMPILE_TEST
632 633 634 635 636 637 638 639 640
	depends on OF
	select WATCHDOG_CORE
	help
	  Say Y here to include STMicroelectronics Low Power Controller
	  (LPC) based Watchdog timer support.

	  To compile this driver as a module, choose M here: the
	  module will be called st_lpc_wdt.

Andrew Chew's avatar
Andrew Chew committed
641 642
config TEGRA_WATCHDOG
	tristate "Tegra watchdog"
643
	depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
Andrew Chew's avatar
Andrew Chew committed
644 645 646 647 648 649 650 651
	select WATCHDOG_CORE
	help
	  Say Y here to include support for the watchdog timer
	  embedded in NVIDIA Tegra SoCs.

	  To compile this driver as a module, choose M here: the
	  module will be called tegra_wdt.

652 653 654
config QCOM_WDT
	tristate "QCOM watchdog"
	depends on HAS_IOMEM
655
	depends on ARCH_QCOM || COMPILE_TEST
656 657 658 659 660 661 662 663 664
	select WATCHDOG_CORE
	help
	  Say Y here to include Watchdog timer support for the watchdog found
	  on QCOM chipsets.  Currently supported targets are the MSM8960,
	  APQ8064, and IPQ8064.

	  To compile this driver as a module, choose M here: the
	  module will be called qcom_wdt.

665 666
config MESON_GXBB_WATCHDOG
	tristate "Amlogic Meson GXBB SoCs watchdog support"
667
	depends on ARCH_MESON || COMPILE_TEST
668 669 670 671 672 673 674
	select WATCHDOG_CORE
	help
	  Say Y here to include support for the watchdog timer
	  in Amlogic Meson GXBB SoCs.
	  To compile this driver as a module, choose M here: the
	  module will be called meson_gxbb_wdt.

Carlo Caione's avatar
Carlo Caione committed
675 676
config MESON_WATCHDOG
	tristate "Amlogic Meson SoCs watchdog support"
677
	depends on ARCH_MESON || COMPILE_TEST
Carlo Caione's avatar
Carlo Caione committed
678 679 680 681 682 683 684
	select WATCHDOG_CORE
	help
	  Say Y here to include support for the watchdog timer
	  in Amlogic Meson SoCs.
	  To compile this driver as a module, choose M here: the
	  module will be called meson_wdt.

685 686
config MEDIATEK_WATCHDOG
	tristate "Mediatek SoCs watchdog support"
687
	depends on ARCH_MEDIATEK || COMPILE_TEST
688 689 690 691 692 693 694
	select WATCHDOG_CORE
	help
	  Say Y here to include support for the watchdog timer
	  in Mediatek SoCs.
	  To compile this driver as a module, choose M here: the
	  module will be called mtk_wdt.

695 696
config DIGICOLOR_WATCHDOG
	tristate "Conexant Digicolor SoCs watchdog support"
697
	depends on ARCH_DIGICOLOR || COMPILE_TEST
698 699 700 701 702 703 704
	select WATCHDOG_CORE
	help
	  Say Y here to include support for the watchdog timer
	  in Conexant Digicolor SoCs.
	  To compile this driver as a module, choose M here: the
	  module will be called digicolor_wdt.

705 706 707
config LPC18XX_WATCHDOG
	tristate "LPC18xx/43xx Watchdog"
	depends on ARCH_LPC18XX || COMPILE_TEST
708
	depends on HAS_IOMEM
709 710 711 712 713 714 715 716
	select WATCHDOG_CORE
	help
	  Say Y here if to include support for the watchdog timer
	  in NXP LPC SoCs family, which includes LPC18xx/LPC43xx
	  processors.
	  To compile this driver as a module, choose M here: the
	  module will be called lpc18xx_wdt.

717 718
config ATLAS7_WATCHDOG
	tristate "CSRatlas7 watchdog"
719
	depends on ARCH_ATLAS7 || COMPILE_TEST
720 721 722 723 724 725 726
	help
	  Say Y here to include Watchdog timer support for the watchdog
	  existing on the CSRatlas7 series platforms.

	  To compile this driver as a module, choose M here: the
	  module will be called atlas7_wdt.

727 728 729 730 731 732 733 734
config RENESAS_WDT
	tristate "Renesas WDT Watchdog"
	depends on ARCH_RENESAS || COMPILE_TEST
	select WATCHDOG_CORE
	help
	  This driver adds watchdog support for the integrated watchdogs in the
	  Renesas R-Car and other SH-Mobile SoCs (usually named RWDT or SWDT).

Chris Brandt's avatar
Chris Brandt committed
735 736 737 738 739 740 741 742
config RENESAS_RZAWDT
	tristate "Renesas RZ/A WDT Watchdog"
	depends on ARCH_RENESAS || COMPILE_TEST
	select WATCHDOG_CORE
	help
	  This driver adds watchdog support for the integrated watchdogs in the
	  Renesas RZ/A SoCs. These watchdogs can be used to reset a system.

743 744 745 746 747 748 749 750 751 752 753 754 755
config ASPEED_WATCHDOG
	tristate "Aspeed 2400 watchdog support"
	depends on ARCH_ASPEED || COMPILE_TEST
	select WATCHDOG_CORE
	help
	  Say Y here to include support for the watchdog timer
	  in Apseed BMC SoCs.

	  This driver is required to reboot the SoC.

	  To compile this driver as a module, choose M here: the
	  module will be called aspeed_wdt.

756 757 758 759 760 761 762 763 764 765
config ZX2967_WATCHDOG
	tristate "ZTE zx2967 SoCs watchdog support"
	depends on ARCH_ZX
	select WATCHDOG_CORE
	help
	  Say Y here to include support for the watchdog timer
	  in ZTE zx2967 SoCs.
	  To compile this driver as a module, choose M here: the
	  module will be called zx2967_wdt.

766 767 768 769 770 771 772 773 774 775 776 777
config STM32_WATCHDOG
	tristate "STM32 Independent WatchDoG (IWDG) support"
	depends on ARCH_STM32
	select WATCHDOG_CORE
	default y
	help
	  Say Y here to include support for the watchdog timer
	  in stm32 SoCs.

	  To compile this driver as a module, choose M here: the
	  module will be called stm32_iwdg.

778 779 780 781 782 783 784 785 786 787 788 789
config UNIPHIER_WATCHDOG
	tristate "UniPhier watchdog support"
	depends on ARCH_UNIPHIER || COMPILE_TEST
	depends on OF && MFD_SYSCON
	select WATCHDOG_CORE
	help
	  Say Y here to include support watchdog timer embedded
	  into the UniPhier system.

	  To compile this driver as a module, choose M here: the
	  module will be called uniphier_wdt.

790 791 792 793
# AVR32 Architecture

config AT32AP700X_WDT
	tristate "AT32AP700x watchdog"
794
	depends on CPU_AT32AP700X || COMPILE_TEST
795 796 797 798
	help
	  Watchdog timer embedded into AT32AP700x devices. This will reboot
	  your system when the timeout is reached.

799
# BLACKFIN Architecture
800 801 802

config BFIN_WDT
	tristate "Blackfin On-Chip Watchdog Timer"
803
	depends on BLACKFIN
804 805 806 807 808 809 810 811
	---help---
	  If you say yes here you will get support for the Blackfin On-Chip
	  Watchdog Timer. If you have one of these processors and wish to
	  have watchdog support enabled, say Y, otherwise say N.

	  To compile this driver as a module, choose M here: the
	  module will be called bfin_wdt.

812 813 814 815
# CRIS Architecture

# FRV Architecture

Linus Torvalds's avatar
Linus Torvalds committed
816 817 818 819
# X86 (i386 + ia64 + x86_64) Architecture

config ACQUIRE_WDT
	tristate "Acquire SBC Watchdog Timer"
820
	depends on X86
Linus Torvalds's avatar
Linus Torvalds committed
821 822 823 824 825 826 827 828 829 830 831 832 833
	---help---
	  This is the driver for the hardware watchdog on Single Board
	  Computers produced by Acquire Inc (and others). This watchdog
	  simply watches your kernel to make sure it doesn't freeze, and if
	  it does, it reboots your computer after a certain amount of time.

	  To compile this driver as a module, choose M here: the
	  module will be called acquirewdt.

	  Most people will say N.

config ADVANTECH_WDT
	tristate "Advantech SBC Watchdog Timer"
834
	depends on X86
Linus Torvalds's avatar
Linus Torvalds committed
835 836 837 838 839 840 841 842
	help
	  If you are configuring a Linux kernel for the Advantech single-board
	  computer, say `Y' here to support its built-in watchdog timer
	  feature. More information can be found at
	  <http://www.advantech.com.tw/products/>

config ALIM1535_WDT
	tristate "ALi M1535 PMU Watchdog Timer"
843
	depends on X86 && PCI
Linus Torvalds's avatar
Linus Torvalds committed
844 845 846 847 848 849 850 851 852 853
	---help---
	  This is the driver for the hardware watchdog on the ALi M1535 PMU.

	  To compile this driver as a module, choose M here: the
	  module will be called alim1535_wdt.

	  Most people will say N.

config ALIM7101_WDT
	tristate "ALi M7101 PMU Computer Watchdog"
854
	depends on PCI
Linus Torvalds's avatar
Linus Torvalds committed
855 856
	help
	  This is the driver for the hardware watchdog on the ALi M7101 PMU
857 858
	  as used in the x86 Cobalt servers and also found in some
	  SPARC Netra servers too.
Linus Torvalds's avatar
Linus Torvalds committed
859 860 861 862 863 864

	  To compile this driver as a module, choose M here: the
	  module will be called alim7101_wdt.

	  Most people will say N.

865 866
config EBC_C384_WDT
	tristate "WinSystems EBC-C384 Watchdog Timer"
867
	depends on X86 && ISA_BUS_API
868 869 870 871 872 873
	select WATCHDOG_CORE
	help
	  Enables watchdog timer support for the watchdog timer on the
	  WinSystems EBC-C384 motherboard. The timeout may be configured via
	  the timeout module parameter.

874
config F71808E_WDT
875
	tristate "Fintek F718xx, F818xx Super I/O Watchdog"
876
	depends on X86
877
	help
878 879 880
	  This is the driver for the hardware watchdog on the Fintek F71808E,
	  F71862FG, F71868, F71869, F71882FG, F71889FG, F81865 and F81866
	  Super I/O controllers.
881 882 883 884

	  You can compile this driver directly into the kernel, or use
	  it as a module.  The module will be called f71808e_wdt.

885 886 887 888 889 890 891 892 893 894 895
config SP5100_TCO
	tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
	depends on X86 && PCI
	---help---
	  Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
	  (Total Cost of Ownership) timer is a watchdog timer that will reboot
	  the machine after its expiration. The expiration time can be
	  configured with the "heartbeat" parameter.

	  To compile this driver as a module, choose M here: the
	  module will be called sp5100_tco.
896

897 898
config GEODE_WDT
	tristate "AMD Geode CS5535/CS5536 Watchdog"
899
	depends on CS5535_MFGPT
900 901 902 903 904 905 906 907 908 909
	help
	  This driver enables a watchdog capability built into the
	  CS5535/CS5536 companion chips for the AMD Geode GX and LX
	  processors.  This watchdog watches your kernel to make sure
	  it doesn't freeze, and if it does, it reboots your computer after
	  a certain amount of time.

	  You can compile this driver directly into the kernel, or use
	  it as a module.  The module will be called geodewdt.

Linus Torvalds's avatar
Linus Torvalds committed
910 911
config SC520_WDT
	tristate "AMD Elan SC520 processor Watchdog"
912
	depends on MELAN || COMPILE_TEST
Linus Torvalds's avatar
Linus Torvalds committed
913 914 915 916 917 918 919 920 921 922
	help
	  This is the driver for the hardware watchdog built in to the
	  AMD "Elan" SC520 microcomputer commonly used in embedded systems.
	  This watchdog simply watches your kernel to make sure it doesn't
	  freeze, and if it does, it reboots your computer after a certain
	  amount of time.

	  You can compile this driver directly into the kernel, or use
	  it as a module.  The module will be called sc520_wdt.

923 924 925 926
config SBC_FITPC2_WATCHDOG
	tristate "Compulab SBC-FITPC2 watchdog"
	depends on X86
	---help---
927 928
	  This is the driver for the built-in watchdog timer on the fit-PC2,
	  fit-PC2i, CM-iAM single-board computers made by Compulab.
929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944

	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.

	  Entering BIOS setup temporary disables watchdog operation regardless to current state,
	  so system will not be restarted while user in BIOS setup.

	  Once watchdog was enabled the system will be restarted every
	  "Watchdog Timer Value" period, so to prevent it user can restart or
	  disable the watchdog.

	  To compile this driver as a module, choose M here: the
	  module will be called sbc_fitpc2_wdt.

	  Most people will say N.

Linus Torvalds's avatar
Linus Torvalds committed
945 946
config EUROTECH_WDT
	tristate "Eurotech CPU-1220/1410 Watchdog Timer"
947
	depends on X86
Linus Torvalds's avatar
Linus Torvalds committed
948 949 950 951 952 953 954
	help
	  Enable support for the watchdog timer on the Eurotech CPU-1220 and
	  CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
	  information are at <http://www.eurotech.it/>.

config IB700_WDT
	tristate "IB700 SBC Watchdog Timer"
955
	depends on X86
Linus Torvalds's avatar
Linus Torvalds committed
956 957 958 959 960 961 962 963 964 965 966 967 968
	---help---
	  This is the driver for the hardware watchdog on the IB700 Single
	  Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
	  simply watches your kernel to make sure it doesn't freeze, and if
	  it does, it reboots your computer after a certain amount of time.

	  This driver is like the WDT501 driver but for slightly different hardware.

	  To compile this driver as a module, choose M here: the
	  module will be called ib700wdt.

	  Most people will say N.

969
config IBMASR
Wim Van Sebroeck's avatar
Wim Van Sebroeck committed
970
	tristate "IBM Automatic Server Restart"
971
	depends on X86
Wim Van Sebroeck's avatar
Wim Van Sebroeck committed
972
	help
973
	  This is the driver for the IBM Automatic Server Restart watchdog
Wim Van Sebroeck's avatar
Wim Van Sebroeck committed
974
	  timer built-in into some eServer xSeries machines.
975 976 977 978

	  To compile this driver as a module, choose M here: the
	  module will be called ibmasr.

Linus Torvalds's avatar
Linus Torvalds committed
979
config WAFER_WDT
980
	tristate "ICP Single Board Computer Watchdog Timer"
981
	depends on X86
Linus Torvalds's avatar
Linus Torvalds committed
982
	help
983 984 985
	  This is a driver for the hardware watchdog on the ICP Single
	  Board Computer. This driver is working on (at least) the following
	  IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
Linus Torvalds's avatar
Linus Torvalds committed
986 987 988 989

	  To compile this driver as a module, choose M here: the
	  module will be called wafer5823wdt.

David Hardeman's avatar
David Hardeman committed
990 991
config I6300ESB_WDT
	tristate "Intel 6300ESB Timer/Watchdog"
992
	depends on PCI
David Hardeman's avatar
David Hardeman committed
993 994 995 996 997 998 999
	---help---
	  Hardware driver for the watchdog timer built into the Intel
	  6300ESB controller hub.

	  To compile this driver as a module, choose M here: the
	  module will be called i6300esb.

1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012
config IE6XX_WDT
	tristate "Intel Atom E6xx Watchdog"
	depends on X86 && PCI
	select WATCHDOG_CORE
	select MFD_CORE
	select LPC_SCH
	---help---
	  Hardware driver for the watchdog timer built into the Intel
	  Atom E6XX (TunnelCreek) processor.

	  To compile this driver as a module, choose M here: the
	  module will be called ie6xx_wdt.

1013 1014
config INTEL_SCU_WATCHDOG
	bool "Intel SCU Watchdog for Mobile Platforms"
1015
	depends on X86_INTEL_MID
1016 1017 1018 1019 1020 1021
	---help---
	  Hardware driver for the watchdog time built into the Intel SCU
	  for Intel Mobile Platforms.

	  To compile this driver as a module, choose M here.

1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034
config INTEL_MID_WATCHDOG
	tristate "Intel MID Watchdog Timer"
	depends on X86_INTEL_MID
	select WATCHDOG_CORE
	---help---
	  Watchdog timer driver built into the Intel SCU for Intel MID
	  Platforms.

	  This driver currently supports only the watchdog evolution
	  implementation in SCU, available for Merrifield generation.

	  To compile this driver as a module, choose M here.

1035
config ITCO_WDT
1036
	tristate "Intel TCO Timer/Watchdog"
1037
	depends on (X86 || IA64) && PCI
1038
	select WATCHDOG_CORE
1039
	depends on I2C || I2C=n
1040
	select LPC_ICH if !EXPERT
1041
	select I2C_I801 if !EXPERT && I2C
1042 1043 1044
	---help---
	  Hardware driver for the intel TCO timer based watchdog devices.
	  These drivers are included in the Intel 82801 I/O Controller
1045
	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059
	  controller hub.

	  The TCO (Total Cost of Ownership) timer is a watchdog timer
	  that will reboot the machine after its second expiration. The
	  expiration time can be configured with the "heartbeat" parameter.

	  On some motherboards the driver may fail to reset the chipset's
	  NO_REBOOT flag which prevents the watchdog from rebooting the
	  machine. If this is the case you will get a kernel message like
	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".

	  To compile this driver as a module, choose M here: the
	  module will be called iTCO_wdt.

1060 1061 1062 1063 1064 1065 1066 1067
config ITCO_VENDOR_SUPPORT
	bool "Intel TCO Timer/Watchdog Specific Vendor Support"
	depends on ITCO_WDT
	---help---
	  Add vendor specific support to the intel TCO timer based watchdog
	  devices. At this moment we only have additional support for some
	  SuperMicro Inc. motherboards.

1068 1069 1070 1071 1072 1073 1074
config IT8712F_WDT
	tristate "IT8712F (Smart Guardian) Watchdog Timer"
	depends on X86
	---help---
	  This is the driver for the built-in watchdog timer on the IT8712F
	  Super I/0 chipset used on many motherboards.

1075 1076 1077
	  If the driver does not work, then make sure that the game port in
	  the BIOS is enabled.

1078 1079 1080
	  To compile this driver as a module, choose M here: the
	  module will be called it8712f_wdt.

1081 1082
config IT87_WDT
	tristate "IT87 Watchdog Timer"
1083
	depends on X86
1084
	select WATCHDOG_CORE
1085
	---help---
1086 1087 1088 1089
	  This is the driver for the hardware watchdog on the ITE IT8607,
	  IT8620, IT8622, IT8625, IT8628, IT8655, IT8665, IT8686, IT8702,
	  IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, IT8728, and
	  IT8783 Super I/O chips.
1090

1091 1092 1093
	  This watchdog simply watches your kernel to make sure it doesn't
	  freeze, and if it does, it reboots your computer after a certain
	  amount of time.
1094 1095 1096 1097

	  To compile this driver as a module, choose M here: the module will
	  be called it87_wdt.

1098
config HP_WATCHDOG
1099
	tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
Randy Dunlap's avatar
Randy Dunlap committed
1100
	depends on X86 && PCI
1101 1102
	help
	  A software monitoring watchdog and NMI sourcing driver. This driver
1103
	  will detect lockups and provide a stack trace. This is a driver that
1104
	  will only load on an HP ProLiant system with a minimum of iLO2 support.
1105 1106 1107
	  To compile this driver as a module, choose M here: the module will be
	  called hpwdt.

1108 1109
config KEMPLD_WDT
	tristate "Kontron COM Watchdog Timer"
1110
	depends on MFD_KEMPLD
1111 1112 1113 1114 1115 1116 1117 1118
	select WATCHDOG_CORE
	help
	  Support for the PLD watchdog on some Kontron ETX and COMexpress
	  (ETXexpress) modules

	  This driver can also be built as a module. If so, the module will be
	  called kempld_wdt.

1119 1120 1121
config HPWDT_NMI_DECODING
	bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
	depends on HP_WATCHDOG
1122
	default y
1123 1124 1125
	help
	  When an NMI occurs this feature will make the necessary BIOS calls to
	  log the cause of the NMI.
1126

Linus Torvalds's avatar
Linus Torvalds committed
1127 1128
config SC1200_WDT
	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
1129
	depends on X86
Linus Torvalds's avatar
Linus Torvalds committed
1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142
	help
	  This is a driver for National Semiconductor PC87307/PC97307 hardware
	  watchdog cards as found on the SC1200. This watchdog is mainly used
	  for power management purposes and can be used to power down the device
	  during inactivity periods (includes interrupt activity monitoring).

	  To compile this driver as a module, choose M here: the
	  module will be called sc1200wdt.

	  Most people will say N.

config SCx200_WDT
	tristate "National Semiconductor SCx200 Watchdog"
1143
	depends on SCx200 && PCI
Linus Torvalds's avatar
Linus Torvalds committed
1144 1145 1146 1147 1148 1149
	help
	  Enable the built-in watchdog timer support on the National
	  Semiconductor SCx200 processors.

	  If compiled as a module, it will be called scx200_wdt.

1150 1151
config PC87413_WDT
	tristate "NS PC87413 watchdog"
1152
	depends on X86
1153 1154 1155 1156 1157 1158 1159 1160 1161 1162
	---help---
	  This is the driver for the hardware watchdog on the PC87413 chipset
	  This watchdog simply watches your kernel to make sure it doesn't
	  freeze, and if it does, it reboots your computer after a certain
	  amount of time.

	  To compile this driver as a module, choose M here: the
	  module will be called pc87413_wdt.

	  Most people will say N.
1163

1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181
config NV_TCO
	tristate "nVidia TCO Timer/Watchdog"
	depends on X86 && PCI
	---help---
	  Hardware driver for the TCO timer built into the nVidia Hub family
	  (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
	  watchdog timer that will reboot the machine after its second
	  expiration. The expiration time can be configured with the
	  "heartbeat" parameter.

	  On some motherboards the driver may fail to reset the chipset's
	  NO_REBOOT flag which prevents the watchdog from rebooting the
	  machine. If this is the case you will get a kernel message like
	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".

	  To compile this driver as a module, choose M here: the
	  module will be called nv_tco.

1182 1183
config RDC321X_WDT
	tristate "RDC R-321x SoC watchdog"
1184
	depends on X86_RDC321X || COMPILE_TEST
1185
	depends on PCI
1186 1187 1188 1189 1190 1191 1192
	help
	  This is the driver for the built in hardware watchdog
	  in the RDC R-321x SoC.

	  To compile this driver as a module, choose M here: the
	  module will be called rdc321x_wdt.

Linus Torvalds's avatar
Linus Torvalds committed
1193 1194
config 60XX_WDT
	tristate "SBC-60XX Watchdog Timer"
1195
	depends on X86
Linus Torvalds's avatar
Linus Torvalds committed
1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206
	help
	  This driver can be used with the watchdog timer found on some
	  single board computers, namely the 6010 PII based computer.
	  It may well work with other cards.  It reads port 0x443 to enable
	  and re-set the watchdog timer, and reads port 0x45 to disable
	  the watchdog.  If you have a card that behave in similar ways,
	  you can probably make this driver work with your card as well.

	  You can compile this driver directly into the kernel, or use
	  it as a module.  The module will be called sbc60xxwdt.

1207 1208
config SBC8360_WDT
	tristate "SBC8360 Watchdog Timer"
1209
	depends on X86_32
1210 1211 1212 1213 1214 1215
	---help---

	  This is the driver for the hardware watchdog on the SBC8360 Single
	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).

	  To compile this driver as a module, choose M here: the
1216
	  module will be called sbc8360.
1217 1218 1219

	  Most people will say N.

Gilles Gigan's avatar
Gilles Gigan committed
1220 1221
config SBC7240_WDT
	tristate "SBC Nano 7240 Watchdog Timer"
Al Viro's avatar
Al Viro committed
1222
	depends on X86_32 && !UML
Gilles Gigan's avatar
Gilles Gigan committed
1223 1224 1225 1226 1227 1228 1229 1230 1231 1232
	---help---
	  This is the driver for the hardware watchdog found on the IEI
	  single board computers EPIC Nano 7240 (and likely others). This
	  watchdog simply watches your kernel to make sure it doesn't freeze,
	  and if it does, it reboots your computer after a certain amount of
	  time.

	  To compile this driver as a module, choose M here: the
	  module will be called sbc7240_wdt.

Linus Torvalds's avatar
Linus Torvalds committed
1233 1234
config CPU5_WDT
	tristate "SMA CPU5 Watchdog"
1235
	depends on X86
Linus Torvalds's avatar
Linus Torvalds committed
1236 1237 1238 1239 1240
	---help---
	  TBD.
	  To compile this driver as a module, choose M here: the
	  module will be called cpu5wdt.

1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252
config SMSC_SCH311X_WDT
	tristate "SMSC SCH311X Watchdog Timer"
	depends on X86
	---help---
	  This is the driver for the hardware watchdog timer on the
	  SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
	  (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
	  serial ports).

	  To compile this driver as a module, choose M here: the
	  module will be called sch311x_wdt.

1253 1254
config SMSC37B787_WDT
	tristate "Winbond SMsC37B787 Watchdog Timer"
1255
	depends on X86
1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272
	---help---
	  This is the driver for the hardware watchdog component on the
	  Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
	  from Vision Systems and maybe others.

	  This watchdog simply watches your kernel to make sure it doesn't
	  freeze, and if it does, it reboots your computer after a certain
	  amount of time.

	  Usually a userspace daemon will notify the kernel WDT driver that
	  userspace is still alive, at regular intervals.

	  To compile this driver as a module, choose M here: the
	  module will be called smsc37b787_wdt.

	  Most people will say N.

1273 1274
config VIA_WDT
	tristate "VIA Watchdog Timer"
1275
	depends on X86 && PCI
1276 1277 1278 1279 1280 1281 1282 1283 1284 1285
	select WATCHDOG_CORE
	---help---
	This is the driver for the hardware watchdog timer on VIA
	southbridge chipset CX700, VX800/VX820 or VX855/VX875.

	To compile this driver as a module, choose M here; the module
	will be called via_wdt.

	Most people will say N.

Linus Torvalds's avatar
Linus Torvalds committed
1286
config W83627HF_WDT
1287
	tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
1288
	depends on X86
1289
	select WATCHDOG_CORE
Linus Torvalds's avatar
Linus Torvalds committed
1290
	---help---
1291 1292 1293 1294 1295 1296
	  This is the driver for the hardware watchdog on the following
	  Super I/O chips.
		W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
		W83637HF
		W83667HG/HG-B
		W83687THF
1297 1298
		W83697HF
		W83697UG
1299 1300 1301
		NCT6775
		NCT6776
		NCT6779
1302 1303
		NCT6791
		NCT6792
1304
		NCT6102D/04D/06D
1305

1306 1307 1308
	  This watchdog simply watches your kernel to make sure it doesn't
	  freeze, and if it does, it reboots your computer after a certain
	  amount of time.
Linus Torvalds's avatar
Linus Torvalds committed
1309 1310 1311 1312 1313 1314 1315 1316

	  To compile this driver as a module, choose M here: the
	  module will be called w83627hf_wdt.

	  Most people will say N.

config W83877F_WDT
	tristate "W83877F (EMACS) Watchdog Timer"
1317
	depends on X86
Linus Torvalds's avatar
Linus Torvalds committed
1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329
	---help---
	  This is the driver for the hardware watchdog on the W83877F chipset
	  as used in EMACS PC-104 motherboards (and likely others).  This
	  watchdog simply watches your kernel to make sure it doesn't freeze,
	  and if it does, it reboots your computer after a certain amount of
	  time.

	  To compile this driver as a module, choose M here: the
	  module will be called w83877f_wdt.

	  Most people will say N.

1330 1331
config W83977F_WDT
	tristate "W83977F (PCM-5335) Watchdog Timer"
1332
	depends on X86
1333 1334 1335 1336 1337 1338 1339 1340 1341 1342
	---help---
	  This is the driver for the hardware watchdog on the W83977F I/O chip
	  as used in AAEON's PCM-5335 SBC (and likely others).  This
	  watchdog simply watches your kernel to make sure it doesn't freeze,
	  and if it does, it reboots your computer after a certain amount of
	  time.

	  To compile this driver as a module, choose M here: the
	  module will be called w83977f_wdt.

Linus Torvalds's avatar
Linus Torvalds committed
1343 1344
config MACHZ_WDT
	tristate "ZF MachZ Watchdog"
1345
	depends on X86
Linus Torvalds's avatar
Linus Torvalds committed
1346 1347
	---help---
	  If you are using a ZF Micro MachZ processor, say Y here, otherwise
Wim Van Sebroeck's avatar
Wim Van Sebroeck committed
1348
	  N.  This is the driver for the watchdog timer built-in on that
Linus Torvalds's avatar
Linus Torvalds committed
1349 1350 1351 1352 1353 1354 1355
	  processor using ZF-Logic interface.  This watchdog simply watches
	  your kernel to make sure it doesn't freeze, and if it does, it
	  reboots your computer after a certain amount of time.

	  To compile this driver as a module, choose M here: the
	  module will be called machzwd.

1356 1357
config SBC_EPX_C3_WATCHDOG
	tristate "Winsystems SBC EPX-C3 watchdog"
1358
	depends on X86
1359 1360 1361 1362 1363 1364 1365 1366
	---help---
	  This is the driver for the built-in watchdog timer on the EPX-C3
	  Single-board computer made by Winsystems, Inc.

	  *Note*: This hardware watchdog is not probeable and thus there
	  is no way to know if writing to its IO address will corrupt
	  your system or have any real effect.  The only way to be sure
	  that this driver does what you want is to make sure you
Matt LaPlante's avatar
Matt LaPlante committed
1367
	  are running it on an EPX-C3 from Winsystems with the watchdog
1368 1369 1370 1371 1372 1373 1374 1375 1376
	  timer at IO address 0x1ee and 0x1ef.  It will write to both those
	  IO ports.  Basically, the assumption is made that if you compile
	  this driver into your kernel and/or load it as a module, that you
	  know what you are doing and that you are in fact running on an
	  EPX-C3 board!

	  To compile this driver as a module, choose M here: the
	  module will be called sbc_epx_c3.

1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391
config INTEL_MEI_WDT
	tristate "Intel MEI iAMT Watchdog"
	depends on INTEL_MEI && X86
	select WATCHDOG_CORE
	---help---
	  A device driver for the Intel MEI iAMT watchdog.

	  The Intel AMT Watchdog is an OS Health (Hang/Crash) watchdog.
	  Whenever the OS hangs or crashes, iAMT will send an event
	  to any subscriber to this event. The watchdog doesn't reset the
	  the platform.

	  To compile this driver as a module, choose M here:
	  the module will be called mei_wdt.

1392 1393 1394 1395 1396 1397 1398 1399 1400 1401
config NI903X_WDT
	tristate "NI 903x/913x Watchdog"
	depends on X86 && ACPI
	select WATCHDOG_CORE
	---help---
	  This is the driver for the watchdog timer on the National Instruments
	  903x/913x real-time controllers.

	  To compile this driver as a module, choose M here: the module will be
	  called ni903x_wdt.
1402

1403 1404 1405 1406 1407 1408 1409 1410 1411 1412
config NIC7018_WDT
	tristate "NIC7018 Watchdog"
	depends on X86 && ACPI
	select WATCHDOG_CORE
	---help---
	  Support for National Instruments NIC7018 Watchdog.

	  To compile this driver as a module, choose M here: the module will be
	  called nic7018_wdt.

1413
# M32R Architecture
Linus Torvalds's avatar
Linus Torvalds committed
1414

1415 1416
# M68K Architecture

1417 1418
config M54xx_WATCHDOG
	tristate "MCF54xx watchdog support"
1419 1420 1421
	depends on M548x
	help
	  To compile this driver as a module, choose M here: the
1422
	  module will be called m54xx_wdt.
1423

1424 1425
# MicroBlaze Architecture

1426 1427
# MIPS Architecture

1428 1429
config ATH79_WDT
	tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog"
1430
	depends on ATH79 || (ARM && COMPILE_TEST)
1431 1432 1433 1434
	help
	  Hardware driver for the built-in watchdog timer on the Atheros
	  AR71XX/AR724X/AR913X SoCs.

1435 1436
config BCM47XX_WDT
	tristate "Broadcom BCM47xx Watchdog Timer"
1437
	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
1438
	select WATCHDOG_CORE
1439
	help
1440
	  Hardware driver for the Broadcom BCM47xx Watchdog Timer.
1441

1442 1443 1444 1445 1446 1447 1448 1449 1450 1451
config RC32434_WDT
	tristate "IDT RC32434 SoC Watchdog Timer"
	depends on MIKROTIK_RB532
	help
	  Hardware driver for the IDT RC32434 SoC built-in
	  watchdog timer.

	  To compile this driver as a module, choose M here: the
	  module will be called rc32434_wdt.

1452 1453
config INDYDOG
	tristate "Indy/I2 Hardware Watchdog"
1454
	depends on SGI_HAS_INDYDOG || (MIPS && COMPILE_TEST)
1455 1456 1457 1458 1459 1460
	help
	  Hardware driver for the Indy's/I2's watchdog. This is a
	  watchdog timer that will reboot the machine after a 60 second
	  timer expired and no process has written to /dev/watchdog during
	  that time.

1461 1462
config JZ4740_WDT
	tristate "Ingenic jz4740 SoC hardware watchdog"
1463
	depends on MACH_JZ4740 || MACH_JZ4780
1464
	select WATCHDOG_CORE
1465 1466 1467
	help
	  Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.

1468 1469
config WDT_MTX1
	tristate "MTX-1 Hardware Watchdog"
1470
	depends on MIPS_MTX1 || (MIPS && COMPILE_TEST)
1471 1472 1473 1474
	help
	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
	  will reboot the machine after a 100 seconds timer expired.

Daniel Laird's avatar
Daniel Laird committed
1475 1476 1477
config PNX833X_WDT
	tristate "PNX833x Hardware Watchdog"
	depends on SOC_PNX8335
1478
	depends on BROKEN
Daniel Laird's avatar
Daniel Laird committed
1479 1480
	help
	  Hardware driver for the PNX833x's watchdog. This is a
Lucas De Marchi's avatar
Lucas De Marchi committed
1481
	  watchdog timer that will reboot the machine after a programmable
Daniel Laird's avatar
Daniel Laird committed
1482 1483 1484
	  timer has expired and no process has written to /dev/watchdog during
	  that time.

1485 1486
config SIBYTE_WDOG
	tristate "Sibyte SoC hardware watchdog"
1487
	depends on CPU_SB1 || (MIPS && COMPILE_TEST)
1488 1489 1490 1491 1492 1493 1494 1495 1496 1497
	help
	  Watchdog driver for the built in watchdog hardware in Sibyte
	  SoC processors.  There are apparently two watchdog timers
	  on such processors; this driver supports only the first one,
	  because currently Linux only supports exporting one watchdog
	  to userspace.

	  To compile this driver as a loadable module, choose M here.
	  The module will be called sb_wdog.

Matteo Croce's avatar
Matteo Croce committed
1498 1499
config AR7_WDT
	tristate "TI AR7 Watchdog Timer"
1500
	depends on AR7 || (MIPS && COMPILE_TEST)
Matteo Croce's avatar
Matteo Croce committed
1501 1502 1503
	help
	  Hardware driver for the TI AR7 Watchdog Timer.

1504 1505
config TXX9_WDT
	tristate "Toshiba TXx9 Watchdog Timer"
1506
	depends on CPU_TX39XX || CPU_TX49XX || (MIPS && COMPILE_TEST)
1507
	select WATCHDOG_CORE
1508 1509 1510
	help
	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.

1511 1512
config OCTEON_WDT
	tristate "Cavium OCTEON SOC family Watchdog Timer"
1513
	depends on CAVIUM_OCTEON_SOC
1514
	default y
1515
	select WATCHDOG_CORE
1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529
	select EXPORT_UASM if OCTEON_WDT = m
	help
	  Hardware driver for OCTEON's on chip watchdog timer.
	  Enables the watchdog for all cores running Linux. It
	  installs a NMI handler and pokes the watchdog based on an
	  interrupt.  On first expiration of the watchdog, the
	  interrupt handler pokes it.  The second expiration causes an
	  NMI that prints a message. The third expiration causes a
	  global soft reset.

	  When userspace has /dev/watchdog open, no poking is done
	  from the first interrupt, it is then only poked when the
	  device is written.

1530 1531 1532 1533 1534 1535 1536 1537 1538 1539
config BCM63XX_WDT
	tristate "Broadcom BCM63xx hardware watchdog"
	depends on BCM63XX
	help
	  Watchdog driver for the built in watchdog hardware in Broadcom
	  BCM63xx SoC.

	  To compile this driver as a loadable module, choose M here.
	  The module will be called bcm63xx_wdt.

1540 1541
config BCM2835_WDT
	tristate "Broadcom BCM2835 hardware watchdog"
1542
	depends on ARCH_BCM2835 || (OF && COMPILE_TEST)
1543 1544 1545 1546 1547 1548 1549 1550
	select WATCHDOG_CORE
	help
	  Watchdog driver for the built in watchdog hardware in Broadcom
	  BCM2835 SoC.

	  To compile this driver as a loadable module, choose M here.
	  The module will be called bcm2835_wdt.