Skip to content

GitLab

S
SPARC U-Boot Custodian Tree
Commit a6c7ad2f authored by wdenk's avatar wdenk
Browse files
Options

* Fix startup problems with VFD display on TRAB 

* Patch by Pierre Aubert, 20 Nov 2002
  Add driver for Epson SED13806 graphic controller.
  Add support for BMP logos in cfb_console driver.
parent ea909b76
Hide whitespace changes
Inline Side-by-side
Showing with 1000 additions and 104 deletions
CHANGELOG
View file @ a6c7ad2f
......@@ -2,6 +2,12 @@
Changes since for U-Boot 0.1.0:
======================================================================
* Fix startup problems with VFD display on TRAB
* Patch by Pierre Aubert, 20 Nov 2002
Add driver for Epson SED13806 graphic controller.
Add support for BMP logos in cfb_console driver.
* Added support for both PCMCIA slots (at the same time!) on MPC8xx
* Patch by Rod Boyce, 21 Nov 2002:
......
README
View file @ a6c7ad2f
......@@ -423,6 +423,9 @@ The following options need to be configured:
(requires CFG_CMD_DATE)
CONFIG_VIDEO_LOGO display Linux logo in
upper left corner
CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of
linux_logo.h for logo.
Requires CONFIG_VIDEO_LOGO
CONFIG_CONSOLE_EXTRA_INFO
addional board info beside
the logo
......@@ -710,6 +713,12 @@ The following options need to be configured:
16,7 Mill (24bit) 315 318 31b
(i.e. setenv videomode 317; saveenv; reset;)
CONFIG_VIDEO_SED13806
Enable Epson SED13806 driver. This driver supports 8bpp
and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
or CONFIG_VIDEO_SED13806_16BPP
- LCD Support: CONFIG_LCD
Define this to enable LCD support (for output to LCD
......
board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross
View file @ a6c7ad2f
......@@ -30,6 +30,9 @@
#
#############################################################################
CC = $(CROSS_COMPILE)gcc
AR = $(CROSS_COMPILE)ar
TARGETLIB = libx86emu.a
TARGETDEBUGLIB =libx86emud.a
......@@ -54,26 +57,26 @@ DEBUGOBJS=debug.d \
all: $(TARGETLIB) $(TARGETDEBUGLIB)
$(TARGETLIB): $(OBJS)
ppc-elf32-ar rv $(TARGETLIB) $(OBJS)
$(AR) rv $(TARGETLIB) $(OBJS)
$(TARGETDEBUGLIB): $(DEBUGOBJS)
ppc-elf32-ar rv $(TARGETDEBUGLIB) $(DEBUGOBJS)
$(AR) rv $(TARGETDEBUGLIB) $(DEBUGOBJS)
INCS = -I. -Ix86emu -I../../include
CFLAGS = -D__DRIVER__ -DFORCE_POST -D_CEXPORT= -DNO_LONG_LONG -Dprintk=printf -fsigned-char -fomit-frame-pointer -mrelocatable -ffixed-r14 -meabi -mrelocatable -ffixed-r14 -meabi
CDEBUGFLAGS = -DDEBUG
.c.o:
ppc-elf32-gcc -g -O2 -Wall -c $(CFLAGS) $(INCS) $*.c
$(CC) -g -O2 -Wall -c $(CFLAGS) $(INCS) $*.c
.c.d:
ppc-elf32-gcc -g -O2 -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c
$(CC) -g -O2 -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c
.cpp.o:
ppc-elf32-gcc -c $(CFLAGS) $(INCS) $*.cpp
$(CC) -c $(CFLAGS) $(INCS) $*.cpp
clean:
rm -f *.a *.o *.d
validate: validate.o libx86emu.a
ppc-elf32-gcc -o validate validate.o -lx86emu -L.
$(CC) -o validate validate.o -lx86emu -L.
board/RPXClassic/Makefile
View file @ a6c7ad2f
......@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
OBJS = $(BOARD).o flash.o eccx.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $^
......
board/RPXClassic/eccx.c 0 → 100644
View file @ a6c7ad2f
/*
* (C) Copyright 2002
* Stubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* Video support for the ECCX daughter board */
#include <common.h>
#include <config.h>
#ifdef CONFIG_VIDEO_SED13806
#include <sed13806.h>
/* Screen configurations: the initialization of the SD13806 depends on
screen and on display mode. We handle only 8bpp and 16 bpp modes */
/* ECCX board is supplied with a NEC NL6448BC20 screen */
#ifdef CONFIG_NEC_NL6448BC20
#define DISPLAY_WIDTH 640
#define DISPLAY_HEIGHT 480
#ifdef CONFIG_VIDEO_SED13806_8BPP
static const S1D_REGS init_regs [] =
{
{0x0001,0x00}, // Miscellaneous Register
{0x01FC,0x00}, // Display Mode Register
{0x0004,0x1b}, // General IO Pins Configuration Register 0
{0x0005,0x00}, // General IO Pins Configuration Register 1
{0x0008,0xe5}, // General IO Pins Control Register 0
{0x0009,0x1f}, // General IO Pins Control Register 1
{0x0010,0x02}, // Memory Clock Configuration Register
{0x0014,0x10}, // LCD Pixel Clock Configuration Register
{0x0018,0x02}, // CRT/TV Pixel Clock Configuration Register
{0x001C,0x02}, // MediaPlug Clock Configuration Register
{0x001E,0x01}, // CPU To Memory Wait State Select Register
{0x0021,0x04}, // DRAM Refresh Rate Register
{0x002A,0x00}, // DRAM Timings Control Register 0
{0x002B,0x01}, // DRAM Timings Control Register 1
{0x0020,0x80}, // Memory Configuration Register
{0x0030,0x25}, // Panel Type Register
{0x0031,0x00}, // MOD Rate Register
{0x0032,0x4F}, // LCD Horizontal Display Width Register
{0x0034,0x13}, // LCD Horizontal Non-Display Period Register
{0x0035,0x01}, // TFT FPLINE Start Position Register
{0x0036,0x0B}, // TFT FPLINE Pulse Width Register
{0x0038,0xDF}, // LCD Vertical Display Height Register 0
{0x0039,0x01}, // LCD Vertical Display Height Register 1
{0x003A,0x2C}, // LCD Vertical Non-Display Period Register
{0x003B,0x00}, // TFT FPFRAME Start Position Register
{0x003C,0x01}, // TFT FPFRAME Pulse Width Register
{0x0040,0x03}, // LCD Display Mode Register
{0x0041,0x02}, // LCD Miscellaneous Register
{0x0042,0x00}, // LCD Display Start Address Register 0
{0x0043,0x00}, // LCD Display Start Address Register 1
{0x0044,0x00}, // LCD Display Start Address Register 2
{0x0046,0x40}, // LCD Memory Address Offset Register 0
{0x0047,0x01}, // LCD Memory Address Offset Register 1
{0x0048,0x00}, // LCD Pixel Panning Register
{0x004A,0x00}, // LCD Display FIFO High Threshold Control Register
{0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register
{0x0050,0x4F}, // CRT/TV Horizontal Display Width Register
{0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register
{0x0053,0x01}, // CRT/TV HRTC Start Position Register
{0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register
{0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0
{0x0057,0x01}, // CRT/TV Vertical Display Height Register 1
{0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register
{0x0059,0x09}, // CRT/TV VRTC Start Position Register
{0x005A,0x01}, // CRT/TV VRTC Pulse Width Register
{0x005B,0x00}, // TV Output Control Register
{0x0060,0x03}, // CRT/TV Display Mode Register
{0x0062,0x00}, // CRT/TV Display Start Address Register 0
{0x0063,0x00}, // CRT/TV Display Start Address Register 1
{0x0064,0x00}, // CRT/TV Display Start Address Register 2
{0x0066,0x40}, // CRT/TV Memory Address Offset Register 0
{0x0067,0x01}, // CRT/TV Memory Address Offset Register 1
{0x0068,0x00}, // CRT/TV Pixel Panning Register
{0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register
{0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register
{0x0070,0x00}, // LCD Ink/Cursor Control Register
{0x0071,0x00}, // LCD Ink/Cursor Start Address Register
{0x0072,0x00}, // LCD Cursor X Position Register 0
{0x0073,0x00}, // LCD Cursor X Position Register 1
{0x0074,0x00}, // LCD Cursor Y Position Register 0
{0x0075,0x00}, // LCD Cursor Y Position Register 1
{0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register
{0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register
{0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register
{0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register
{0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register
{0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register
{0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register
{0x0080,0x00}, // CRT/TV Ink/Cursor Control Register
{0x0081,0x00}, // CRT/TV Ink/Cursor Start Address Register
{0x0082,0x00}, // CRT/TV Cursor X Position Register 0
{0x0083,0x00}, // CRT/TV Cursor X Position Register 1
{0x0084,0x00}, // CRT/TV Cursor Y Position Register 0
{0x0085,0x00}, // CRT/TV Cursor Y Position Register 1
{0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register
{0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register
{0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register
{0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register
{0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register
{0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register
{0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register
{0x0100,0x00}, // BitBlt Control Register 0
{0x0101,0x00}, // BitBlt Control Register 1
{0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register
{0x0103,0x00}, // BitBlt Operation Register
{0x0104,0x00}, // BitBlt Source Start Address Register 0
{0x0105,0x00}, // BitBlt Source Start Address Register 1
{0x0106,0x00}, // BitBlt Source Start Address Register 2
{0x0108,0x00}, // BitBlt Destination Start Address Register 0
{0x0109,0x00}, // BitBlt Destination Start Address Register 1
{0x010A,0x00}, // BitBlt Destination Start Address Register 2
{0x010C,0x00}, // BitBlt Memory Address Offset Register 0
{0x010D,0x00}, // BitBlt Memory Address Offset Register 1
{0x0110,0x00}, // BitBlt Width Register 0
{0x0111,0x00}, // BitBlt Width Register 1
{0x0112,0x00}, // BitBlt Height Register 0
{0x0113,0x00}, // BitBlt Height Register 1
{0x0114,0x00}, // BitBlt Background Color Register 0
{0x0115,0x00}, // BitBlt Background Color Register 1
{0x0118,0x00}, // BitBlt Foreground Color Register 0
{0x0119,0x00}, // BitBlt Foreground Color Register 1
{0x01E0,0x00}, // Look-Up Table Mode Register
{0x01E2,0x00}, // Look-Up Table Address Register
{0x01E4,0x00}, // Look-Up Table Data Register
{0x01F0,0x10}, // Power Save Configuration Register
{0x01F1,0x00}, // Power Save Status Register
{0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register
{0x01FC,0x01}, // Display Mode Register
{0, 0}
};
#endif /* CONFIG_VIDEO_SED13806_8BPP */
#ifdef CONFIG_VIDEO_SED13806_16BPP
static const S1D_REGS init_regs [] =
{
{0x0001,0x00}, // Miscellaneous Register
{0x01FC,0x00}, // Display Mode Register
{0x0004,0x1b}, // General IO Pins Configuration Register 0
{0x0005,0x00}, // General IO Pins Configuration Register 1
{0x0008,0xe5}, // General IO Pins Control Register 0
{0x0009,0x1f}, // General IO Pins Control Register 1
{0x0010,0x02}, // Memory Clock Configuration Register
{0x0014,0x10}, // LCD Pixel Clock Configuration Register
{0x0018,0x02}, // CRT/TV Pixel Clock Configuration Register
{0x001C,0x02}, // MediaPlug Clock Configuration Register
{0x001E,0x01}, // CPU To Memory Wait State Select Register
{0x0021,0x04}, // DRAM Refresh Rate Register
{0x002A,0x00}, // DRAM Timings Control Register 0
{0x002B,0x01}, // DRAM Timings Control Register 1
{0x0020,0x80}, // Memory Configuration Register
{0x0030,0x25}, // Panel Type Register
{0x0031,0x00}, // MOD Rate Register
{0x0032,0x4F}, // LCD Horizontal Display Width Register
{0x0034,0x13}, // LCD Horizontal Non-Display Period Register
{0x0035,0x01}, // TFT FPLINE Start Position Register
{0x0036,0x0B}, // TFT FPLINE Pulse Width Register
{0x0038,0xDF}, // LCD Vertical Display Height Register 0
{0x0039,0x01}, // LCD Vertical Display Height Register 1
{0x003A,0x2C}, // LCD Vertical Non-Display Period Register
{0x003B,0x00}, // TFT FPFRAME Start Position Register
{0x003C,0x01}, // TFT FPFRAME Pulse Width Register
{0x0040,0x05}, // LCD Display Mode Register
{0x0041,0x02}, // LCD Miscellaneous Register
{0x0042,0x00}, // LCD Display Start Address Register 0
{0x0043,0x00}, // LCD Display Start Address Register 1
{0x0044,0x00}, // LCD Display Start Address Register 2
{0x0046,0x80}, // LCD Memory Address Offset Register 0
{0x0047,0x02}, // LCD Memory Address Offset Register 1
{0x0048,0x00}, // LCD Pixel Panning Register
{0x004A,0x00}, // LCD Display FIFO High Threshold Control Register
{0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register
{0x0050,0x4F}, // CRT/TV Horizontal Display Width Register
{0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register
{0x0053,0x01}, // CRT/TV HRTC Start Position Register
{0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register
{0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0
{0x0057,0x01}, // CRT/TV Vertical Display Height Register 1
{0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register
{0x0059,0x09}, // CRT/TV VRTC Start Position Register
{0x005A,0x01}, // CRT/TV VRTC Pulse Width Register
{0x005B,0x00}, // TV Output Control Register
{0x0060,0x05}, // CRT/TV Display Mode Register
{0x0062,0x00}, // CRT/TV Display Start Address Register 0
{0x0063,0x00}, // CRT/TV Display Start Address Register 1
{0x0064,0x00}, // CRT/TV Display Start Address Register 2
{0x0066,0x80}, // CRT/TV Memory Address Offset Register 0
{0x0067,0x02}, // CRT/TV Memory Address Offset Register 1
{0x0068,0x00}, // CRT/TV Pixel Panning Register
{0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register
{0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register
{0x0070,0x00}, // LCD Ink/Cursor Control Register
{0x0071,0x00}, // LCD Ink/Cursor Start Address Register
{0x0072,0x00}, // LCD Cursor X Position Register 0
{0x0073,0x00}, // LCD Cursor X Position Register 1
{0x0074,0x00}, // LCD Cursor Y Position Register 0
{0x0075,0x00}, // LCD Cursor Y Position Register 1
{0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register
{0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register
{0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register
{0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register
{0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register
{0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register
{0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register
{0x0080,0x00}, // CRT/TV Ink/Cursor Control Register
{0x0081,0x00}, // CRT/TV Ink/Cursor Start Address Register
{0x0082,0x00}, // CRT/TV Cursor X Position Register 0
{0x0083,0x00}, // CRT/TV Cursor X Position Register 1
{0x0084,0x00}, // CRT/TV Cursor Y Position Register 0
{0x0085,0x00}, // CRT/TV Cursor Y Position Register 1
{0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register
{0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register
{0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register
{0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register
{0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register
{0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register
{0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register
{0x0100,0x00}, // BitBlt Control Register 0
{0x0101,0x00}, // BitBlt Control Register 1
{0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register
{0x0103,0x00}, // BitBlt Operation Register
{0x0104,0x00}, // BitBlt Source Start Address Register 0
{0x0105,0x00}, // BitBlt Source Start Address Register 1
{0x0106,0x00}, // BitBlt Source Start Address Register 2
{0x0108,0x00}, // BitBlt Destination Start Address Register 0
{0x0109,0x00}, // BitBlt Destination Start Address Register 1
{0x010A,0x00}, // BitBlt Destination Start Address Register 2
{0x010C,0x00}, // BitBlt Memory Address Offset Register 0
{0x010D,0x00}, // BitBlt Memory Address Offset Register 1
{0x0110,0x00}, // BitBlt Width Register 0
{0x0111,0x00}, // BitBlt Width Register 1
{0x0112,0x00}, // BitBlt Height Register 0
{0x0113,0x00}, // BitBlt Height Register 1
{0x0114,0x00}, // BitBlt Background Color Register 0
{0x0115,0x00}, // BitBlt Background Color Register 1
{0x0118,0x00}, // BitBlt Foreground Color Register 0
{0x0119,0x00}, // BitBlt Foreground Color Register 1
{0x01E0,0x01}, // Look-Up Table Mode Register
{0x01E2,0x00}, // Look-Up Table Address Register
{0x01E4,0x00}, // Look-Up Table Data Register
{0x01F0,0x10}, // Power Save Configuration Register
{0x01F1,0x00}, // Power Save Status Register
{0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register
{0x01FC,0x01}, // Display Mode Register
{0, 0}
};
#endif /* CONFIG_VIDEO_SED13806_16BPP */
#endif /* CONFIG_NEC_NL6448BC20 */
#ifdef CONFIG_CONSOLE_EXTRA_INFO
/*-----------------------------------------------------------------------------
* video_get_info_str -- setup a board string: type, speed, etc.
* line_number= location to place info string beside logo
* info= buffer for info string
*-----------------------------------------------------------------------------
*/
void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
strcpy (info, " RPXClassic board");
}
else {
info [0] = '\0';
}
}
#endif
/*-----------------------------------------------------------------------------
* board_video_init -- init de l'EPSON, config du CS
*-----------------------------------------------------------------------------
*/
unsigned int board_video_init (void)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
/* Program ECCX registers */
*(ECCX_CSR12) |= ECCX_860;
*(ECCX_CSR8) |= ECCX_BE | ECCX_CS2;
*(ECCX_CSR8) |= ECCX_ENEPSON;
memctl->memc_or2 = SED13806_OR;
memctl->memc_br2 = SED13806_REG_ADDR | SED13806_ACCES;
return (SED13806_REG_ADDR);
}
/*-----------------------------------------------------------------------------
* board_validate_screen --
*-----------------------------------------------------------------------------
*/
void board_validate_screen (unsigned int base)
{
/* Activate the panel bias power */
*(volatile unsigned char *)(base + REG_GPIO_CTRL) = 0x80;
}
/*-----------------------------------------------------------------------------
* board_get_regs --
*-----------------------------------------------------------------------------
*/
const S1D_REGS *board_get_regs (void)
{
return (init_regs);
}
/*-----------------------------------------------------------------------------
* board_get_width --
*-----------------------------------------------------------------------------
*/
int board_get_width (void)
{
return (DISPLAY_WIDTH);
}
/*-----------------------------------------------------------------------------
* board_get_height --
*-----------------------------------------------------------------------------
*/
int board_get_height (void)
{
return (DISPLAY_HEIGHT);
}
#endif /* CONFIG_VIDEO_SED13806 */
board/eltec/bab7xx/asm_init.S
View file @ a6c7ad2f
......@@ -24,7 +24,7 @@
*/
#include <config.h>
#include <mpc75x.h>
#include <74xx_7xx.h>
#include <mpc106.h>
#include <version.h>
......
board/trab/trab.c
View file @ a6c7ad2f
......@@ -60,6 +60,12 @@ static void udelay_no_timer (int usec)
int board_init ()
{
#if defined(CONFIG_MODEM_SUPPORT) && defined(CONFIG_VFD)
ulong size;
unsigned long addr;
extern void mem_malloc_init (ulong);
extern int drv_vfd_init(void);
#endif
DECLARE_GLOBAL_DATA_PTR;
/* memory and cpu-speed are setup before relocation */
......@@ -102,25 +108,24 @@ int board_init ()
gd->bd->bi_boot_params = 0x0c000100;
#ifdef CONFIG_MODEM_SUPPORT
/* This stuff is needed by the CPLD to read keyboard data.
* (Copied from the LCD initialization routine.)
*/
if (rLCDCON1 == 0) {
extern void init_grid_ctrl(void);
rPCCON = (rPCCON & 0xFFFFFF00)| 0x000000AA;
rPDCON = (rPDCON & 0xFFFFFF03)| 0x000000A8;
#if 0
rPDCON = (rPDCON & 0xFFFFFF00)| 0x000000AA;
#ifdef CONFIG_VFD
#ifndef PAGE_SIZE
#define PAGE_SIZE 4096
#endif
rLCDCON2 = 0x000DC000;
rLCDCON3 = 0x0051000A;
rLCDCON4 = 0x00000001;
rLCDCON5 = 0x00000440;
rLCDCON1 = 0x00000B75;
init_grid_ctrl();
}
/*
* reserve memory for VFD display (always full pages)
*/
/* armboot_real_end is defined in the board-specific linker script */
addr = (_armboot_real_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
size = vfd_setmem (addr);
gd->fb_base = addr;
/* round to the next page boundary */
addr += size;
addr = (addr + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
mem_malloc_init (addr);
/* must do this after the framebuffer is allocated */
drv_vfd_init();
#endif /* CONFIG_VFD */
udelay_no_timer (KBD_MDELAY);
......
board/trab/vfd.c
View file @ a6c7ad2f
......@@ -339,9 +339,14 @@ void transfer_pic(int display, unsigned char *adr, int height, int width)
int drv_vfd_init(void)
{
ulong palette;
static int vfd_init_done = 0;
DECLARE_GLOBAL_DATA_PTR;
if (vfd_init_done != 0)
return;
vfd_init_done = 1;
vfdbase = gd->fb_base;
create_vfd_table();
init_grid_ctrl();
......
common/cmd_pcmcia.c
View file @ a6c7ad2f
......@@ -2062,7 +2062,7 @@ static int hardware_enable(int slot)
/*
* Power On.
*/
printf("\n Slot %c:", 'A' + slot);
printf("%s Slot %c:", slot ? "" : "\n", 'A' + slot);
mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
reg = pcmp->pcmc_pipr;
debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
......
common/devices.c
View file @ a6c7ad2f
......@@ -177,7 +177,7 @@ int devices_init (void)
#ifdef CONFIG_LCD
drv_lcd_init ();
#endif
#ifdef CONFIG_VIDEO
#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
drv_video_init ();
#endif
#ifdef CONFIG_WL_4PPM_KEYBOARD
......
common/main.c
View file @ a6c7ad2f
......@@ -21,6 +21,8 @@
* MA 02111-1307 USA
*/
/* #define DEBUG */
#include <common.h>
#include <watchdog.h>
#include <command.h>
......@@ -304,9 +306,7 @@ void main_loop (void)
s = getenv ("bootdelay");
bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY;
#if 0
printf ("### main_loop entered:\n\n");
#endif
debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay);
# ifdef CONFIG_BOOT_RETRY_TIME
s = getenv ("bootretry");
......@@ -319,6 +319,9 @@ void main_loop (void)
# endif /* CONFIG_BOOT_RETRY_TIME */
s = getenv ("bootcmd");
debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
if (bootdelay >= 0 && s && !abortboot (bootdelay)) {
# ifdef CONFIG_AUTOBOOT_KEYED
int prev = disable_ctrlc(1); /* disable Control C checking */
......@@ -337,11 +340,9 @@ void main_loop (void)
}
# ifdef CONFIG_MENUKEY
if (menukey == CONFIG_MENUKEY)
{
if (menukey == CONFIG_MENUKEY) {
s = getenv("menucmd");
if (s)
{
if (s) {
# ifndef CFG_HUSH_PARSER
run_command (s, bd, 0);
# else
......
drivers/Makefile
View file @ a6c7ad2f
......@@ -31,7 +31,7 @@ OBJS = 3c589.o 5701rls.o bcm570x.o bcm570x_autoneg.o \
cfb_console.o cs8900.o dc2114x.o eepro100.o \
i8042.o natsemi.o ns16550.o ns8382x.o ns87308.o \
pci.o pci_auto.o pci_indirect.o \
pcnet.o serial.o \
pcnet.o sed13806.o serial.o \
smc91111.o smiLynxEM.o sym53c8xx.o \
tigon3.o w83c553f.o ct69000.o
......
drivers/cfb_console.c
View file @ a6c7ad2f
......@@ -65,6 +65,7 @@
CONFIG_CONSOLE_TIME - display time/date in upper right corner,
needs CFG_CMD_DATE and CONFIG_CONSOLE_CURSOR
CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner
CONFIG_VIDEO_BMP_LOGO - use bmp_logo instead of linux_logo
CONFIG_CONSOLE_EXTRA_INFO - display additional board information strings
that normaly goes to serial port. This define
requires a board specific function:
......@@ -93,6 +94,8 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the
#ifdef CONFIG_CFB_CONSOLE
#include <malloc.h>
/*****************************************************************************/
/* Console device defines with SMI graphic */
/* Any other graphic must change this section */
......@@ -115,6 +118,16 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the
#define VIDEO_HW_BITBLT
#endif
/*****************************************************************************/
/* Defines for the SED13806 driver */
/*****************************************************************************/
#ifdef CONFIG_VIDEO_SED13806
#define VIDEO_FB_LITTLE_ENDIAN
#define VIDEO_HW_RECTFILL
#define VIDEO_HW_BITBLT
#endif
/*****************************************************************************/
/* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc */
/*****************************************************************************/
......@@ -217,6 +230,14 @@ void console_cursor (int state);
#endif /* CONFIG_VIDEO_HW_CURSOR */
#ifdef CONFIG_VIDEO_LOGO
#ifdef CONFIG_VIDEO_BMP_LOGO
#include <bmp_logo.h>
#define VIDEO_LOGO_WIDTH BMP_LOGO_WIDTH
#define VIDEO_LOGO_HEIGHT BMP_LOGO_HEIGHT
#define VIDEO_LOGO_LUT_OFFSET BMP_LOGO_OFFSET
#define VIDEO_LOGO_COLORS BMP_LOGO_COLORS
#else /* CONFIG_VIDEO_BMP_LOGO */
#define LINUX_LOGO_WIDTH 80
#define LINUX_LOGO_HEIGHT 80