Dealing with x86 SMI troubles
System Management Interrupts or SMIs are special interrupts at the highest priority causing the x86 CPU to enter the System Management Mode, a variant of the flat real mode for executing some handler implemented by the BIOS. SMIs don’t go through the interrupt controller, they are detected by the CPU logic in between instructions and unconditionally dispatched from there. This introduces critical issues for real-time systems:
SMIs may preempt the real-time code for an undefined amount of time, at any time, and cannot be masked or preempted by kernel software. Actually, the kernel software does not even know about ongoing SMI requests.
Transitioning to/from the SMM context requires the CPU to save/restore most of its register file, switching to a different CPU mode. With multi-core systems, the BIOS may even wait for all CPU cores to enter SMM before serializing the execution of the pending SMI request. This is yet another source of unexpected delay.
SMM handlers invoked by SMIs are implemented in the BIOS, therefore their implementation is opaque to us. We may just observe the pathological latency spots some of them cause (e.g. seeing 300 microsecond delays with USB-related SMI is common).
|This means that regardless of using a single or dual kernel configuration, SMIs will bite the same way. Very unfortunately, SMIs are commonly involved in health monitoring operations such as thermal control in x86 chipsets, or regular device management such as USB support, so there is no simple and straightforward option for dealing with them.|
Almost all x86 desktop and server class hardware badly relies on SMIs nowadays, for all sort of internal management operations and so-called optimizations.
You will be generally luckier with SoC platforms specifically aimed at supporting embedded applications, which frequently involve real-time constraints. You should definitely ask your vendor about the SMI issue upfront, and/or test the hardware by yourself before buying.
By default, the SMI workaround code present in the Xenomai core attempts to detect potential issues with SMI/SMM, by determining the underlying chipset identification. This corresponds to the following kernel parameter setting:
Xenomai warns you about potential problems ahead due to your current chipset enabling SMIs, by issuing this warning to the kernel log:
Xenomai: SMI-enabled chipset found, but SMI workaround disabled
At this point, you may want to know whether such warning really
applies to your case. To this end, you should run Xenomai’s
test program under load, checking for pathological latency
("pathological" meaning more than, say, 100 micro-seconds).
If you do not observe any such latency spots, then this warning is harmless and you can proceed as follows:
optionally turn this warning off by disabling Xenomai’s SMI detection entirely. This is done by adding this parameter to the kernel command line:
you may safely skip the rest of this discussion.
Otherwise, if you did observe any pathological latency spot, then you have a problem with SMIs, and this warning was intended to you.
Some processors have a model specific register (MSR), returning the
count of SMI since boot. The
rdmsr tool from the
msr-tools package allows reading this MSR with the
# rdmsr 0x34
rdmsr will return an error message if your processor does not have that
register. Using this tool before and after the latency test shows a high
latency, you will be able to confirm that the issue you have is due to SMI.
Xenomai allows you to enable two workarounds via kernel parameters which may help you.
|As the name suggests, such workarounds do not fix the main issue, they merely try mitigating the impact of it, at the expense of disabling SMI generation for certain sources when/if the chipset allows it. However, you must make sure by yourself that disabling SMI sources for your chipset is safe, and will not cause hazards for your hardware.|
The first workaround which you may try is disabling all SMI sources as follows:
Once done, you have to check that:
the kernel log messages do not contain the message:
Xenomai: SMI workaround failed!
if they do, skip to the next section.
every device on your system is still responding properly (e.g. keyboard, mouse, NIC).
your motherboard is not overheating even under sustained high load conditions. In case of unexpected and intempestive reboots while stress-testing your system, then it is most likely that you should re-enable SMIs immediately, and abandon this approach.
the latency test does not reveal any pathological spot anymore.
If only a particular device is not working properly, then it probably requires SMIs, in which case disabling them globally is not an option. However, you might have some luck disabling all SMI sources but the one required by this device.
The same goes in case of system overheating: you might try to keep the SMI source for thermal control enabled, disabling others.
In order to selectively control SMI sources, check the documentation of your Intel chipset, looking for the discussion about the SMI_EN register, and the bit values corresponding to SMI sources defined for such chipset.
You can pass a bit mask to the kernel parameter below, so that Xenomai will attempt to disable each SMI source whose bit is cleared in the <enable-mask> value, leaving other sources enabled:
Again, check that the kernel log messages do not contain:
Xenomai: SMI workaround failed!
If they contain this message, you can not use Xenomai SMI workaround to avoid SMI, you should check your BIOS for settings that are likely to cause SMI.
Using a careful and incremental approach, refining the set of disabled sources, you should try stopping only the SMI source causing the pathological latency, keeping the rest of the system safe and sane. Each iteration should revalidate the current status by running the standard Xenomai latency test.