Commit a371c10e authored by Anup Patel's avatar Anup Patel Committed by Jassi Brar

mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence

As-per suggestion from FlexRM HW folks, we have to first set
FlexRM ring flush state and then clear it for FlexRM ring flush
to work properly.

Currently, the FlexRM driver has incomplete FlexRM ring flush
sequence which causes repeated insmod+rmmod of mailbox client
drivers to fail.

This patch fixes FlexRM ring flush sequence in flexrm_shutdown()
as described above.

Fixes: dbc049ee ("mailbox: Add driver for Broadcom FlexRM
ring manager")
Signed-off-by: default avatarAnup Patel <anup.patel@broadcom.com>
Reviewed-by: default avatarScott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJassi Brar <jaswinder.singh@linaro.org>
parent 15f859ae
......@@ -1365,8 +1365,8 @@ static void flexrm_shutdown(struct mbox_chan *chan)
/* Disable/inactivate ring */
writel_relaxed(0x0, ring->regs + RING_CONTROL);
/* Flush ring with timeout of 1s */
timeout = 1000;
/* Set ring flush state */
timeout = 1000; /* timeout of 1s */
writel_relaxed(BIT(CONTROL_FLUSH_SHIFT),
ring->regs + RING_CONTROL);
do {
......@@ -1374,7 +1374,23 @@ static void flexrm_shutdown(struct mbox_chan *chan)
FLUSH_DONE_MASK)
break;
mdelay(1);
} while (timeout--);
} while (--timeout);
if (!timeout)
dev_err(ring->mbox->dev,
"setting ring%d flush state timedout\n", ring->num);
/* Clear ring flush state */
timeout = 1000; /* timeout of 1s */
writel_relaxed(0x0, ring + RING_CONTROL);
do {
if (!(readl_relaxed(ring + RING_FLUSH_DONE) &
FLUSH_DONE_MASK))
break;
mdelay(1);
} while (--timeout);
if (!timeout)
dev_err(ring->mbox->dev,
"clearing ring%d flush state timedout\n", ring->num);
/* Abort all in-flight requests */
for (reqid = 0; reqid < RING_MAX_REQ_COUNT; reqid++) {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment