da850-evm.dts 5.21 KB
Newer Older
1 2 3 4 5 6 7 8 9 10
/*
 * Device Tree for DA850 EVM board
 *
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation, version 2.
 */
/dts-v1/;
11
#include "da850.dtsi"
12 13 14 15 16 17

/ {
	compatible = "ti,da850-evm", "ti,da850";
	model = "DA850/AM1808/OMAP-L138 EVM";

	soc {
18 19
		pmx_core: pinmux@1c14120 {
			status = "okay";
20 21 22 23 24 25 26 27 28 29 30 31

			mcasp0_pins: pinmux_mcasp0_pins {
				pinctrl-single,bits = <
					/*
					 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
					 * AFSR, AMUTE
					 */
					0x00 0x11111111 0xffffffff
					/* AXR11, AXR12 */
					0x04 0x00011000 0x000ff000
				>;
			};
32
		};
33 34 35 36 37 38 39 40 41
		serial0: serial@1c42000 {
			status = "okay";
		};
		serial1: serial@1d0c000 {
			status = "okay";
		};
		serial2: serial@1d0d000 {
			status = "okay";
		};
42 43 44
		rtc0: rtc@1c23000 {
			status = "okay";
		};
45 46 47 48 49
		i2c0: i2c@1c22000 {
			status = "okay";
			clock-frequency = <100000>;
			pinctrl-names = "default";
			pinctrl-0 = <&i2c0_pins>;
50 51 52 53

			tps: tps@48 {
				reg = <0x48>;
			};
54
			tlv320aic3106: tlv320aic3106@18 {
55
				#sound-dai-cells = <0>;
56 57 58 59 60 61 62 63 64 65 66 67
				compatible = "ti,tlv320aic3106";
				reg = <0x18>;
				status = "okay";

				/* Regulators */
				IOVDD-supply = <&vdcdc2_reg>;
				/* Derived from VBAT: Baseboard 3.3V / 1.8V */
				AVDD-supply = <&vbat>;
				DRVDD-supply = <&vbat>;
				DVDD-supply = <&vbat>;
			};

68
		};
69 70 71
		wdt: wdt@1c21000 {
			status = "okay";
		};
72 73 74 75 76 77 78
		mmc0: mmc@1c40000 {
			max-frequency = <50000000>;
			bus-width = <4>;
			status = "okay";
			pinctrl-names = "default";
			pinctrl-0 = <&mmc0_pins>;
		};
79 80 81 82 83 84 85 86 87
		spi1: spi@1f0e000 {
			status = "okay";
			pinctrl-names = "default";
			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
			flash: m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "m25p64";
				spi-max-frequency = <30000000>;
88
				m25p,fast-read;
89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119
				reg = <0>;
				partition@0 {
					label = "U-Boot-SPL";
					reg = <0x00000000 0x00010000>;
					read-only;
				};
				partition@1 {
					label = "U-Boot";
					reg = <0x00010000 0x00080000>;
					read-only;
				};
				partition@2 {
					label = "U-Boot-Env";
					reg = <0x00090000 0x00010000>;
					read-only;
				};
				partition@3 {
					label = "Kernel";
					reg = <0x000a0000 0x00280000>;
				};
				partition@4 {
					label = "Filesystem";
					reg = <0x00320000 0x00400000>;
				};
				partition@5 {
					label = "MAC-Address";
					reg = <0x007f0000 0x00010000>;
					read-only;
				};
			};
		};
120 121 122 123 124 125
		mdio: mdio@1e24000 {
			status = "okay";
			pinctrl-names = "default";
			pinctrl-0 = <&mdio_pins>;
			bus_freq = <2200000>;
		};
126 127 128 129 130
		eth0: ethernet@1e20000 {
			status = "okay";
			pinctrl-names = "default";
			pinctrl-0 = <&mii_pins>;
		};
131 132 133
		gpio: gpio@1e26000 {
			status = "okay";
		};
134
	};
135 136 137 138 139
	nand_cs3@62000000 {
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <&nand_cs3_pins>;
	};
140 141 142 143 144 145 146
	vbat: fixedregulator@0 {
		compatible = "regulator-fixed";
		regulator-name = "vbat";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-boot-on;
	};
147 148 149

	sound {
		compatible = "simple-audio-card";
150
		simple-audio-card,name = "DA850-OMAPL138 EVM";
151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173
		simple-audio-card,widgets =
			"Line", "Line In",
			"Line", "Line Out";
		simple-audio-card,routing =
			"LINE1L", "Line In",
			"LINE1R", "Line In",
			"Line Out", "LLOUT",
			"Line Out", "RLOUT";
		simple-audio-card,format = "dsp_b";
		simple-audio-card,bitclock-master = <&link0_codec>;
		simple-audio-card,frame-master = <&link0_codec>;
		simple-audio-card,bitclock-inversion;

		simple-audio-card,cpu {
			sound-dai = <&mcasp0>;
			system-clock-frequency = <24576000>;
		};

		link0_codec: simple-audio-card,codec {
			sound-dai = <&tlv320aic3106>;
			system-clock-frequency = <24576000>;
		};
	};
174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225
};

/include/ "tps6507x.dtsi"

&tps {
	vdcdc1_2-supply = <&vbat>;
	vdcdc3-supply = <&vbat>;
	vldo1_2-supply = <&vbat>;

	regulators {
		vdcdc1_reg: regulator@0 {
			regulator-name = "VDCDC1_3.3V";
			regulator-min-microvolt = <3150000>;
			regulator-max-microvolt = <3450000>;
			regulator-always-on;
			regulator-boot-on;
		};

		vdcdc2_reg: regulator@1 {
			regulator-name = "VDCDC2_3.3V";
			regulator-min-microvolt = <1710000>;
			regulator-max-microvolt = <3450000>;
			regulator-always-on;
			regulator-boot-on;
			ti,defdcdc_default = <1>;
		};

		vdcdc3_reg: regulator@2 {
			regulator-name = "VDCDC3_1.2V";
			regulator-min-microvolt = <950000>;
			regulator-max-microvolt = <1350000>;
			regulator-always-on;
			regulator-boot-on;
			ti,defdcdc_default = <1>;
		};

		ldo1_reg: regulator@3 {
			regulator-name = "LDO1_1.8V";
			regulator-min-microvolt = <1710000>;
			regulator-max-microvolt = <1890000>;
			regulator-always-on;
			regulator-boot-on;
		};

		ldo2_reg: regulator@4 {
			regulator-name = "LDO2_1.2V";
			regulator-min-microvolt = <1140000>;
			regulator-max-microvolt = <1320000>;
			regulator-always-on;
			regulator-boot-on;
		};
	};
226
};
227 228

&mcasp0 {
229
	#sound-dai-cells = <0>;
230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mcasp0_pins>;

	op-mode = <0>;          /* MCASP_IIS_MODE */
	tdm-slots = <2>;
	/* 4 serializer */
	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
		0 0 0 0
		0 0 0 0
		0 0 0 1
		2 0 0 0
	>;
	tx-num-evt = <32>;
	rx-num-evt = <32>;
};