Commit 173ca26e authored by Alexei Starovoitov's avatar Alexei Starovoitov Committed by David S. Miller

samples/bpf: add comprehensive ipip, ipip6, ip6ip6 test

the test creates 3 namespaces with veth connected via bridge.
First two namespaces simulate two different hosts with the same
IPv4 and IPv6 addresses configured on the tunnel interface and they
communicate with outside world via standard tunnels.
Third namespace creates collect_md tunnel that is driven by BPF
program which selects different remote host (either first or
second namespace) based on tcp dest port number while tcp dst
ip is the same.
This scenario is rough approximation of load balancer use case.
The tests check both traditional tunnel configuration and collect_md mode.
Signed-off-by: 's avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: 's avatarDavid S. Miller <davem@davemloft.net>
parent a1c82704
......@@ -9,12 +9,15 @@
#include <uapi/linux/if_ether.h>
#include <uapi/linux/if_packet.h>
#include <uapi/linux/ip.h>
#include <uapi/linux/ipv6.h>
#include <uapi/linux/in.h>
#include <uapi/linux/tcp.h>
#include <uapi/linux/filter.h>
#include <uapi/linux/pkt_cls.h>
#include <net/ipv6.h>
#include "bpf_helpers.h"
#define _htonl __builtin_bswap32
#define ERROR(ret) do {\
char fmt[] = "ERROR line:%d ret:%d\n";\
bpf_trace_printk(fmt, sizeof(fmt), __LINE__, ret); \
......@@ -246,4 +249,133 @@ int _ipip_get_tunnel(struct __sk_buff *skb)
return TC_ACT_OK;
}
SEC("ipip6_set_tunnel")
int _ipip6_set_tunnel(struct __sk_buff *skb)
{
struct bpf_tunnel_key key = {};
void *data = (void *)(long)skb->data;
struct iphdr *iph = data;
struct tcphdr *tcp = data + sizeof(*iph);
void *data_end = (void *)(long)skb->data_end;
int ret;
/* single length check */
if (data + sizeof(*iph) + sizeof(*tcp) > data_end) {
ERROR(1);
return TC_ACT_SHOT;
}
key.remote_ipv6[0] = _htonl(0x2401db00);
key.tunnel_ttl = 64;
if (iph->protocol == IPPROTO_ICMP) {
key.remote_ipv6[3] = _htonl(1);
} else {
if (iph->protocol != IPPROTO_TCP || iph->ihl != 5) {
ERROR(iph->protocol);
return TC_ACT_SHOT;
}
if (tcp->dest == htons(5200)) {
key.remote_ipv6[3] = _htonl(1);
} else if (tcp->dest == htons(5201)) {
key.remote_ipv6[3] = _htonl(2);
} else {
ERROR(tcp->dest);
return TC_ACT_SHOT;
}
}
ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), BPF_F_TUNINFO_IPV6);
if (ret < 0) {
ERROR(ret);
return TC_ACT_SHOT;
}
return TC_ACT_OK;
}
SEC("ipip6_get_tunnel")
int _ipip6_get_tunnel(struct __sk_buff *skb)
{
int ret;
struct bpf_tunnel_key key;
char fmt[] = "remote ip6 %x::%x\n";
ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), BPF_F_TUNINFO_IPV6);
if (ret < 0) {
ERROR(ret);
return TC_ACT_SHOT;
}
bpf_trace_printk(fmt, sizeof(fmt), _htonl(key.remote_ipv6[0]),
_htonl(key.remote_ipv6[3]));
return TC_ACT_OK;
}
SEC("ip6ip6_set_tunnel")
int _ip6ip6_set_tunnel(struct __sk_buff *skb)
{
struct bpf_tunnel_key key = {};
void *data = (void *)(long)skb->data;
struct ipv6hdr *iph = data;
struct tcphdr *tcp = data + sizeof(*iph);
void *data_end = (void *)(long)skb->data_end;
int ret;
/* single length check */
if (data + sizeof(*iph) + sizeof(*tcp) > data_end) {
ERROR(1);
return TC_ACT_SHOT;
}
key.remote_ipv6[0] = _htonl(0x2401db00);
key.tunnel_ttl = 64;
if (iph->nexthdr == NEXTHDR_ICMP) {
key.remote_ipv6[3] = _htonl(1);
} else {
if (iph->nexthdr != NEXTHDR_TCP) {
ERROR(iph->nexthdr);
return TC_ACT_SHOT;
}
if (tcp->dest == htons(5200)) {
key.remote_ipv6[3] = _htonl(1);
} else if (tcp->dest == htons(5201)) {
key.remote_ipv6[3] = _htonl(2);
} else {
ERROR(tcp->dest);
return TC_ACT_SHOT;
}
}
ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), BPF_F_TUNINFO_IPV6);
if (ret < 0) {
ERROR(ret);
return TC_ACT_SHOT;
}
return TC_ACT_OK;
}
SEC("ip6ip6_get_tunnel")
int _ip6ip6_get_tunnel(struct __sk_buff *skb)
{
int ret;
struct bpf_tunnel_key key;
char fmt[] = "remote ip6 %x::%x\n";
ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), BPF_F_TUNINFO_IPV6);
if (ret < 0) {
ERROR(ret);
return TC_ACT_SHOT;
}
bpf_trace_printk(fmt, sizeof(fmt), _htonl(key.remote_ipv6[0]),
_htonl(key.remote_ipv6[3]));
return TC_ACT_OK;
}
char _license[] SEC("license") = "GPL";
#!/bin/bash
function config_device {
ip netns add at_ns0
ip netns add at_ns1
ip netns add at_ns2
ip link add veth0 type veth peer name veth0b
ip link add veth1 type veth peer name veth1b
ip link add veth2 type veth peer name veth2b
ip link set veth0b up
ip link set veth1b up
ip link set veth2b up
ip link set dev veth0b mtu 1500
ip link set dev veth1b mtu 1500
ip link set dev veth2b mtu 1500
ip link set veth0 netns at_ns0
ip link set veth1 netns at_ns1
ip link set veth2 netns at_ns2
ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
ip netns exec at_ns0 ip addr add 2401:db00::1/64 dev veth0 nodad
ip netns exec at_ns0 ip link set dev veth0 up
ip netns exec at_ns1 ip addr add 172.16.1.101/24 dev veth1
ip netns exec at_ns1 ip addr add 2401:db00::2/64 dev veth1 nodad
ip netns exec at_ns1 ip link set dev veth1 up
ip netns exec at_ns2 ip addr add 172.16.1.200/24 dev veth2
ip netns exec at_ns2 ip addr add 2401:db00::3/64 dev veth2 nodad
ip netns exec at_ns2 ip link set dev veth2 up
ip link add br0 type bridge
ip link set br0 up
ip link set dev br0 mtu 1500
ip link set veth0b master br0
ip link set veth1b master br0
ip link set veth2b master br0
}
function add_ipip_tunnel {
ip netns exec at_ns0 \
ip link add dev $DEV_NS type ipip local 172.16.1.100 remote 172.16.1.200
ip netns exec at_ns0 ip link set dev $DEV_NS up
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns1 \
ip link add dev $DEV_NS type ipip local 172.16.1.101 remote 172.16.1.200
ip netns exec at_ns1 ip link set dev $DEV_NS up
# same inner IP address in at_ns0 and at_ns1
ip netns exec at_ns1 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns2 ip link add dev $DEV type ipip external
ip netns exec at_ns2 ip link set dev $DEV up
ip netns exec at_ns2 ip addr add dev $DEV 10.1.1.200/24
}
function add_ipip6_tunnel {
ip netns exec at_ns0 \
ip link add dev $DEV_NS type ip6tnl mode ipip6 local 2401:db00::1/64 remote 2401:db00::3/64
ip netns exec at_ns0 ip link set dev $DEV_NS up
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns1 \
ip link add dev $DEV_NS type ip6tnl mode ipip6 local 2401:db00::2/64 remote 2401:db00::3/64
ip netns exec at_ns1 ip link set dev $DEV_NS up
# same inner IP address in at_ns0 and at_ns1
ip netns exec at_ns1 ip addr add dev $DEV_NS 10.1.1.100/24
ip netns exec at_ns2 ip link add dev $DEV type ip6tnl mode ipip6 external
ip netns exec at_ns2 ip link set dev $DEV up
ip netns exec at_ns2 ip addr add dev $DEV 10.1.1.200/24
}
function add_ip6ip6_tunnel {
ip netns exec at_ns0 \
ip link add dev $DEV_NS type ip6tnl mode ip6ip6 local 2401:db00::1/64 remote 2401:db00::3/64
ip netns exec at_ns0 ip link set dev $DEV_NS up
ip netns exec at_ns0 ip addr add dev $DEV_NS 2601:646::1/64
ip netns exec at_ns1 \
ip link add dev $DEV_NS type ip6tnl mode ip6ip6 local 2401:db00::2/64 remote 2401:db00::3/64
ip netns exec at_ns1 ip link set dev $DEV_NS up
# same inner IP address in at_ns0 and at_ns1
ip netns exec at_ns1 ip addr add dev $DEV_NS 2601:646::1/64
ip netns exec at_ns2 ip link add dev $DEV type ip6tnl mode ip6ip6 external
ip netns exec at_ns2 ip link set dev $DEV up
ip netns exec at_ns2 ip addr add dev $DEV 2601:646::2/64
}
function attach_bpf {
DEV=$1
SET_TUNNEL=$2
GET_TUNNEL=$3
ip netns exec at_ns2 tc qdisc add dev $DEV clsact
ip netns exec at_ns2 tc filter add dev $DEV egress bpf da obj tcbpf2_kern.o sec $SET_TUNNEL
ip netns exec at_ns2 tc filter add dev $DEV ingress bpf da obj tcbpf2_kern.o sec $GET_TUNNEL
}
function test_ipip {
DEV_NS=ipip_std
DEV=ipip_bpf
config_device
# tcpdump -nei br0 &
cat /sys/kernel/debug/tracing/trace_pipe &
add_ipip_tunnel
attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel
ip netns exec at_ns0 ping -c 1 10.1.1.200
ip netns exec at_ns2 ping -c 1 10.1.1.100
ip netns exec at_ns0 iperf -sD -p 5200 > /dev/null
ip netns exec at_ns1 iperf -sD -p 5201 > /dev/null
sleep 0.2
# tcp check _same_ IP over different tunnels
ip netns exec at_ns2 iperf -c 10.1.1.100 -n 5k -p 5200
ip netns exec at_ns2 iperf -c 10.1.1.100 -n 5k -p 5201
cleanup
}
# IPv4 over IPv6 tunnel
function test_ipip6 {
DEV_NS=ipip_std
DEV=ipip_bpf
config_device
# tcpdump -nei br0 &
cat /sys/kernel/debug/tracing/trace_pipe &
add_ipip6_tunnel
attach_bpf $DEV ipip6_set_tunnel ipip6_get_tunnel
ip netns exec at_ns0 ping -c 1 10.1.1.200
ip netns exec at_ns2 ping -c 1 10.1.1.100
ip netns exec at_ns0 iperf -sD -p 5200 > /dev/null
ip netns exec at_ns1 iperf -sD -p 5201 > /dev/null
sleep 0.2
# tcp check _same_ IP over different tunnels
ip netns exec at_ns2 iperf -c 10.1.1.100 -n 5k -p 5200
ip netns exec at_ns2 iperf -c 10.1.1.100 -n 5k -p 5201
cleanup
}
# IPv6 over IPv6 tunnel
function test_ip6ip6 {
DEV_NS=ipip_std
DEV=ipip_bpf
config_device
# tcpdump -nei br0 &
cat /sys/kernel/debug/tracing/trace_pipe &
add_ip6ip6_tunnel
attach_bpf $DEV ip6ip6_set_tunnel ip6ip6_get_tunnel
ip netns exec at_ns0 ping -6 -c 1 2601:646::2
ip netns exec at_ns2 ping -6 -c 1 2601:646::1
ip netns exec at_ns0 iperf -6sD -p 5200 > /dev/null
ip netns exec at_ns1 iperf -6sD -p 5201 > /dev/null
sleep 0.2
# tcp check _same_ IP over different tunnels
ip netns exec at_ns2 iperf -6c 2601:646::1 -n 5k -p 5200
ip netns exec at_ns2 iperf -6c 2601:646::1 -n 5k -p 5201
cleanup
}
function cleanup {
set +ex
pkill iperf
ip netns delete at_ns0
ip netns delete at_ns1
ip netns delete at_ns2
ip link del veth0
ip link del veth1
ip link del veth2
ip link del br0
pkill tcpdump
pkill cat
set -ex
}
cleanup
echo "Testing IP tunnels..."
test_ipip
test_ipip6
test_ip6ip6
echo "*** PASS ***"
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment