Commit 53f724b2 authored by Jiri Kosina's avatar Jiri Kosina

Merge branches 'for-4.10/upstream-fixes', 'for-4.11/intel-ish',...

Merge branches 'for-4.10/upstream-fixes', 'for-4.11/intel-ish', 'for-4.11/mayflash', 'for-4.11/microsoft', 'for-4.11/rmi', 'for-4.11/upstream' and 'for-4.11/wacom' into for-linus

Too many changes to show.

To preserve performance only 1000 of 1000+ files are displayed.

......@@ -137,6 +137,7 @@ Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Rudolf Marek <R.Marek@sh.cvut.cz>
Rui Saraiva <rmps@joel.ist.utl.pt>
Sachin P Sant <ssant@in.ibm.com>
Sarangdhar Joshi <spjoshi@codeaurora.org>
Sam Ravnborg <sam@mars.ravnborg.org>
Santosh Shilimkar <ssantosh@kernel.org>
Santosh Shilimkar <santosh.shilimkar@oracle.org>
......@@ -150,10 +151,13 @@ Shuah Khan <shuah@kernel.org> <shuah.kh@samsung.com>
Simon Kelley <simon@thekelleys.org.uk>
Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
Stephen Hemminger <shemminger@osdl.org>
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Subhash Jadavani <subhashj@codeaurora.org>
Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Sumit Semwal <sumit.semwal@ti.com>
Tejun Heo <htejun@gmail.com>
Thomas Graf <tgraf@suug.ch>
Thomas Pedersen <twp@codeaurora.org>
Tony Luck <tony.luck@intel.com>
Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
......
......@@ -3949,8 +3949,6 @@ E: gwingerde@gmail.com
D: Ralink rt2x00 WLAN driver
D: Minix V2 file-system
D: Misc fixes
S: Geessinkweg 177
S: 7544 TX Enschede
S: The Netherlands
N: Lars Wirzenius
......
......@@ -152,8 +152,6 @@ driver-model/
- directory with info about Linux driver model.
early-userspace/
- info about initramfs, klibc, and userspace early during boot.
edac.txt
- information on EDAC - Error Detection And Correction
efi-stub.txt
- How to use the EFI boot stub to bypass GRUB or elilo on EFI systems.
eisa.txt
......
......@@ -294,3 +294,10 @@ Description:
a firmware bug to the system vendor. Writing to this file
taints the kernel with TAINT_FIRMWARE_WORKAROUND, which
reduces the supportability of your system.
What: /sys/bus/pci/devices/.../revision
Date: November 2016
Contact: Emil Velikov <emil.l.velikov@gmail.com>
Description:
This file contains the revision field of the the PCI device.
The value comes from device config space. The file is read only.
What: Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
What: /sys/class/rtc/rtc0/device/rtc_calibration
Date: Oct 2011
KernelVersion: 3.0
Contact: Mark Godfrey <mark.godfrey@stericsson.com>
Description: The rtc_calibration attribute allows the userspace to
Description: Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
The rtc_calibration attribute allows the userspace to
calibrate the AB8500.s 32KHz Real Time Clock.
Every 60 seconds the AB8500 will correct the RTC's value
by adding to it the value of this attribute.
......
What: /sys/devices/.../deferred_probe
Date: August 2016
Contact: Ben Hutchings <ben.hutchings@codethink.co.uk>
Description:
The /sys/devices/.../deferred_probe attribute is
present for all devices. If a driver detects during
probing a device that a related device is not yet
ready, it may defer probing of the first device. The
kernel will retry probing the first device after any
other device is successfully probed. This attribute
reads as 1 if probing of this device is currently
deferred, or 0 otherwise.
......@@ -272,6 +272,22 @@ Description: Parameters for the CPU cache attributes
the modified cache line is written to main
memory only when it is replaced
What: /sys/devices/system/cpu/cpu*/cache/index*/id
Date: September 2016
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Cache id
The id provides a unique number for a specific instance of
a cache of a particular type. E.g. there may be a level
3 unified cache on each socket in a server and we may
assign them ids 0, 1, 2, ...
Note that id value can be non-contiguous. E.g. level 1
caches typically exist per core, but there may not be a
power of two cores on a socket, so these caches may be
numbered 0, 1, 2, 3, 4, 5, 8, 9, 10, ...
What: /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/turbo_stat
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/sub_turbo_stat
......
What: /sys/devices/platform/8086%x:00/firmware_version
Date: November 2016
KernelVersion: 4.10
Contact: "Sebastien Guiriec" <sebastien.guiriec@intel.com>
Description:
LPE Firmware version for SST driver on all atom
plaforms (BYT/CHT/Merrifield/BSW).
If the FW has never been loaded it will display:
"FW not yet loaded"
If FW has been loaded it will display:
"v01.aa.bb.cc"
aa: Major version is reflecting SoC version:
0d: BYT FW
0b: BSW FW
07: Merrifield FW
bb: Minor version
cc: Build version
process/changes.rst
\ No newline at end of file
......@@ -12,8 +12,8 @@ DOCBOOKS := z8530book.xml \
kernel-api.xml filesystems.xml lsm.xml kgdb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
80211.xml sh.xml regulator.xml w1.xml \
writing_musb_glue_layer.xml crypto-API.xml iio.xml
sh.xml regulator.xml w1.xml \
writing_musb_glue_layer.xml iio.xml
ifeq ($(DOCBOOKS),)
......
This diff is collapsed.
......@@ -111,6 +111,8 @@ ipmi_ssif - A driver for accessing BMCs on the SMBus. It uses the
I2C kernel driver's SMBus interfaces to send and receive IPMI messages
over the SMBus.
ipmi_powernv - A driver for access BMCs on POWERNV systems.
ipmi_watchdog - IPMI requires systems to have a very capable watchdog
timer. This driver implements the standard Linux watchdog timer
interface on top of the IPMI message handler.
......@@ -118,17 +120,15 @@ interface on top of the IPMI message handler.
ipmi_poweroff - Some systems support the ability to be turned off via
IPMI commands.
These are all individually selectable via configuration options.
bt-bmc - This is not part of the main driver, but instead a driver for
accessing a BMC-side interface of a BT interface. It is used on BMCs
running Linux to provide an interface to the host.
Note that the KCS-only interface has been removed. The af_ipmi driver
is no longer supported and has been removed because it was impossible
to do 32 bit emulation on 64-bit kernels with it.
These are all individually selectable via configuration options.
Much documentation for the interface is in the include files. The
IPMI include files are:
net/af_ipmi.h - Contains the socket interface.
linux/ipmi.h - Contains the user interface and IOCTL interface for IPMI.
linux/ipmi_smi.h - Contains the interface for system management interfaces
......@@ -245,6 +245,16 @@ addressed (because some boards actually have multiple BMCs on them)
and the user should not have to care what type of SMI is below them.
Watching For Interfaces
When your code comes up, the IPMI driver may or may not have detected
if IPMI devices exist. So you might have to defer your setup until
the device is detected, or you might be able to do it immediately.
To handle this, and to allow for discovery, you register an SMI
watcher with ipmi_smi_watcher_register() to iterate over interfaces
and tell you when they come and go.
Creating the User
To user the message handler, you must first create a user using
......@@ -263,7 +273,7 @@ closing the device automatically destroys the user.
Messaging
To send a message from kernel-land, the ipmi_request() call does
To send a message from kernel-land, the ipmi_request_settime() call does
pretty much all message handling. Most of the parameter are
self-explanatory. However, it takes a "msgid" parameter. This is NOT
the sequence number of messages. It is simply a long value that is
......@@ -352,11 +362,12 @@ that for more details.
The SI Driver
-------------
The SI driver allows up to 4 KCS or SMIC interfaces to be configured
in the system. By default, scan the ACPI tables for interfaces, and
if it doesn't find any the driver will attempt to register one KCS
interface at the spec-specified I/O port 0xca2 without interrupts.
You can change this at module load time (for a module) with:
The SI driver allows KCS, BT, and SMIC interfaces to be configured
in the system. It discovers interfaces through a host of different
methods, depending on the system.
You can specify up to four interfaces on the module load line and
control some module parameters:
modprobe ipmi_si.o type=<type1>,<type2>....
ports=<port1>,<port2>... addrs=<addr1>,<addr2>...
......@@ -367,7 +378,7 @@ You can change this at module load time (for a module) with:
force_kipmid=<enable1>,<enable2>,...
kipmid_max_busy_us=<ustime1>,<ustime2>,...
unload_when_empty=[0|1]
trydefaults=[0|1] trydmi=[0|1] tryacpi=[0|1]
trydmi=[0|1] tryacpi=[0|1]
tryplatform=[0|1] trypci=[0|1]