Commit 5a436cc0 authored by Adrian Hunter's avatar Adrian Hunter Committed by Ulf Hansson

mmc: sdhci: Optimize delay loops

The delay loops for reset and clock enable always take at least 1 ms
because they use mdelay(1). However they can take a lot less time e.g. less
than 50us. Use ktime and reduce the delay to 10 microseconds per loop.
Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Tested-by: default avatarLudovic Desroches <ludovic.desroches@microchip.com>
parent 660fc733
......@@ -14,6 +14,7 @@
*/
#include <linux/delay.h>
#include <linux/ktime.h>
#include <linux/highmem.h>
#include <linux/io.h>
#include <linux/module.h>
......@@ -165,7 +166,7 @@ static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
void sdhci_reset(struct sdhci_host *host, u8 mask)
{
unsigned long timeout;
ktime_t timeout;
sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
......@@ -177,18 +178,17 @@ void sdhci_reset(struct sdhci_host *host, u8 mask)
}
/* Wait max 100 ms */
timeout = 100;
timeout = ktime_add_ms(ktime_get(), 100);
/* hw clears the bit when it's done */
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
if (timeout == 0) {
if (ktime_after(ktime_get(), timeout)) {
pr_err("%s: Reset 0x%x never completed.\n",
mmc_hostname(host->mmc), (int)mask);
sdhci_dumpregs(host);
return;
}
timeout--;
mdelay(1);
udelay(10);
}
}
EXPORT_SYMBOL_GPL(sdhci_reset);
......@@ -1346,24 +1346,23 @@ EXPORT_SYMBOL_GPL(sdhci_calc_clk);
void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
{
unsigned long timeout;
ktime_t timeout;
clk |= SDHCI_CLOCK_INT_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
/* Wait max 20 ms */
timeout = 20;
timeout = ktime_add_ms(ktime_get(), 20);
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
if (ktime_after(ktime_get(), timeout)) {
pr_err("%s: Internal clock never stabilised.\n",
mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
}
timeout--;
spin_unlock_irq(&host->lock);
usleep_range(900, 1100);
udelay(10);
spin_lock_irq(&host->lock);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment