Commit 70c33eaa authored by Ashok Nagarajan's avatar Ashok Nagarajan Committed by John W. Linville

{nl,cfg,mac}80211: Allow user to see/configure HT protection mode

This patch introduces a new mesh configuration parameter "ht_opmode" and will
allow user to check the current HT protection mode selected. Users could
configure the protection mode by the command "iw mesh_iface set mesh_param
mesh_ht_protection_mode=2". The default protection mode of mesh is set to
non-HT mixed mode.
Signed-off-by: default avatarAshok Nagarajan <ashok@cozybit.com>
Reviewed-by: default avatarThomas Pedersen <thomas@cozybit.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent b91e64aa
......@@ -2154,6 +2154,8 @@ enum nl80211_mntr_flags {
* @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
* to synchronize to for 11s default synchronization method (see 11C.12.2.2)
*
* @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
*
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
enum nl80211_meshconf_params {
......@@ -2179,6 +2181,7 @@ enum nl80211_meshconf_params {
NL80211_MESHCONF_FORWARDING,
NL80211_MESHCONF_RSSI_THRESHOLD,
NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
NL80211_MESHCONF_HT_OPMODE,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
......
......@@ -821,6 +821,7 @@ struct mesh_config {
bool dot11MeshGateAnnouncementProtocol;
bool dot11MeshForwarding;
s32 rssi_threshold;
u16 ht_opmode;
};
/**
......
......@@ -1538,6 +1538,11 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
return -ENOTSUPP;
conf->rssi_threshold = nconf->rssi_threshold;
}
if (_chg_mesh_attr(NL80211_MESHCONF_HT_OPMODE, mask)) {
conf->ht_opmode = nconf->ht_opmode;
sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode;
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
}
return 0;
}
......
......@@ -595,12 +595,15 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
ieee80211_mesh_root_setup(ifmsh);
ieee80211_queue_work(&local->hw, &sdata->work);
sdata->vif.bss_conf.ht_operation_mode =
ifmsh->mshcfg.ht_opmode;
sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
sdata->vif.bss_conf.basic_rates =
ieee80211_mandatory_rates(sdata->local,
sdata->local->hw.conf.channel->band);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
BSS_CHANGED_BEACON_ENABLED |
BSS_CHANGED_HT |
BSS_CHANGED_BASIC_RATES |
BSS_CHANGED_BEACON_INT);
}
......
......@@ -157,6 +157,7 @@ out:
if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
sdata->u.mesh.mshcfg.ht_opmode = ht_opmode;
changed = BSS_CHANGED_HT;
mpl_dbg("mesh_plink %pM: protection mode changed to %d",
sdata->vif.addr, ht_opmode);
......
......@@ -61,6 +61,7 @@ const struct mesh_config default_mesh_config = {
.dot11MeshGateAnnouncementProtocol = false,
.dot11MeshForwarding = true,
.rssi_threshold = MESH_RSSI_THRESHOLD,
.ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
};
const struct mesh_setup default_mesh_setup = {
......
......@@ -3390,7 +3390,9 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
nla_put_u8(msg, NL80211_MESHCONF_FORWARDING,
cur_params.dot11MeshForwarding) ||
nla_put_u32(msg, NL80211_MESHCONF_RSSI_THRESHOLD,
cur_params.rssi_threshold))
cur_params.rssi_threshold) ||
nla_put_u32(msg, NL80211_MESHCONF_HT_OPMODE,
cur_params.ht_opmode))
goto nla_put_failure;
nla_nest_end(msg, pinfoattr);
genlmsg_end(msg, hdr);
......@@ -3426,6 +3428,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
[NL80211_MESHCONF_GATE_ANNOUNCEMENTS] = { .type = NLA_U8 },
[NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 },
[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32},
[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16},
};
static const struct nla_policy
......@@ -3523,6 +3526,8 @@ do {\
mask, NL80211_MESHCONF_FORWARDING, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold,
mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode,
mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16);
if (mask_out)
*mask_out = mask;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment