1. 02 Nov, 2017 1 commit
    • Greg Kroah-Hartman's avatar
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      Greg Kroah-Hartman authored
      Many source files in the tree are missing licensing information, which
      makes it harder for compliance tools to determine the correct license.
      
      By default all files without license information are under the default
      license of the kernel, which is GPL version 2.
      
      Update the files which contain no license information with the 'GPL-2.0'
      SPDX license identifier.  The SPDX identifier is a legally binding
      shorthand, which can be used instead of the full boiler plate text.
      
      This patch is based on work done by Thomas Gleixner and Kate Stewart and
      Philippe Ombredanne.
      
      How this work was done:
      
      Patches were generated and checked against linux-4.14-rc6 for a subset of
      the use cases:
       - file had no licensing information it it.
       - file was a */uapi/* one with no licensing information in it,
       - file was a */uapi/* one with existing licensing information,
      
      Further patches will be generated in subsequent months to fix up cases
      where non-standard license headers were used, and references to license
      had to be inferred by heuristics based on keywords.
      
      The analysis to determine which SPDX License Identifier to be applied to
      a file was done in a spreadsheet of side by side results from of the
      output of two independent scanners (ScanCode & Windriver) producing SPDX
      tag:value files created by Philippe Ombredanne.  Philippe prepared the
      base worksheet, and did an initial spot review of a few 1000 files.
      
      The 4.13 kernel was the starting point of the analysis with 60,537 files
      assessed.  Kate Stewart did a file by file comparison of the scanner
      results in the spreadsheet to determine which SPDX license identifier(s)
      to be applied to the file. She confirmed any determination that was not
      immediately clear with lawyers working with the Linux Foundation.
      
      Criteria used to select files for SPDX license identifier tagging was:
       - Files considered eligible had to be source code files.
       - Make and config files were included as candidates if they contained >5
         lines of source
       - File already had some variant of a license header in it (even if <5
         lines).
      
      All documentation files were explicitly excluded.
      
      The following heuristics were used to determine which SPDX license
      identifiers to apply.
      
       - when both scanners couldn't find any license traces, file was
         considered to have no license information in it, and the top level
         COPYING file license applied.
      
         For non */uapi/* files that summary was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0                                              11139
      
         and resulted in the first patch in this series.
      
         If that file was a */uapi/* path one, it was "GPL-2.0 WITH
         Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|-------
         GPL-2.0 WITH Linux-syscall-note                        930
      
         and resulted in the second patch in this series.
      
       - if a file had some form of licensing information in it, and was one
         of the */uapi/* ones, it was denoted with the Linux-syscall-note if
         any GPL family license was found in the file or had no licensing in
         it (per prior point).  Results summary:
      
         SPDX license identifier                            # files
         ---------------------------------------------------|------
         GPL-2.0 WITH Linux-syscall-note                       270
         GPL-2.0+ WITH Linux-syscall-note                      169
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
         ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
         LGPL-2.1+ WITH Linux-syscall-note                      15
         GPL-1.0+ WITH Linux-syscall-note                       14
         ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
         LGPL-2.0+ WITH Linux-syscall-note                       4
         LGPL-2.1 WITH Linux-syscall-note                        3
         ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
         ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
      
         and that resulted in the third patch in this series.
      
       - when the two scanners agreed on the detected license(s), that became
         the concluded license(s).
      
       - when there was disagreement between the two scanners (one detected a
         license but the other didn't, or they both detected different
         licenses) a manual inspection of the file occurred.
      
       - In most cases a manual inspection of the information in the file
         resulted in a clear resolution of the license that should apply (and
         which scanner probably needed to revisit its heuristics).
      
       - When it was not immediately clear, the license identifier was
         confirmed with lawyers working with the Linux Foundation.
      
       - If there was any question as to the appropriate license identifier,
         the file was flagged for further research and to be revisited later
         in time.
      
      In total, over 70 hours of logged manual review was done on the
      spreadsheet to determine the SPDX license identifiers to apply to the
      source files by Kate, Philippe, Thomas and, in some cases, confirmation
      by lawyers working with the Linux Foundation.
      
      Kate also obtained a third independent scan of the 4.13 code base from
      FOSSology, and compared selected files where the other two scanners
      disagreed against that SPDX file, to see if there was new insights.  The
      Windriver scanner is based on an older version of FOSSology in part, so
      they are related.
      
      Thomas did random spot checks in about 500 files from the spreadsheets
      for the uapi headers and agreed with SPDX license identifier in the
      files he inspected. For the non-uapi files Thomas did random spot checks
      in about 15000 files.
      
      In initial set of patches against 4.14-rc6, 3 files were found to have
      copy/paste license identifier errors, and have been fixed to reflect the
      correct identifier.
      
      Additionally Philippe spent 10 hours this week doing a detailed manual
      inspection and review of the 12,461 patched files from the initial patch
      version early this week with:
       - a full scancode scan run, collecting the matched texts, detected
         license ids and scores
       - reviewing anything where there was a license detected (about 500+
         files) to ensure that the applied SPDX license was correct
       - reviewing anything where there was no detection but the patch license
         was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
         SPDX license was correct
      
      This produced a worksheet with 20 files needing minor correction.  This
      worksheet was then exported into 3 different .csv files for the
      different types of files to be modified.
      
      These .csv files were then reviewed by Greg.  Thomas wrote a script to
      parse the csv files and add the proper SPDX tag to the file, in the
      format that the file expected.  This script was further refined by Greg
      based on the output to detect more types of files automatically and to
      distinguish between header and source .c files (which need different
      comment types.)  Finally Greg ran the script using the .csv files to
      generate the patches.
      Reviewed-by: default avatarKate Stewart <kstewart@linuxfoundation.org>
      Reviewed-by: default avatarPhilippe Ombredanne <pombredanne@nexb.com>
      Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  2. 24 Aug, 2017 1 commit
    • Helge Deller's avatar
      parisc: Fix up devices below a PCI-PCI MegaRAID controller bridge · d81f7344
      Helge Deller authored
      A MegaRAID PCI card in my rp5470 acts as PCI-PCI bridge.
      Resource allocation for PCI devices behind such a bridge is quite incomplete,
      so that syslog reports those warnings:
      
       LBA 0:10: PCI host bridge to bus 0000:50
       pci_bus 0000:50: root bus resource [io  0x80000-0x8ffff] (bus address [0x0000-0xffff])
       pci_bus 0000:50: root bus resource [mem 0xffffffff94000000-0xffffffff95ffffff] (bus address [0x94000000-0x95ffffff])
       pci_bus 0000:50: root bus resource [bus 50-57]
       pci 0000:50:00.0: [8086:0964] type 01 class 0x060400
       pci 0000:50:00.1: [8086:1960] type 00 class 0x0e0001
       pci 0000:50:00.1: reg 0x10: [mem 0x00000000-0x003fffff pref]
       pci 0000:50:00.1: reg 0x30: [mem 0x00000000-0x00007fff pref]
       pci 0000:50:00.0: Changing bridge control from 0x00000000 to 0x00000023
       pci_bus 0000:51: busn_res: can not insert [bus 51-ff] under [bus 50-57] (conflicts with (null) [bus 50-57])
       pci 0000:50:00.0: PCI bridge to [bus 51-ff]
       pci 0000:50:00.0:   bridge window [io  0x80000-0x80fff]
       pci 0000:50:00.0:   bridge window [mem 0x00000000-0x000fffff]
       pci 0000:50:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
       pci 0000:50:00.0: can't claim BAR 14 [mem 0x00000000-0x000fffff]: no compatible bridge window
       pci 0000:50:00.0: can't claim BAR 15 [mem 0x00000000-0x000fffff pref]: no compatible bridge window
       pci 0000:50:00.0: can't claim BAR 16 [??? 0x00000000 flags 0x0]: no compatible bridge window
       pci_bus 0000:51: busn_res: [bus 51-ff] end is updated to 51
       pci 0000:50:00.0: BAR 16: [??? 0x00000000 flags 0x20000000] has bogus alignment
       pci 0000:50:00.1: BAR 0: assigned [mem 0xffffffff94000000-0xffffffff943fffff pref]
       pci 0000:50:00.0: BAR 14: assigned [mem 0xffffffff94400000-0xffffffff944fffff]
       pci 0000:50:00.0: BAR 15: assigned [mem 0xffffffff94500000-0xffffffff945fffff pref]
       pci 0000:50:00.1: BAR 6: assigned [mem 0xffffffff94600000-0xffffffff94607fff pref]
       pci 0000:50:00.0: PCI bridge to [bus 51]
       pci 0000:50:00.0:   bridge window [io  0x80000-0x80fff]
       pci 0000:50:00.0:   bridge window [mem 0xffffffff94400000-0xffffffff944fffff]
       pci 0000:50:00.0:   bridge window [mem 0xffffffff94500000-0xffffffff945fffff pref]
      
      The patch below tries to improve the resource allocation.
      Output is now:
      
       LBA 0:10: PCI host bridge to bus 0000:50
       pci_bus 0000:50: root bus resource [io  0x80000-0x8ffff] (bus address [0x0000-0xffff])
       pci_bus 0000:50: root bus resource [mem 0xffffffff94000000-0xffffffff95ffffff] (bus address [0x94000000-0x95ffffff])
       pci_bus 0000:50: root bus resource [bus 50-57]
       pci 0000:50:00.0: Changing bridge control from 0x00000000 to 0x00000023
       pci 0000:50:00.0: PCI bridge to [bus 51-ff]
       pci 0000:50:00.1: BAR 0: assigned [mem 0xffffffff94000000-0xffffffff943fffff pref]
       pci 0000:50:00.1: BAR 6: assigned [mem 0xffffffff94400000-0xffffffff94407fff pref]
       pci 0000:50:00.0: PCI bridge to [bus 51]
       pci 0000:50:00.0:   bridge window [io  0x80000-0x80fff]
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      d81f7344
  3. 22 Aug, 2017 1 commit
  4. 16 Aug, 2017 1 commit
  5. 31 Jul, 2017 1 commit
    • James Bottomley's avatar
      parisc: pdc_stable: Fix locking when creating sysfs links · 93964fd4
      James Bottomley authored
      There's no need to take the write lock when creating sysfs links.
      
      This patch fixes the following BUG:
       BUG: sleeping function called from invalid context at mm/slab.h:416
       in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
       CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc2-00110-g0b5477d9 #111
       Backtrace:
       [<0000000040217ac8>] show_stack+0x20/0x38
       [<00000000406fbbb0>] dump_stack+0xb0/0x128
       [<0000000040274090>] ___might_sleep+0x180/0x1b8
       [<0000000040274144>] __might_sleep+0x7c/0xe8
       [<0000000040373874>] kmem_cache_alloc+0x14c/0x1e0
       [<0000000040419514>] __kernfs_new_node+0x84/0x1b8
       [<000000004041b09c>] kernfs_new_node+0x3c/0x78
       [<000000004041e040>] kernfs_create_link+0x40/0xd8
       [<000000004041f320>] sysfs_do_create_link_sd.isra.0+0xb0/0x130
       [<000000004041f3d4>] sysfs_create_link+0x34/0x58
       [<000000004011b4a4>] pdc_stable_init+0x2c4/0x458
       [<0000000040200250>] do_one_initcall+0x70/0x1d8
       [<0000000040101644>] kernel_init_freeable+0x27c/0x390
       [<000000004020be44>] kernel_init+0x24/0x1c0
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      Reported-by: default avatarMeelis Roos <mroos@linux.ee>
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      93964fd4
  6. 23 Jul, 2017 1 commit
  7. 05 Jul, 2017 1 commit
  8. 03 Jul, 2017 1 commit
    • Thomas Bogendoerfer's avatar
      parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs · 33f9e024
      Thomas Bogendoerfer authored
      Enabling parport pc driver on a B2600 (and probably other 64bit PARISC
      systems) produced following BUG:
      
      CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e7 #156
      task: 000000009e050000 task.stack: 000000009e04c000
      
           YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
      PSW: 00001000000001101111111100001111 Not tainted
      r00-03  000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0
      r04-07  0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200
      r08-11  000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0
      r12-15  0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0
      r16-19  0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061
      r20-23  000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40
      r24-27  0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0
      r28-31  0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000
      sr00-03  0000000000000000 0000000000000000 0000000000000000 0000000000000000
      sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000
      
      IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4
       IIR: 03ffe01f    ISR: 0000000010340000  IOR: 000001781304cac8
       CPU:        0   CR30: 000000009e04c000 CR31: 00000000e2976de2
       ORIG_R28: 0000000000000200
       IAOQ[0]: sba_dma_supported+0x80/0xd0
       IAOQ[1]: sba_dma_supported+0x84/0xd0
       RP(r2): parport_pc_probe_port+0x178/0x1200
      
      Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port,
      which PARISC DMA API doesn't handle very nicely. This commit gives back
      DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA
      transaction.
      
      Cc: <stable@vger.kernel.org> # v3.13+
      Signed-off-by: default avatarThomas Bogendoerfer <tsbogend@alpha.franken.de>
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      33f9e024
  9. 02 Mar, 2017 1 commit
  10. 25 Feb, 2017 3 commits
  11. 24 Jan, 2017 1 commit
    • Bart Van Assche's avatar
      treewide: Constify most dma_map_ops structures · 5299709d
      Bart Van Assche authored
      Most dma_map_ops structures are never modified. Constify these
      structures such that these can be write-protected. This patch
      has been generated as follows:
      
      git grep -l 'struct dma_map_ops' |
        xargs -d\\n sed -i \
          -e 's/struct dma_map_ops/const struct dma_map_ops/g' \
          -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \
          -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \
          -e 's/const const struct dma_map_ops /const struct dma_map_ops /g';
      sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \
        $(git grep -l 'struct dma_map_ops intel_dma_ops');
      sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \
        $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc);
      sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \
             -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \
             -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \
          drivers/pci/host/*.c
      sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c
      sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c
      sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c
      Signed-off-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Juergen Gross <jgross@suse.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: linux-arch@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: x86@kernel.org
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      5299709d
  12. 24 Dec, 2016 1 commit
  13. 04 Aug, 2016 1 commit
    • Krzysztof Kozlowski's avatar
      dma-mapping: use unsigned long for dma_attrs · 00085f1e
      Krzysztof Kozlowski authored
      The dma-mapping core and the implementations do not change the DMA
      attributes passed by pointer.  Thus the pointer can point to const data.
      However the attributes do not have to be a bitfield.  Instead unsigned
      long will do fine:
      
      1. This is just simpler.  Both in terms of reading the code and setting
         attributes.  Instead of initializing local attributes on the stack
         and passing pointer to it to dma_set_attr(), just set the bits.
      
      2. It brings safeness and checking for const correctness because the
         attributes are passed by value.
      
      Semantic patches for this change (at least most of them):
      
          virtual patch
          virtual context
      
          @r@
          identifier f, attrs;
      
          @@
          f(...,
          - struct dma_attrs *attrs
          + unsigned long attrs
          , ...)
          {
          ...
          }
      
          @@
          identifier r.f;
          @@
          f(...,
          - NULL
          + 0
           )
      
      and
      
          // Options: --all-includes
          virtual patch
          virtual context
      
          @r@
          identifier f, attrs;
          type t;
      
          @@
          t f(..., struct dma_attrs *attrs);
      
          @@
          identifier r.f;
          @@
          f(...,
          - NULL
          + 0
           )
      
      Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.comSigned-off-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
      Acked-by: default avatarVineet Gupta <vgupta@synopsys.com>
      Acked-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Acked-by: default avatarHans-Christian Noren Egtvedt <egtvedt@samfundet.no>
      Acked-by: Mark Salter <msalter@redhat.com> [c6x]
      Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
      Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
      Reviewed-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
      Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
      Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
      Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
      Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
      Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
      Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
      Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
      Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
      Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
      Acked-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
      Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
      Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
      Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      00085f1e
  14. 08 Mar, 2016 1 commit
    • Bjorn Helgaas's avatar
      PCI: Include pci/hotplug Kconfig directly from pci/Kconfig · e7e127e3
      Bjorn Helgaas authored
      Include pci/hotplug/Kconfig directly from pci/Kconfig, so arches don't
      have to source both pci/Kconfig and pci/hotplug/Kconfig.
      
      Note that this effectively adds pci/hotplug/Kconfig to the following
      arches, because they already sourced drivers/pci/Kconfig but they
      previously did not source drivers/pci/hotplug/Kconfig:
      
        alpha
        arm
        avr32
        frv
        m68k
        microblaze
        mn10300
        sparc
        unicore32
      
      Inspired-by-patch-from: Bogicevic Sasa <brutallesale@gmail.com>
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      e7e127e3
  15. 30 Jan, 2016 1 commit
  16. 21 Jan, 2016 1 commit
  17. 12 Jan, 2016 1 commit
  18. 12 Dec, 2015 1 commit
    • Mikulas Patocka's avatar
      parisc iommu: fix panic due to trying to allocate too large region · e46e31a3
      Mikulas Patocka authored
      When using the Promise TX2+ SATA controller on PA-RISC, the system often
      crashes with kernel panic, for example just writing data with the dd
      utility will make it crash.
      
      Kernel panic - not syncing: drivers/parisc/sba_iommu.c: I/O MMU @ 000000000000a000 is out of mapping resources
      
      CPU: 0 PID: 18442 Comm: mkspadfs Not tainted 4.4.0-rc2 #2
      Backtrace:
       [<000000004021497c>] show_stack+0x14/0x20
       [<0000000040410bf0>] dump_stack+0x88/0x100
       [<000000004023978c>] panic+0x124/0x360
       [<0000000040452c18>] sba_alloc_range+0x698/0x6a0
       [<0000000040453150>] sba_map_sg+0x260/0x5b8
       [<000000000c18dbb4>] ata_qc_issue+0x264/0x4a8 [libata]
       [<000000000c19535c>] ata_scsi_translate+0xe4/0x220 [libata]
       [<000000000c19a93c>] ata_scsi_queuecmd+0xbc/0x320 [libata]
       [<0000000040499bbc>] scsi_dispatch_cmd+0xfc/0x130
       [<000000004049da34>] scsi_request_fn+0x6e4/0x970
       [<00000000403e95a8>] __blk_run_queue+0x40/0x60
       [<00000000403e9d8c>] blk_run_queue+0x3c/0x68
       [<000000004049a534>] scsi_run_queue+0x2a4/0x360
       [<000000004049be68>] scsi_end_request+0x1a8/0x238
       [<000000004049de84>] scsi_io_completion+0xfc/0x688
       [<0000000040493c74>] scsi_finish_command+0x17c/0x1d0
      
      The cause of the crash is not exhaustion of the IOMMU space, there is
      plenty of free pages. The function sba_alloc_range is called with size
      0x11000, thus the pages_needed variable is 0x11. The function
      sba_search_bitmap is called with bits_wanted 0x11 and boundary size is
      0x10 (because dma_get_seg_boundary(dev) returns 0xffff).
      
      The function sba_search_bitmap attempts to allocate 17 pages that must not
      cross 16-page boundary - it can't satisfy this requirement
      (iommu_is_span_boundary always returns true) and fails even if there are
      many free entries in the IOMMU space.
      
      How did it happen that we try to allocate 17 pages that don't cross
      16-page boundary? The cause is in the function iommu_coalesce_chunks. This
      function tries to coalesce adjacent entries in the scatterlist. The
      function does several checks if it may coalesce one entry with the next,
      one of those checks is this:
      
      	if (startsg->length + dma_len > max_seg_size)
      		break;
      
      When it finishes coalescing adjacent entries, it allocates the mapping:
      
      sg_dma_len(contig_sg) = dma_len;
      dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE);
      sg_dma_address(contig_sg) =
      	PIDE_FLAG
      	| (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT)
      	| dma_offset;
      
      It is possible that (startsg->length + dma_len > max_seg_size) is false
      (we are just near the 0x10000 max_seg_size boundary), so the funcion
      decides to coalesce this entry with the next entry. When the coalescing
      succeeds, the function performs
      	dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE);
      And now, because of non-zero dma_offset, dma_len is greater than 0x10000.
      iommu_alloc_range (a pointer to sba_alloc_range) is called and it attempts
      to allocate 17 pages for a device that must not cross 16-page boundary.
      
      To fix the bug, we must make sure that dma_len after addition of
      dma_offset and alignment doesn't cross the segment boundary. I.e. change
      	if (startsg->length + dma_len > max_seg_size)
      		break;
      to
      	if (ALIGN(dma_len + dma_offset + startsg->length, IOVP_SIZE) > max_seg_size)
      		break;
      
      This patch makes this change (it precalculates max_seg_boundary at the
      beginning of the function iommu_coalesce_chunks). I also added a check
      that the mapping length doesn't exceed dma_get_seg_boundary(dev) (it is
      not needed for Promise TX2+ SATA, but it may be needed for other devices
      that have dma_get_seg_boundary lower than dma_get_max_seg_size).
      Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      e46e31a3
  19. 11 Nov, 2015 1 commit
  20. 22 Oct, 2015 1 commit
  21. 15 Sep, 2015 1 commit
    • Bjorn Helgaas's avatar
      PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code" · 237865f1
      Bjorn Helgaas authored
      Revert dff22d20 ("PCI: Call pci_read_bridge_bases() from core instead
      of arch code").
      
      Reading PCI bridge windows is not arch-specific in itself, but there is PCI
      core code that doesn't work correctly if we read them too early.  For
      example, Hannes found this case on an ARM Freescale i.mx6 board:
      
        pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
        pci 0000:00:00.0: PCI bridge to [bus 01-ff]
        pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window)
        pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000]
        pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000]
        pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100]
      
      The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs
      0x204100 of space, and mem windows are megabyte-aligned.
      
      Bus sizing can increase a bridge window size, but never *decrease* it (see
      d65245c3 ("PCI: don't shrink bridge resources")).  Prior to
      dff22d20, ARM didn't read bridge windows at all, so the "original size"
      was zero, and we assigned a 3MB window.
      
      After dff22d20, we read the bridge windows before sizing the bus.  The
      firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since
      we never decrease the size, we kept 16MB even though we only needed 3MB.
      But 16MB doesn't fit in the host bridge aperture, so we failed to assign
      space for the window and the downstream devices.
      
      I think this is a defect in the PCI core: we shouldn't rely on the firmware
      to assign sensible windows.
      
      Ray reported a similar problem, also on ARM, with Broadcom iProc.
      
      Issues like this are too hard to fix right now, so revert dff22d20.
      Reported-by: default avatarHannes <oe5hpm@gmail.com>
      Reported-by: default avatarRay Jui <rjui@broadcom.com>
      Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com
      Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.comSigned-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Acked-by: default avatarYinghai Lu <yinghai@kernel.org>
      Acked-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      237865f1
  22. 10 Sep, 2015 1 commit
  23. 08 Sep, 2015 1 commit
    • Helge Deller's avatar
      PCI,parisc: Enable 64-bit bus addresses on PA-RISC · e02a653e
      Helge Deller authored
      Commit 3a9ad0b4 ("PCI: Add pci_bus_addr_t") unconditionally introduced usage of
      64-bit PCI bus addresses on all 64-bit platforms which broke PA-RISC.
      
      It turned out that due to enabling the 64-bit addresses, the PCI logic decided
      to use the GMMIO instead of the LMMIO region. This commit simply disables
      registering the GMMIO and thus we fall back to use the LMMIO region as before.
      
      Reverts commit 45ea2a5f
      ("PCI: Don't use 64-bit bus addresses on PA-RISC")
      
      To: linux-parisc@vger.kernel.org
      Cc: linux-pci@vger.kernel.org
      Cc: Bjorn Helgaas <bhelgaas@google.com>
      Cc: Meelis Roos <mroos@linux.ee>
      Cc: stable@vger.kernel.org  # v3.19+
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      e02a653e
  24. 31 Jul, 2015 1 commit
  25. 23 Jul, 2015 1 commit
    • Lorenzo Pieralisi's avatar
      PCI: Call pci_read_bridge_bases() from core instead of arch code · dff22d20
      Lorenzo Pieralisi authored
      When we scan a PCI bus, we read PCI-PCI bridge window registers with
      pci_read_bridge_bases() so we can validate the resource hierarchy.  Most
      architectures call pci_read_bridge_bases() from pcibios_fixup_bus(), but
      PCI-PCI bridges are not arch-specific, so this doesn't need to be in
      arch-specific code.
      
      Call pci_read_bridge_bases() directly from the PCI core instead of from
      arch code.
      
      For alpha and mips, we now call pci_read_bridge_bases() always; previously
      we only called it if PCI_PROBE_ONLY was set.
      
      [bhelgaas: changelog]
      Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      CC: Ralf Baechle <ralf@linux-mips.org>
      CC: James E.J. Bottomley <jejb@parisc-linux.org>
      CC: Michael Ellerman <mpe@ellerman.id.au>
      CC: Bjorn Helgaas <bhelgaas@google.com>
      CC: Richard Henderson <rth@twiddle.net>
      CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      CC: David Howells <dhowells@redhat.com>
      CC: Russell King <linux@arm.linux.org.uk>
      CC: Tony Luck <tony.luck@intel.com>
      CC: David S. Miller <davem@davemloft.net>
      CC: Ingo Molnar <mingo@redhat.com>
      CC: Guenter Roeck <linux@roeck-us.net>
      CC: Michal Simek <monstr@monstr.eu>
      CC: Chris Zankel <chris@zankel.net>
      dff22d20
  26. 24 Apr, 2015 1 commit
    • Scott Wood's avatar
      parisc: %pf is only for function pointers · a4e4f67f
      Scott Wood authored
      Use %ps for actual addresses, otherwise you'll get bad output
      on arches like parisc64 where %pf expects a function descriptor.
      
      This wasn't normally seen on parisc64 because the code is not built
      unless DEBUG_SUPERIO_INIT is manually defined.
      
      Patch modified by Helge Deller to utilize KERN_DEBUG.
      Signed-off-by: Scott Wood's avatarScott Wood <scottwood@freescale.com>
      Cc: linux-parisc@vger.kernel.org
      cc: James Bottomley <James.Bottomley@HansenPartnership.com>
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      a4e4f67f
  27. 21 Apr, 2015 1 commit
  28. 15 Apr, 2015 1 commit
  29. 06 Mar, 2015 1 commit
  30. 16 Jan, 2015 1 commit
  31. 01 Oct, 2014 1 commit
  32. 21 Sep, 2014 2 commits
  33. 19 Sep, 2014 1 commit
    • Kirill Tkhai's avatar
      sched, cleanup, treewide: Remove set_current_state(TASK_RUNNING) after schedule() · f139caf2
      Kirill Tkhai authored
      schedule(), io_schedule() and schedule_timeout() always return
      with TASK_RUNNING state set, so one more setting is unnecessary.
      
      (All places in patch are visible good, only exception is
       kiblnd_scheduler() from:
      
            drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
      
       Its schedule() is one line above standard 3 lines of unified diff)
      
      No places where set_current_state() is used for mb().
      Signed-off-by: default avatarKirill Tkhai <ktkhai@parallels.com>
      Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
      Link: http://lkml.kernel.org/r/1410529254.3569.23.camel@tkhai
      Cc: Alasdair Kergon <agk@redhat.com>
      Cc: Anil Belur <askb23@gmail.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Dave Kleikamp <shaggy@kernel.org>
      Cc: David Airlie <airlied@linux.ie>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Dmitry Eremin <dmitry.eremin@intel.com>
      Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Helge Deller <deller@gmx.de>
      Cc: Isaac Huang <he.huang@intel.com>
      Cc: James E.J. Bottomley <JBottomley@parallels.com>
      Cc: James E.J. Bottomley <jejb@parisc-linux.org>
      Cc: J. Bruce Fields <bfields@fieldses.org>
      Cc: Jeff Dike <jdike@addtoit.com>
      Cc: Jesper Nilsson <jesper.nilsson@axis.com>
      Cc: Jiri Slaby <jslaby@suse.cz>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Liang Zhen <liang.zhen@intel.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Masaru Nomura <massa.nomura@gmail.com>
      Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: Mike Snitzer <snitzer@redhat.com>
      Cc: Neil Brown <neilb@suse.de>
      Cc: Oleg Drokin <green@linuxhacker.ru>
      Cc: Peng Tao <bergwolf@gmail.com>
      Cc: Richard Weinberger <richard@nod.at>
      Cc: Robert Love <robert.w.love@intel.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Trond Myklebust <trond.myklebust@primarydata.com>
      Cc: Ursula Braun <ursula.braun@de.ibm.com>
      Cc: Zi Shen Lim <zlim.lnx@gmail.com>
      Cc: devel@driverdev.osuosl.org
      Cc: dm-devel@redhat.com
      Cc: dri-devel@lists.freedesktop.org
      Cc: fcoe-devel@open-fcoe.org
      Cc: jfs-discussion@lists.sourceforge.net
      Cc: linux390@de.ibm.com
      Cc: linux-afs@lists.infradead.org
      Cc: linux-cris-kernel@axis.com
      Cc: linux-kernel@vger.kernel.org
      Cc: linux-nfs@vger.kernel.org
      Cc: linux-parisc@vger.kernel.org
      Cc: linux-raid@vger.kernel.org
      Cc: linux-s390@vger.kernel.org
      Cc: linux-scsi@vger.kernel.org
      Cc: qla2xxx-upstream@qlogic.com
      Cc: user-mode-linux-devel@lists.sourceforge.net
      Cc: user-mode-linux-user@lists.sourceforge.net
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      f139caf2
  34. 27 Aug, 2014 1 commit
  35. 31 Jul, 2013 1 commit
    • Thomas Bogendoerfer's avatar
      parisc: Fix interrupt routing for C8000 serial ports · dd5e6d6a
      Thomas Bogendoerfer authored
      We can't use dev->mod_index for selecting the interrupt routing entry,
      because it's not an index into interrupt routing table. It will be even
      wrong on a machine with 2 CPUs (4 cores). But all needed information is
      contained in the PAT entries for the serial ports. mod[0] contains the
      iosapic address and mod_info has some indications for the interrupt
      input (at least it looks like it). This patch implements the searching
      for the right iosapic and uses this interrupt input information.
      Signed-off-by: default avatarThomas Bogendoerfer <tsbogend@alpha.franken.de>
      Cc: <stable@vger.kernel.org> # 3.10
      Signed-off-by: default avatarHelge Deller <deller@gmx.de>
      dd5e6d6a
  36. 25 Jul, 2013 1 commit
  37. 09 Jul, 2013 1 commit