Commit 871c79fc authored by Jan Kiszka's avatar Jan Kiszka

Merge tag 'v4.14.123' into ipipe-x86-4.14.y

This is the 4.14.123 stable release
parents 720c63fa 8cb12398
......@@ -380,6 +380,7 @@ What: /sys/devices/system/cpu/vulnerabilities
/sys/devices/system/cpu/vulnerabilities/spectre_v2
/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
/sys/devices/system/cpu/vulnerabilities/l1tf
/sys/devices/system/cpu/vulnerabilities/mds
Date: January 2018
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Information about CPU vulnerabilities
......@@ -392,8 +393,7 @@ Description: Information about CPU vulnerabilities
"Vulnerable" CPU is affected and no mitigation in effect
"Mitigation: $M" CPU is affected and mitigation $M is in effect
Details about the l1tf file can be found in
Documentation/admin-guide/l1tf.rst
See also: Documentation/admin-guide/hw-vuln/index.rst
What: /sys/devices/system/cpu/smt
/sys/devices/system/cpu/smt/active
......
========================
Hardware vulnerabilities
========================
This section describes CPU vulnerabilities and provides an overview of the
possible mitigations along with guidance for selecting mitigations if they
are configurable at compile, boot or run time.
.. toctree::
:maxdepth: 1
l1tf
mds
......@@ -445,6 +445,7 @@ The default is 'cond'. If 'l1tf=full,force' is given on the kernel command
line, then 'always' is enforced and the kvm-intel.vmentry_l1d_flush
module parameter is ignored and writes to the sysfs file are rejected.
.. _mitigation_selection:
Mitigation selection guide
--------------------------
......@@ -556,7 +557,7 @@ When nested virtualization is in use, three operating systems are involved:
the bare metal hypervisor, the nested hypervisor and the nested virtual
machine. VMENTER operations from the nested hypervisor into the nested
guest will always be processed by the bare metal hypervisor. If KVM is the
bare metal hypervisor it wiil:
bare metal hypervisor it will:
- Flush the L1D cache on every switch from the nested hypervisor to the
nested virtual machine, so that the nested hypervisor's secrets are not
......
This diff is collapsed.
......@@ -17,14 +17,12 @@ etc.
kernel-parameters
devices
This section describes CPU vulnerabilities and provides an overview of the
possible mitigations along with guidance for selecting mitigations if they
are configurable at compile, boot or run time.
This section describes CPU vulnerabilities and their mitigations.
.. toctree::
:maxdepth: 1
l1tf
hw-vuln/index
Here is a set of documents aimed at users who are trying to track down
problems and bugs in particular.
......
......@@ -1971,7 +1971,7 @@
Default is 'flush'.
For details see: Documentation/admin-guide/l1tf.rst
For details see: Documentation/admin-guide/hw-vuln/l1tf.rst
l2cr= [PPC]
......@@ -2214,6 +2214,32 @@
Format: <first>,<last>
Specifies range of consoles to be captured by the MDA.
mds= [X86,INTEL]
Control mitigation for the Micro-architectural Data
Sampling (MDS) vulnerability.
Certain CPUs are vulnerable to an exploit against CPU
internal buffers which can forward information to a
disclosure gadget under certain conditions.
In vulnerable processors, the speculatively
forwarded data can be used in a cache side channel
attack, to access data to which the attacker does
not have direct access.
This parameter controls the MDS mitigation. The
options are:
full - Enable MDS mitigation on vulnerable CPUs
full,nosmt - Enable MDS mitigation and disable
SMT on vulnerable CPUs
off - Unconditionally disable MDS mitigation
Not specifying this option is equivalent to
mds=full.
For details see: Documentation/admin-guide/hw-vuln/mds.rst
mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory
Amount of memory to be used when the kernel is not able
to see the whole system memory or for test.
......@@ -2362,6 +2388,40 @@
in the "bleeding edge" mini2440 support kernel at
http://repo.or.cz/w/linux-2.6/mini2440.git
mitigations=
[X86,PPC,S390] Control optional mitigations for CPU
vulnerabilities. This is a set of curated,
arch-independent options, each of which is an
aggregation of existing arch-specific options.
off
Disable all optional CPU mitigations. This
improves system performance, but it may also
expose users to several CPU vulnerabilities.
Equivalent to: nopti [X86,PPC]
nospectre_v1 [PPC]
nobp=0 [S390]
nospectre_v2 [X86,PPC,S390]
spectre_v2_user=off [X86]
spec_store_bypass_disable=off [X86,PPC]
l1tf=off [X86]
mds=off [X86]
auto (default)
Mitigate all CPU vulnerabilities, but leave SMT
enabled, even if it's vulnerable. This is for
users who don't want to be surprised by SMT
getting disabled across kernel upgrades, or who
have other ways of avoiding SMT-based attacks.
Equivalent to: (default behavior)
auto,nosmt
Mitigate all CPU vulnerabilities, disabling SMT
if needed. This is for users who always want to
be fully mitigated, even if it means losing SMT.
Equivalent to: l1tf=flush,nosmt [X86]
mds=full,nosmt [X86]
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
parameter allows control of the logging verbosity for
......@@ -2680,7 +2740,11 @@
nosmt=force: Force disable SMT, cannot be undone
via the sysfs control file.
nospectre_v2 [X86] Disable all mitigations for the Spectre variant 2
nospectre_v1 [PPC] Disable mitigations for Spectre Variant 1 (bounds
check bypass). With this option data leaks are possible
in the system.
nospectre_v2 [X86,PPC_FSL_BOOK3E] Disable all mitigations for the Spectre variant 2
(indirect branch prediction) vulnerability. System may
allow data leaks with this option, which is equivalent
to spectre_v2=off.
......
......@@ -370,11 +370,15 @@ autosuspend the interface's device. When the usage counter is = 0
then the interface is considered to be idle, and the kernel may
autosuspend the device.
Drivers need not be concerned about balancing changes to the usage
counter; the USB core will undo any remaining "get"s when a driver
is unbound from its interface. As a corollary, drivers must not call
any of the ``usb_autopm_*`` functions after their ``disconnect``
routine has returned.
Drivers must be careful to balance their overall changes to the usage
counter. Unbalanced "get"s will remain in effect when a driver is
unbound from its interface, preventing the device from going into
runtime suspend should the interface be bound to a driver again. On
the other hand, drivers are allowed to achieve this balance by calling
the ``usb_autopm_*`` functions even after their ``disconnect`` routine
has returned -- say from within a work-queue routine -- provided they
retain an active reference to the interface (via ``usb_get_intf`` and
``usb_put_intf``).
Drivers using the async routines are responsible for their own
synchronization and mutual exclusion.
......
......@@ -86,6 +86,7 @@ implementation.
:maxdepth: 2
sh/index
x86/index
Korean translations
-------------------
......
......@@ -402,6 +402,7 @@ tcp_min_rtt_wlen - INTEGER
minimum RTT when it is moved to a longer path (e.g., due to traffic
engineering). A longer window makes the filter more resistant to RTT
inflations such as transient congestion. The unit is seconds.
Possible values: 0 - 86400 (1 day)
Default: 300
tcp_moderate_rcvbuf - BOOLEAN
......
# -*- coding: utf-8; mode: python -*-
project = "X86 architecture specific documentation"
tags.add("subproject")
latex_documents = [
('index', 'x86.tex', project,
'The kernel development community', 'manual'),
]
==========================
x86 architecture specifics
==========================
.. toctree::
:maxdepth: 1
mds
Microarchitectural Data Sampling (MDS) mitigation
=================================================
.. _mds:
Overview
--------
Microarchitectural Data Sampling (MDS) is a family of side channel attacks
on internal buffers in Intel CPUs. The variants are:
- Microarchitectural Store Buffer Data Sampling (MSBDS) (CVE-2018-12126)
- Microarchitectural Fill Buffer Data Sampling (MFBDS) (CVE-2018-12130)
- Microarchitectural Load Port Data Sampling (MLPDS) (CVE-2018-12127)
- Microarchitectural Data Sampling Uncacheable Memory (MDSUM) (CVE-2019-11091)
MSBDS leaks Store Buffer Entries which can be speculatively forwarded to a
dependent load (store-to-load forwarding) as an optimization. The forward
can also happen to a faulting or assisting load operation for a different
memory address, which can be exploited under certain conditions. Store
buffers are partitioned between Hyper-Threads so cross thread forwarding is
not possible. But if a thread enters or exits a sleep state the store
buffer is repartitioned which can expose data from one thread to the other.
MFBDS leaks Fill Buffer Entries. Fill buffers are used internally to manage
L1 miss situations and to hold data which is returned or sent in response
to a memory or I/O operation. Fill buffers can forward data to a load
operation and also write data to the cache. When the fill buffer is
deallocated it can retain the stale data of the preceding operations which
can then be forwarded to a faulting or assisting load operation, which can
be exploited under certain conditions. Fill buffers are shared between
Hyper-Threads so cross thread leakage is possible.
MLPDS leaks Load Port Data. Load ports are used to perform load operations