Commit 06340235 authored by Ingo Molnar's avatar Ingo Molnar

Merge branch 'x86/core' into x86/kconfig

parents f9a36fa5 a98fe7f3
......@@ -18,11 +18,11 @@ For an architecture to support this feature, it must define some of
these macros in include/asm-XXX/topology.h:
#define topology_physical_package_id(cpu)
#define topology_core_id(cpu)
#define topology_thread_siblings(cpu)
#define topology_core_siblings(cpu)
#define topology_thread_cpumask(cpu)
#define topology_core_cpumask(cpu)
The type of **_id is int.
The type of siblings is cpumask_t.
The type of siblings is (const) struct cpumask *.
To be consistent on all architectures, include/linux/topology.h
provides default definitions for any of the above macros that are
......
......@@ -1310,8 +1310,13 @@ and is between 256 and 4096 characters. It is defined in the file
memtest= [KNL,X86] Enable memtest
Format: <integer>
range: 0,4 : pattern number
default : 0 <disable>
Specifies the number of memtest passes to be
performed. Each pass selects another test
pattern from a given set of patterns. Memtest
fills the memory with this pattern, validates
memory contents and reserves bad memory
regions that are detected.
meye.*= [HW] Set MotionEye Camera parameters
See Documentation/video4linux/meye.txt.
......
......@@ -158,7 +158,7 @@ Offset Proto Name Meaning
0202/4 2.00+ header Magic signature "HdrS"
0206/2 2.00+ version Boot protocol version supported
0208/4 2.00+ realmode_swtch Boot loader hook (see below)
020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete)
020C/2 2.00+ start_sys_seg The load-low segment (0x1000) (obsolete)
020E/2 2.00+ kernel_version Pointer to kernel version string
0210/1 2.00+ type_of_loader Boot loader identifier
0211/1 2.00+ loadflags Boot protocol option flags
......@@ -170,10 +170,11 @@ Offset Proto Name Meaning
0224/2 2.01+ heap_end_ptr Free memory after setup end
0226/2 N/A pad1 Unused
0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line
022C/4 2.03+ initrd_addr_max Highest legal initrd address
022C/4 2.03+ ramdisk_max Highest legal initrd address
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
0235/3 N/A pad2 Unused
0235/1 N/A pad2 Unused
0236/2 N/A pad3 Unused
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data
......@@ -299,14 +300,14 @@ Protocol: 2.00+
e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
10.17.
Field name: readmode_swtch
Field name: realmode_swtch
Type: modify (optional)
Offset/size: 0x208/4
Protocol: 2.00+
Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
Field name: start_sys
Field name: start_sys_seg
Type: read
Offset/size: 0x20c/2
Protocol: 2.00+
......@@ -468,7 +469,7 @@ Protocol: 2.02+
zero, the kernel will assume that your boot loader does not support
the 2.02+ protocol.
Field name: initrd_addr_max
Field name: ramdisk_max
Type: read
Offset/size: 0x22c/4
Protocol: 2.03+
......@@ -542,7 +543,10 @@ Protocol: 2.08+
The payload may be compressed. The format of both the compressed and
uncompressed data should be determined using the standard magic
numbers. Currently only gzip compressed ELF is used.
numbers. The currently supported compression formats are gzip
(magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA
(magic number 5D 00). The uncompressed payload is currently always ELF
(magic number 7F 45 4C 46).
Field name: payload_length
Type: read
......
Mini-HOWTO for using the earlyprintk=dbgp boot option with a
USB2 Debug port key and a debug cable, on x86 systems.
You need two computers, the 'USB debug key' special gadget and
and two USB cables, connected like this:
[host/target] <-------> [USB debug key] <-------> [client/console]
1. There are three specific hardware requirements:
a.) Host/target system needs to have USB debug port capability.
You can check this capability by looking at a 'Debug port' bit in
the lspci -vvv output:
# lspci -vvv
...
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T61
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [58] Debug port: BAR=1 offset=00a0
^^^^^^^^^^^ <==================== [ HERE ]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
...
( If your system does not list a debug port capability then you probably
wont be able to use the USB debug key. )
b.) You also need a Netchip USB debug cable/key:
http://www.plxtech.com/products/NET2000/NET20DC/default.asp
This is a small blue plastic connector with two USB connections,
it draws power from its USB connections.
c.) Thirdly, you need a second client/console system with a regular USB port.
2. Software requirements:
a.) On the host/target system:
You need to enable the following kernel config option:
CONFIG_EARLY_PRINTK_DBGP=y
And you need to add the boot command line: "earlyprintk=dbgp".
(If you are using Grub, append it to the 'kernel' line in
/etc/grub.conf)
NOTE: normally earlyprintk console gets turned off once the
regular console is alive - use "earlyprintk=dbgp,keep" to keep
this channel open beyond early bootup. This can be useful for
debugging crashes under Xorg, etc.
b.) On the client/console system:
You should enable the following kernel config option:
CONFIG_USB_SERIAL_DEBUG=y
On the next bootup with the modified kernel you should
get a /dev/ttyUSBx device(s).
Now this channel of kernel messages is ready to be used: start
your favorite terminal emulator (minicom, etc.) and set
it up to use /dev/ttyUSB0 - or use a raw 'cat /dev/ttyUSBx' to
see the raw output.
c.) On Nvidia Southbridge based systems: the kernel will try to probe
and find out which port has debug device connected.
3. Testing that it works fine:
You can test the output by using earlyprintk=dbgp,keep and provoking
kernel messages on the host/target system. You can provoke a harmless
kernel message by for example doing:
echo h > /proc/sysrq-trigger
On the host/target system you should see this help line in "dmesg" output:
SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
On the client/console system do:
cat /dev/ttyUSB0
And you should see the help line above displayed shortly after you've
provoked it on the host system.
If it does not work then please ask about it on the linux-kernel@vger.kernel.org
mailing list or contact the x86 maintainers.
......@@ -533,8 +533,9 @@ KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif
# Force gcc to behave correct even for buggy distributions
# Arch Makefiles may override this setting
ifndef CONFIG_CC_STACKPROTECTOR
KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
endif
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
......
#ifndef _ALPHA_STATFS_H
#define _ALPHA_STATFS_H
#include <linux/types.h>
/* Alpha is the only 64-bit platform with 32-bit statfs. And doesn't
even seem to implement statfs64 */
#define __statfs_word __u32
......
#ifndef _ALPHA_SWAB_H
#define _ALPHA_SWAB_H
#include <asm/types.h>
#include <linux/types.h>
#include <linux/compiler.h>
#include <asm/compiler.h>
......
......@@ -55,7 +55,7 @@ int irq_select_affinity(unsigned int irq)
cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
last_cpu = cpu;
irq_desc[irq].affinity = cpumask_of_cpu(cpu);
cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
irq_desc[irq].chip->set_affinity(irq, cpumask_of(cpu));
return 0;
}
......
......@@ -189,9 +189,21 @@ callback_init(void * kernel_end)
if (alpha_using_srm) {
static struct vm_struct console_remap_vm;
unsigned long vaddr = VMALLOC_START;
unsigned long nr_pages = 0;
unsigned long vaddr;
unsigned long i, j;
/* calculate needed size */
for (i = 0; i < crb->map_entries; ++i)
nr_pages += crb->map[i].count;
/* register the vm area */
console_remap_vm.flags = VM_ALLOC;
console_remap_vm.size = nr_pages << PAGE_SHIFT;
vm_area_register_early(&console_remap_vm, PAGE_SIZE);
vaddr = (unsigned long)console_remap_vm.addr;
/* Set up the third level PTEs and update the virtual
addresses of the CRB entries. */
for (i = 0; i < crb->map_entries; ++i) {
......@@ -213,12 +225,6 @@ callback_init(void * kernel_end)
vaddr += PAGE_SIZE;
}
}
/* Let vmalloc know that we've allocated some space. */
console_remap_vm.flags = VM_ALLOC;
console_remap_vm.addr = (void *) VMALLOC_START;
console_remap_vm.size = vaddr - VMALLOC_START;
vmlist = &console_remap_vm;
}
callback_init_done = 1;
......
......@@ -2,7 +2,7 @@
#define __ARM_A_OUT_H__
#include <linux/personality.h>
#include <asm/types.h>
#include <linux/types.h>
struct exec
{
......
......@@ -14,7 +14,7 @@
#ifndef __ASMARM_SETUP_H
#define __ASMARM_SETUP_H
#include <asm/types.h>
#include <linux/types.h>
#define COMMAND_LINE_SIZE 1024
......
......@@ -16,7 +16,7 @@
#define __ASM_ARM_SWAB_H
#include <linux/compiler.h>
#include <asm/types.h>
#include <linux/types.h>
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __SWAB_64_THRU_32__
......
......@@ -104,6 +104,11 @@ static struct irq_desc bad_irq_desc = {
.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
};
#ifdef CONFIG_CPUMASK_OFFSTACK
/* We are not allocating bad_irq_desc.affinity or .pending_mask */
#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
#endif
/*
* do_IRQ handles all hardware IRQ's. Decoded IRQs should not
* come via this function. Instead, they should provide their
......@@ -161,7 +166,7 @@ void __init init_IRQ(void)
irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
#ifdef CONFIG_SMP
bad_irq_desc.affinity = CPU_MASK_ALL;
cpumask_setall(bad_irq_desc.affinity);
bad_irq_desc.cpu = smp_processor_id();
#endif
init_arch_irq();
......@@ -191,15 +196,16 @@ void migrate_irqs(void)
struct irq_desc *desc = irq_desc + i;
if (desc->cpu == cpu) {
unsigned int newcpu = any_online_cpu(desc->affinity);
if (newcpu == NR_CPUS) {
unsigned int newcpu = cpumask_any_and(desc->affinity,
cpu_online_mask);
if (newcpu >= nr_cpu_ids) {
if (printk_ratelimit())
printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
i, cpu);
cpus_setall(desc->affinity);
newcpu = any_online_cpu(desc->affinity);
cpumask_setall(desc->affinity);
newcpu = cpumask_any_and(desc->affinity,
cpu_online_mask);
}
route_irq(desc, i, newcpu);
......
......@@ -65,6 +65,7 @@ SECTIONS
#endif
. = ALIGN(4096);
__per_cpu_start = .;
*(.data.percpu.page_aligned)
*(.data.percpu)
*(.data.percpu.shared_aligned)
__per_cpu_end = .;
......
......@@ -263,7 +263,7 @@ static void em_route_irq(int irq, unsigned int cpu)
const struct cpumask *mask = cpumask_of(cpu);
spin_lock_irq(&desc->lock);
desc->affinity = *mask;
cpumask_copy(desc->affinity, mask);
desc->chip->set_affinity(irq, mask);
spin_unlock_irq(&desc->lock);
}
......
......@@ -181,7 +181,7 @@ source "kernel/Kconfig.preempt"
config QUICKLIST
def_bool y
config HAVE_ARCH_BOOTMEM_NODE
config HAVE_ARCH_BOOTMEM
def_bool n
config ARCH_HAVE_MEMORY_PRESENT
......
......@@ -4,7 +4,7 @@
#ifndef __ASM_AVR32_SWAB_H
#define __ASM_AVR32_SWAB_H
#include <asm/types.h>
#include <linux/types.h>
#include <linux/compiler.h>
#define __SWAB_64_THRU_32__
......
......@@ -3,14 +3,4 @@
#include <asm-generic/percpu.h>
#ifdef CONFIG_MODULES
#define PERCPU_MODULE_RESERVE 8192
#else
#define PERCPU_MODULE_RESERVE 0
#endif
#define PERCPU_ENOUGH_ROOM \
(ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \
PERCPU_MODULE_RESERVE)
#endif /* __ARCH_BLACKFIN_PERCPU__ */
#ifndef _BLACKFIN_SWAB_H
#define _BLACKFIN_SWAB_H
#include <asm/types.h>
#include <linux/types.h>
#include <linux/compiler.h>
#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
......
......@@ -70,6 +70,11 @@ static struct irq_desc bad_irq_desc = {
#endif
};
#ifdef CONFIG_CPUMASK_OFFSTACK
/* We are not allocating a variable-sized bad_irq_desc.affinity */
#error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK."
#endif
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
......
#ifndef _H8300_SWAB_H
#define _H8300_SWAB_H
#include <asm/types.h>
#include <linux/types.h>
#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __SWAB_64_THRU_32__
......
......@@ -6,8 +6,6 @@
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#include <asm/types.h>
/* floating point status register: */
#define FPSR_TRAP_VD (1 << 0) /* invalid op trap disabled */
#define FPSR_TRAP_DD (1 << 1) /* denormal trap disabled */
......
......@@ -6,6 +6,7 @@
* Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
*/
#include <linux/types.h>
#include <linux/compiler.h>
/* define this macro to get some asm stmts included in 'c' files */
......
......@@ -10,6 +10,7 @@
#ifndef __ASSEMBLY__
#include <linux/types.h>