Commit d2bbc75a authored by Sergej Benilov's avatar Sergej Benilov Committed by Greg Kroah-Hartman

sis900: fix TX completion

[ Upstream commit 8ac8a01092b2added0749ef937037bf1912e13e3 ]

Since commit 605ad7f1 "tcp: refine TSO autosizing",
outbound throughput is dramatically reduced for some connections, as sis900
is doing TX completion within idle states only.

Make TX completion happen after every transmitted packet.

Test:
netperf

before patch:
> netperf -H remote -l -2000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380 327680 327680    253.44      0.06

after patch:
> netperf -H remote -l -10000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380 327680 327680    5.38       14.89

Thx to Dave Miller and Eric Dumazet for helpful hints
Signed-off-by: default avatarSergej Benilov <sergej.benilov@googlemail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
parent 297ab0a0
......@@ -1057,7 +1057,7 @@ sis900_open(struct net_device *net_dev)
sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
sw32(cr, RxENA | sr32(cr));
sw32(ier, IE);
......@@ -1580,7 +1580,7 @@ static void sis900_tx_timeout(struct net_device *net_dev)
sw32(txdp, sis_priv->tx_ring_dma);
/* Enable all known interrupts by setting the interrupt mask. */
sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
}
/**
......@@ -1620,7 +1620,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
spin_unlock_irqrestore(&sis_priv->lock, flags);
return NETDEV_TX_OK;
}
sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len);
sis_priv->tx_ring[entry].cmdsts = (OWN | INTR | skb->len);
sw32(cr, TxENA | sr32(cr));
sis_priv->cur_tx ++;
......@@ -1676,7 +1676,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
do {
status = sr32(isr);
if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0)
if ((status & (HIBERR|TxURN|TxERR|TxIDLE|TxDESC|RxORN|RxERR|RxOK)) == 0)
/* nothing intresting happened */
break;
handled = 1;
......@@ -1686,7 +1686,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
/* Rx interrupt */
sis900_rx(net_dev);
if (status & (TxURN | TxERR | TxIDLE))
if (status & (TxURN | TxERR | TxIDLE | TxDESC))
/* Tx interrupt */
sis900_finish_xmit(net_dev);
......@@ -1898,8 +1898,8 @@ static void sis900_finish_xmit (struct net_device *net_dev)
if (tx_status & OWN) {
/* The packet is not transmitted yet (owned by hardware) !
* Note: the interrupt is generated only when Tx Machine
* is idle, so this is an almost impossible case */
* Note: this is an almost impossible condition
* in case of TxDESC ('descriptor interrupt') */
break;
}
......@@ -2475,7 +2475,7 @@ static int sis900_resume(struct pci_dev *pci_dev)
sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC);
sw32(cr, RxENA | sr32(cr));
sw32(ier, IE);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment