Commit 2a48d732 authored by Bjorn Andersson's avatar Bjorn Andersson

rpmsg: rpmsg_send() operations takes rpmsg_endpoint

The rpmsg_send() operations has been taking a rpmsg_device, but this
forces users of secondary rpmsg_endpoints to use the rpmsg_sendto()
interface - by extracting source and destination from the given data
structures. If we instead pass the rpmsg_endpoint to these functions a
service can use rpmsg_sendto() to respond to messages, even on secondary
endpoints.

In addition this would allow us to support operations on multiple
channels in future backends that does not support off-channel
operations.
Signed-off-by: 's avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 4dffed5b
......@@ -379,10 +379,10 @@ static int rpmsg_dev_probe(struct device *dev)
struct rpmsg_ns_msg nsm;
strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
nsm.addr = rpdev->src;
nsm.addr = rpdev->ept->addr;
nsm.flags = RPMSG_NS_CREATE;
err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
if (err)
dev_err(dev, "failed to announce service %d\n", err);
}
......@@ -407,7 +407,7 @@ static int rpmsg_dev_remove(struct device *dev)
nsm.addr = rpdev->src;
nsm.flags = RPMSG_NS_DESTROY;
err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
if (err)
dev_err(dev, "failed to announce service %d\n", err);
}
......
......@@ -193,13 +193,14 @@ rpmsg_send_offchannel_raw(struct rpmsg_channel *, u32, u32, void *, int, bool);
/**
* rpmsg_send() - send a message across to the remote processor
* @rpdev: the rpmsg channel
* @ept: the rpmsg endpoint
* @data: payload of message
* @len: length of payload
*
* This function sends @data of length @len on the @rpdev channel.
* The message will be sent to the remote processor which the @rpdev
* channel belongs to, using @rpdev's source and destination addresses.
* This function sends @data of length @len on the @ept endpoint.
* The message will be sent to the remote processor which the @ept
* endpoint belongs to, using @ept's address and its associated rpmsg
* device destination addresses.
* In case there are no TX buffers available, the function will block until
* one becomes available, or a timeout of 15 seconds elapses. When the latter
* happens, -ERESTARTSYS is returned.
......@@ -208,23 +209,24 @@ rpmsg_send_offchannel_raw(struct rpmsg_channel *, u32, u32, void *, int, bool);
*
* Returns 0 on success and an appropriate error value on failure.
*/
static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len)
static inline int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len)
{
u32 src = rpdev->src, dst = rpdev->dst;
struct rpmsg_channel *rpdev = ept->rpdev;
u32 src = ept->addr, dst = rpdev->dst;
return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
}
/**
* rpmsg_sendto() - send a message across to the remote processor, specify dst
* @rpdev: the rpmsg channel
* @ept: the rpmsg endpoint
* @data: payload of message
* @len: length of payload
* @dst: destination address
*
* This function sends @data of length @len to the remote @dst address.
* The message will be sent to the remote processor which the @rpdev
* channel belongs to, using @rpdev's source address.
* The message will be sent to the remote processor which the @ept
* endpoint belongs to, using @ept's address as source.
* In case there are no TX buffers available, the function will block until
* one becomes available, or a timeout of 15 seconds elapses. When the latter
* happens, -ERESTARTSYS is returned.
......@@ -234,16 +236,17 @@ static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len)
* Returns 0 on success and an appropriate error value on failure.
*/
static inline
int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
int rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
{
u32 src = rpdev->src;
struct rpmsg_channel *rpdev = ept->rpdev;
u32 src = ept->addr;
return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
}
/**
* rpmsg_send_offchannel() - send a message using explicit src/dst addresses
* @rpdev: the rpmsg channel
* @ept: the rpmsg endpoint
* @src: source address
* @dst: destination address
* @data: payload of message
......@@ -251,8 +254,8 @@ int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
*
* This function sends @data of length @len to the remote @dst address,
* and uses @src as the source address.
* The message will be sent to the remote processor which the @rpdev
* channel belongs to.
* The message will be sent to the remote processor which the @ept
* endpoint belongs to.
* In case there are no TX buffers available, the function will block until
* one becomes available, or a timeout of 15 seconds elapses. When the latter
* happens, -ERESTARTSYS is returned.
......@@ -262,21 +265,24 @@ int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
* Returns 0 on success and an appropriate error value on failure.
*/
static inline
int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
int rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
void *data, int len)
{
struct rpmsg_channel *rpdev = ept->rpdev;
return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
}
/**
* rpmsg_send() - send a message across to the remote processor
* @rpdev: the rpmsg channel
* @ept: the rpmsg endpoint
* @data: payload of message
* @len: length of payload
*
* This function sends @data of length @len on the @rpdev channel.
* The message will be sent to the remote processor which the @rpdev
* channel belongs to, using @rpdev's source and destination addresses.
* This function sends @data of length @len on the @ept endpoint.
* The message will be sent to the remote processor which the @ept
* endpoint belongs to, using @ept's address as source and its associated
* rpdev's address as destination.
* In case there are no TX buffers available, the function will immediately
* return -ENOMEM without waiting until one becomes available.
*
......@@ -285,23 +291,24 @@ int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
* Returns 0 on success and an appropriate error value on failure.
*/
static inline
int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len)
int rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len)
{
u32 src = rpdev->src, dst = rpdev->dst;
struct rpmsg_channel *rpdev = ept->rpdev;
u32 src = ept->addr, dst = rpdev->dst;
return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
}
/**
* rpmsg_sendto() - send a message across to the remote processor, specify dst
* @rpdev: the rpmsg channel
* @ept: the rpmsg endpoint
* @data: payload of message
* @len: length of payload
* @dst: destination address
*
* This function sends @data of length @len to the remote @dst address.
* The message will be sent to the remote processor which the @rpdev
* channel belongs to, using @rpdev's source address.
* The message will be sent to the remote processor which the @ept
* endpoint belongs to, using @ept's address as source.
* In case there are no TX buffers available, the function will immediately
* return -ENOMEM without waiting until one becomes available.
*
......@@ -310,16 +317,17 @@ int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len)
* Returns 0 on success and an appropriate error value on failure.
*/
static inline
int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
int rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
{
u32 src = rpdev->src;
struct rpmsg_channel *rpdev = ept->rpdev;
u32 src = ept->addr;
return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
}
/**
* rpmsg_send_offchannel() - send a message using explicit src/dst addresses
* @rpdev: the rpmsg channel
* @ept: the rpmsg endpoint
* @src: source address
* @dst: destination address
* @data: payload of message
......@@ -327,8 +335,8 @@ int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
*
* This function sends @data of length @len to the remote @dst address,
* and uses @src as the source address.
* The message will be sent to the remote processor which the @rpdev
* channel belongs to.
* The message will be sent to the remote processor which the @ept
* endpoint belongs to.
* In case there are no TX buffers available, the function will immediately
* return -ENOMEM without waiting until one becomes available.
*
......@@ -337,9 +345,11 @@ int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
* Returns 0 on success and an appropriate error value on failure.
*/
static inline
int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
void *data, int len)
{
struct rpmsg_channel *rpdev = ept->rpdev;
return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
}
......
......@@ -47,7 +47,7 @@ static void rpmsg_sample_cb(struct rpmsg_channel *rpdev, void *data, int len,
}
/* send a new message now */
ret = rpmsg_send(rpdev, MSG, strlen(MSG));
ret = rpmsg_send(rpdev->ept, MSG, strlen(MSG));
if (ret)
dev_err(&rpdev->dev, "rpmsg_send failed: %d\n", ret);
}
......@@ -67,7 +67,7 @@ static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
dev_set_drvdata(&rpdev->dev, idata);
/* send a message to our remote processor */
ret = rpmsg_send(rpdev, MSG, strlen(MSG));
ret = rpmsg_send(rpdev->ept, MSG, strlen(MSG));
if (ret) {
dev_err(&rpdev->dev, "rpmsg_send failed: %d\n", ret);
return ret;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment