Commit b7f0b8ad authored by Christopher Bostic's avatar Christopher Bostic Committed by Wim Van Sebroeck

drivers/watchdog: ASPEED reference dev tree properties for config

Reference the system device tree when configuring the watchdog
engines. If property 'aspeed,reset_type' is present then set
reset behavior based on the specified value.  This can be one of
three different mutually exclusive values
  * cpu - Reset CPU only on watchdog timeout
  * soc - Reset System on Chip
  * system - Full system reset

No reset can also be specified by indicating:
  * none - No reset, assumes another watchdog is responsible for
           this.

Add optional property 'aspeed,external-signal'. If present then
configure to generate external signal on watchdog timeout.
Signed-off-by: default avatarChristopher Bostic <cbostic@linux.vnet.ibm.com>
Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
parent a1f2a820
...@@ -36,6 +36,7 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table); ...@@ -36,6 +36,7 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
#define WDT_CTRL 0x0C #define WDT_CTRL 0x0C
#define WDT_CTRL_RESET_MODE_SOC (0x00 << 5) #define WDT_CTRL_RESET_MODE_SOC (0x00 << 5)
#define WDT_CTRL_RESET_MODE_FULL_CHIP (0x01 << 5) #define WDT_CTRL_RESET_MODE_FULL_CHIP (0x01 << 5)
#define WDT_CTRL_RESET_MODE_ARM_CPU (0x10 << 5)
#define WDT_CTRL_1MHZ_CLK BIT(4) #define WDT_CTRL_1MHZ_CLK BIT(4)
#define WDT_CTRL_WDT_EXT BIT(3) #define WDT_CTRL_WDT_EXT BIT(3)
#define WDT_CTRL_WDT_INTR BIT(2) #define WDT_CTRL_WDT_INTR BIT(2)
...@@ -140,6 +141,8 @@ static int aspeed_wdt_probe(struct platform_device *pdev) ...@@ -140,6 +141,8 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
{ {
struct aspeed_wdt *wdt; struct aspeed_wdt *wdt;
struct resource *res; struct resource *res;
struct device_node *np;
const char *reset_type;
int ret; int ret;
wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
...@@ -164,14 +167,30 @@ static int aspeed_wdt_probe(struct platform_device *pdev) ...@@ -164,14 +167,30 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT; wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT;
watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev); watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
wdt->ctrl = WDT_CTRL_1MHZ_CLK;
/* /*
* Control reset on a per-device basis to ensure the * Control reset on a per-device basis to ensure the
* host is not affected by a BMC reboot, so only reset * host is not affected by a BMC reboot
* the SOC and not the full chip
*/ */
wdt->ctrl = WDT_CTRL_RESET_MODE_SOC | np = pdev->dev.of_node;
WDT_CTRL_1MHZ_CLK | ret = of_property_read_string(np, "aspeed,reset-type", &reset_type);
WDT_CTRL_RESET_SYSTEM; if (ret) {
wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC | WDT_CTRL_RESET_SYSTEM;
} else {
if (!strcmp(reset_type, "cpu"))
wdt->ctrl |= WDT_CTRL_RESET_MODE_ARM_CPU;
else if (!strcmp(reset_type, "soc"))
wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC;
else if (!strcmp(reset_type, "system"))
wdt->ctrl |= WDT_CTRL_RESET_SYSTEM;
else if (strcmp(reset_type, "none"))
return -EINVAL;
}
if (of_property_read_bool(np, "aspeed,external-signal"))
wdt->ctrl |= WDT_CTRL_WDT_EXT;
writel(wdt->ctrl, wdt->base + WDT_CTRL);
if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE) { if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE) {
aspeed_wdt_start(&wdt->wdd); aspeed_wdt_start(&wdt->wdd);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment