Commit 9c1db1a1 authored by Eric Miao's avatar Eric Miao Committed by Russell King

[ARM] pxa: add pxa3xx NAND support for littleton

Signed-off-by: default avatarEric Miao <eric.miao@marvell.com>
Cc: Sergey Podstavin <spodstavin@ru.mvista.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 481b5526
......@@ -38,6 +38,7 @@
#include <asm/arch/pxafb.h>
#include <asm/arch/ssp.h>
#include <asm/arch/pxa27x_keypad.h>
#include <asm/arch/pxa3xx_nand.h>
#include <asm/arch/littleton.h>
#include "generic.h"
......@@ -361,6 +362,57 @@ static void __init littleton_init_keypad(void)
static inline void littleton_init_keypad(void) {}
#endif
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
static struct mtd_partition littleton_nand_partitions[] = {
[0] = {
.name = "Bootloader",
.offset = 0,
.size = 0x060000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
[1] = {
.name = "Kernel",
.offset = 0x060000,
.size = 0x200000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
[2] = {
.name = "Filesystem",
.offset = 0x0260000,
.size = 0x3000000, /* 48M - rootfs */
},
[3] = {
.name = "MassStorage",
.offset = 0x3260000,
.size = 0x3d40000,
},
[4] = {
.name = "BBT",
.offset = 0x6FA0000,
.size = 0x80000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* NOTE: we reserve some blocks at the end of the NAND flash for
* bad block management, and the max number of relocation blocks
* differs on different platforms. Please take care with it when
* defining the partition table.
*/
};
static struct pxa3xx_nand_platform_data littleton_nand_info = {
.enable_arbiter = 1,
.parts = littleton_nand_partitions,
.nr_parts = ARRAY_SIZE(littleton_nand_partitions),
};
static void __init littleton_init_nand(void)
{
pxa3xx_set_nand_info(&littleton_nand_info);
}
#else
static inline void littleton_init_nand(void) {}
#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
static void __init littleton_init(void)
{
/* initialize MFP configurations */
......@@ -374,6 +426,7 @@ static void __init littleton_init(void)
littleton_init_lcd();
littleton_init_keypad();
littleton_init_nand();
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment