Commit 88a17252 authored by Tero Kristo's avatar Tero Kristo

clk: ti: add support for clkctrl clocks

Previously, hwmod core has been used for controlling the hwmod level
clocks directly. This has certain drawbacks, like being unable to share
the clocks for multiple users, missing usecounting and generally being
totally incompatible with the common clock framework.

This patch adds support for clkctrl clocks for addressing the above
issues. These support the modulemode handling, which will replace the
direct hwmod clkctrl linkage. Any optional clocks are also supported,
gate, mux and divider.
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
parent 35395a9c
......@@ -3,7 +3,8 @@ ifeq ($(CONFIG_ARCH_OMAP2PLUS), y)
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
clkt_dpll.o clkt_iclk.o clkt_dflt.o
clkt_dpll.o clkt_iclk.o clkt_dflt.o \
clkctrl.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o dpll3xxx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-814x.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
......
This diff is collapsed.
......@@ -203,6 +203,35 @@ struct ti_dt_clk {
.node_name = name, \
}
/* CLKCTRL type definitions */
struct omap_clkctrl_div_data {
const int *dividers;
int max_div;
};
struct omap_clkctrl_bit_data {
u8 bit;
u8 type;
const char * const *parents;
const void *data;
};
struct omap_clkctrl_reg_data {
u16 offset;
const struct omap_clkctrl_bit_data *bit_data;
u16 flags;
const char *parent;
};
struct omap_clkctrl_data {
u32 addr;
const struct omap_clkctrl_reg_data *regs;
};
#define CLKF_SW_SUP BIT(0)
#define CLKF_HW_SUP BIT(1)
#define CLKF_NO_IDLEST BIT(2)
typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
struct clk *ti_clk_register_gate(struct ti_clk *setup);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment