Commit 1d8d3dec authored by Johannes Berg's avatar Johannes Berg Committed by John W. Linville

mac80211: handle SMPS action frames

When a peer changes SMPS state we should update
rate control so it doesn't have to detect it by
itself. It can't detect "dynamic" mode anyway
since that just requires rts-cts handshaking.
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 645d3590
......@@ -3502,9 +3502,12 @@ void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn);
*
* @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have
* changed, rate control algorithm can update its internal state if needed.
* @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed, the rate
* control algorithm needs to adjust accordingly.
*/
enum rate_control_changed {
IEEE80211_RC_HT_CHANGED = BIT(0)
IEEE80211_RC_HT_CHANGED = BIT(0),
IEEE80211_RC_SMPS_CHANGED = BIT(1),
};
/**
......
......@@ -28,6 +28,7 @@
#include "wpa.h"
#include "tkip.h"
#include "wme.h"
#include "rate.h"
/*
* monitor mode reception
......@@ -2233,6 +2234,63 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
return RX_DROP_UNUSABLE;
switch (mgmt->u.action.category) {
case WLAN_CATEGORY_HT:
/* reject HT action frames from stations not supporting HT */
if (!rx->sta->sta.ht_cap.ht_supported)
goto invalid;
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_AP &&
sdata->vif.type != NL80211_IFTYPE_ADHOC)
break;
/* verify action & smps_control are present */
if (len < IEEE80211_MIN_ACTION_SIZE + 2)
goto invalid;
switch (mgmt->u.action.u.ht_smps.action) {
case WLAN_HT_ACTION_SMPS: {
struct ieee80211_supported_band *sband;
u8 smps;
/* convert to HT capability */
switch (mgmt->u.action.u.ht_smps.smps_control) {
case WLAN_HT_SMPS_CONTROL_DISABLED:
smps = WLAN_HT_CAP_SM_PS_DISABLED;
break;
case WLAN_HT_SMPS_CONTROL_STATIC:
smps = WLAN_HT_CAP_SM_PS_STATIC;
break;
case WLAN_HT_SMPS_CONTROL_DYNAMIC:
smps = WLAN_HT_CAP_SM_PS_DYNAMIC;
break;
default:
goto invalid;
}
smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
/* if no change do nothing */
if ((rx->sta->sta.ht_cap.cap &
IEEE80211_HT_CAP_SM_PS) == smps)
goto handled;
rx->sta->sta.ht_cap.cap &= ~IEEE80211_HT_CAP_SM_PS;
rx->sta->sta.ht_cap.cap |= smps;
sband = rx->local->hw.wiphy->bands[status->band];
rate_control_rate_update(local, sband, rx->sta,
IEEE80211_RC_SMPS_CHANGED,
local->_oper_channel_type);
goto handled;
}
default:
goto invalid;
}
break;
case WLAN_CATEGORY_BACK:
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment