1. 15 Jan, 2016 1 commit
  2. 23 Jun, 2014 1 commit
    • Tariq Saeed's avatar
      ocfs2: fix deadlock when two nodes are converting same lock from PR to EX and... · 27bf6305
      Tariq Saeed authored
      ocfs2: fix deadlock when two nodes are converting same lock from PR to EX and idletimeout closes conn
      Orabug: 18639535
      Two node cluster and both nodes hold a lock at PR level and both want to
      convert to EX at the same time.  Master node 1 has sent BAST and then
      closes the connection due to idletime out.  Node 0 receives BAST, sends
      unlock req with cancel flag but gets error -ENOTCONN.  The problem is
      this error is ignored in dlm_send_remote_unlock_request() on the
      **incorrect** assumption that the master is dead.  See NOTE in comment
      why it returns DLM_NORMAL.  Upon getting DLM_NORMAL, node 0 proceeds to
      sends convert (without cancel flg) which fails with -ENOTCONN.  waits 5
      sec and resends.
      This time gets DLM_IVLOCKID from the master since lock not found in
      grant, it had been moved to converting queue in response to conv PR->EX
      req.  No way out.
      Node 1 (master)				Node 0
      ==============				======
        lock mode PR				PR
        convert PR -> EX
        mv grant -> convert and que BAST
                           <-------- convert PR -> EX
        convert que looks like this: ((node 1, PR -> EX) (node 0, PR -> EX))
                              BAST (want PR -> NL)
        idle timout, conn closed
                                      In response to BAST,
                                      sends unlock with cancel convert flag
                                      gets -ENOTCONN. Ignores and
                                      sends remote convert request
                                      gets -ENOTCONN, waits 5 Sec, retries
                         <----------------- convert req goes through on next try
        does not find lock on grant que
                         status DLM_IVLOCKID
      No way out.  Fix is to keep retrying unlock with cancel flag until it
      succeeds or the master dies.
      Signed-off-by: default avatarTariq Saeed <tariq.x.saeed@oracle.com>
      Reviewed-by: default avatarMark Fasheh <mfasheh@suse.de>
      Cc: Joel Becker <jlbec@evilplan.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
  3. 11 Sep, 2013 1 commit
  4. 21 Feb, 2011 1 commit
    • Tao Ma's avatar
      ocfs2: Remove ENTRY from masklog. · ef6b689b
      Tao Ma authored
      ENTRY is used to record the entry of a function.
      But because it is added in so many functions, if we enable it,
      the system logs get filled up quickly and cause too much I/O.
      So actually no one can open it for a production system or even
      for a test.
      So for mlog_entry_void, we just remove it.
      for mlog_entry(...), we replace it with mlog(0,...), and they
      will be replace by trace event later.
      Signed-off-by: default avatarTao Ma <boyu.mt@taobao.com>
  5. 06 May, 2010 1 commit
  6. 30 Mar, 2010 1 commit
    • Tejun Heo's avatar
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      Tejun Heo authored
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
      percpu.h is included by sched.h and module.h and thus ends up being
      included when building most .c files.  percpu.h includes slab.h which
      in turn includes gfp.h making everything defined by the two files
      universally available and complicating inclusion dependencies.
      percpu.h -> slab.h dependency is about to be removed.  Prepare for
      this change by updating users of gfp and slab facilities include those
      headers directly instead of assuming availability.  As this conversion
      needs to touch large number of source files, the following script is
      used as the basis of conversion.
      The script does the followings.
      * Scan files for gfp and slab usages and update includes such that
        only the necessary includes are there.  ie. if only gfp is used,
        gfp.h, if slab is used, slab.h.
      * When the script inserts a new include, it looks at the include
        blocks and try to put the new include such that its order conforms
        to its surrounding.  It's put in the include block which contains
        core kernel includes, in the same order that the rest are ordered -
        alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
        doesn't seem to be any matching order.
      * If the script can't find a place to put a new include (mostly
        because the file doesn't have fitting include block), it prints out
        an error message indicating which .h file needs to be added to the
      The conversion was done in the following steps.
      1. The initial automatic conversion of all .c files updated slightly
         over 4000 files, deleting around 700 includes and adding ~480 gfp.h
         and ~3000 slab.h inclusions.  The script emitted errors for ~400
      2. Each error was manually checked.  Some didn't need the inclusion,
         some needed manual addition while adding it to implementation .h or
         embedding .c file was more appropriate for others.  This step added
         inclusions to around 150 files.
      3. The script was run again and the output was compared to the edits
         from #2 to make sure no file was left behind.
      4. Several build tests were done and a couple of problems were fixed.
         e.g. lib/decompress_*.c used malloc/free() wrappers around slab
         APIs requiring slab.h to be added manually.
      5. The script was run on all .h files but without automatically
         editing them as sprinkling gfp.h and slab.h inclusions around .h
         files could easily lead to inclusion dependency hell.  Most gfp.h
         inclusion directives were ignored as stuff from gfp.h was usually
         wildly available and often used in preprocessor macros.  Each
         slab.h inclusion directive was examined and added manually as
      6. percpu.h was updated not to include slab.h.
      7. Build test were done on the following configurations and failures
         were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
         distributed build env didn't work with gcov compiles) and a few
         more options had to be turned off depending on archs to make things
         build (like ipr on powerpc/64 which failed due to missing writeq).
         * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
         * powerpc and powerpc64 SMP allmodconfig
         * sparc and sparc64 SMP allmodconfig
         * ia64 SMP allmodconfig
         * s390 SMP allmodconfig
         * alpha SMP allmodconfig
         * um on x86_64 SMP allmodconfig
      8. percpu.h modifications were reverted so that it could be applied as
         a separate patch and serve as bisection point.
      Given the fact that I had only a couple of failures from tests on step
      6, I'm fairly confident about the coverage of this conversion patch.
      If there is a breakage, it's likely to be something in one of the arch
      headers which should be easily discoverable easily on most builds of
      the specific arch.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Guess-its-ok-by: default avatarChristoph Lameter <cl@linux-foundation.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
  7. 26 Jan, 2010 1 commit
  8. 24 Sep, 2009 1 commit
  9. 21 Aug, 2009 1 commit
  10. 26 Feb, 2009 1 commit
  11. 07 Feb, 2007 3 commits
  12. 07 Aug, 2006 3 commits
  13. 26 Jun, 2006 3 commits
  14. 24 Mar, 2006 1 commit
  15. 03 Feb, 2006 1 commit
    • Kurt Hackel's avatar
      [PATCH] ocfs2/dlm: fixes · e2faea4c
      Kurt Hackel authored
      * fix a hang which can occur during shutdown migration
      * do not allow nodes to join during recovery
      * when restarting lock mastery, do not ignore nodes which come up
      * more than one node could become recovery master, fix this
      * sleep to allow some time for heartbeat state to catch up to network
      * extra debug info for bad recovery state problems
      * make DLM_RECO_NODE_DATA_DONE a valid state for non-master recovery nodes
      * prune all locks from dead nodes on $RECOVERY lock resources
      * do NOT automatically add new nodes to mle nodemaps until they have properly
        joined the domain
      * make sure dlm_pick_recovery_master only exits when all nodes have synced
      * properly handle dlmunlock errors in dlm_pick_recovery_master
      * do not propagate network errors in dlm_send_begin_reco_message
      * dead nodes were not being put in the recovery map sometimes, fix this
      * dlmunlock was failing to clear the unlock actions on DLM_DENIED
      Signed-off-by: default avatarKurt Hackel <kurt.hackel@oracle.com>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
  16. 03 Jan, 2006 1 commit