Commit 0c8721a4 authored by Wolfgang Denk's avatar Wolfgang Denk

Cleanup (PPC4xx is AMCC now)

parent a6e6cf00
......@@ -2,6 +2,8 @@
Changes for U-Boot 1.1.4:
======================================================================
* Cleanup (PPC4xx is AMCC now)
* esd CPCI2DP board added
Patch by Matthias Fuchs, 22 Sep 2005
......
......@@ -340,7 +340,7 @@ W: http://www.windriver.com
N: Stefan Roese
E: stefan.roese@esd-electronics.com
D: IBM PPC401/403/405GP Support; Windows environment support
D: AMCC PPC401/403/405GP Support; Windows environment support
N: Erwin Rol
E: erwin@muffin.org
......@@ -356,7 +356,7 @@ D: Author of LiMon-1.4.2, which contributed some ideas
N: Travis B. Sawyer
E: travis.sawyer@sandburst.com
D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board. IBM 440gx Ref Platform (Ocotea)
D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board. AMCC 440gx Ref Platform (Ocotea)
N: Paolo Scaffardi
E: arsenio@tin.it
......
......@@ -145,7 +145,7 @@ Directory Hierarchy:
- mpc85xx Files specific to Freescale MPC85xx CPUs
- nios Files specific to Altera NIOS CPUs
- nios2 Files specific to Altera Nios-II CPUs
- ppc4xx Files specific to IBM PowerPC 4xx CPUs
- ppc4xx Files specific to AMCC PowerPC 4xx CPUs
- pxa Files specific to Intel XScale PXA CPUs
- s3c44b0 Files specific to Samsung S3C44B0 CPUs
- sa1100 Files specific to Intel StrongARM SA1100 CPUs
......@@ -497,7 +497,7 @@ The following options need to be configured:
- Console UART Number:
CONFIG_UART1_CONSOLE
IBM PPC4xx only.
AMCC PPC4xx only.
If defined internal UART1 (and not UART0) is used
as default U-Boot console.
......
......@@ -656,7 +656,7 @@ char * kbd_initialize(void)
| KBD_MODE_DISABLE_MOUSE
| KBD_MODE_KCC);
/* ibm powerpc portables need this to use scan-code set 1 -- Cort */
/* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
kbd_write_command_w(KBD_CCMD_READ_MODE);
if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
/*
......
......@@ -22,7 +22,7 @@
#
#
# IBM 440GX Reference Platform (Ocotea) board
# AMCC 440GX Reference Platform (Ocotea) board
#
#TEXT_BASE = 0xFFFE0000
......
......@@ -279,10 +279,10 @@ void video_get_info_str (int line_number, char *info)
case 1:
switch (pvr) {
case PVR_405EP_RB:
sprintf (info, " IBM PowerPC 405EP Rev. B");
sprintf (info, " AMCC PowerPC 405EP Rev. B");
break;
default:
sprintf (info, " IBM PowerPC 405EP Rev. <unknown>");
sprintf (info, " AMCC PowerPC 405EP Rev. <unknown>");
break;
}
return;
......
......@@ -26,10 +26,10 @@
#include "eric.h"
#include <asm/processor.h>
#define IBM405GP_GPIO0_OR 0xef600700 /* GPIO Output */
#define IBM405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */
#define IBM405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */
#define IBM405GP_GPIO0_IR 0xef60071c /* GPIO Input */
#define PPC405GP_GPIO0_OR 0xef600700 /* GPIO Output */
#define PPC405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */
#define PPC405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */
#define PPC405GP_GPIO0_IR 0xef60071c /* GPIO Input */
int board_early_init_f (void)
{
......@@ -50,7 +50,7 @@ int board_early_init_f (void)
| IRQ 30 (EXT IRQ 5) PCI INTB#; active low; level sensitive
| IRQ 31 (EXT IRQ 6) PCI INTA#; active low; level sensitive
| -> IRQ6 Pin is NOW GPIO23 and can be activateted by setting
| IBM405GP_GPIO0_TCR Bit 0 = 1 (driving the output as defined in IBM405GP_GPIO0_OR,
| PPC405GP_GPIO0_TCR Bit 0 = 1 (driving the output as defined in PPC405GP_GPIO0_OR,
| else tristate)
| Note for ERIC board:
| An interrupt taken for the HOST (IRQ 28) indicates that
......@@ -70,8 +70,8 @@ int board_early_init_f (void)
mtdcr (cntrl0, 0x00002000); /* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */
out32 (IBM405GP_GPIO0_OR, 0x60000000); /*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */
out32 (IBM405GP_GPIO0_TCR, 0x7E400000);
out32 (PPC405GP_GPIO0_OR, 0x60000000); /*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */
out32 (PPC405GP_GPIO0_TCR, 0x7E400000);
return 0;
}
......
......@@ -29,8 +29,8 @@
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#define IBM_VENDOR_ID 0x1014
#define PPC405_DEVICE_ID 0x0156
#define AMCC_VENDOR_ID 0x1014
#define PPC405_DEVICE_ID 0x0156
/*
......@@ -43,7 +43,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
u32 addr;
while (bdf >= 0) {
if ((bdf = pci_find_device(IBM_VENDOR_ID, PPC405_DEVICE_ID, idx++)) < 0) {
if ((bdf = pci_find_device(AMCC_VENDOR_ID, PPC405_DEVICE_ID, idx++)) < 0) {
break;
}
printf("Found device nr %d at %x!\n", idx-1, bdf);
......
......@@ -613,7 +613,7 @@ char * kbd_initialize(void)
| KBD_MODE_DISABLE_MOUSE
| KBD_MODE_KCC);
/* ibm powerpc portables need this to use scan-code set 1 -- Cort */
/* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
kbd_write_command_w(KBD_CCMD_READ_MODE);
if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
/*
......
......@@ -137,7 +137,7 @@ static struct pci_pip405_config_entry piix4_pmm_cntrl_f3[] = {
{ } /* end of device table */
};
/* PPC405 Dummy only used to prevent autosetup on this host bridge */
static struct pci_pip405_config_entry ibm405_dummy[] = {
static struct pci_pip405_config_entry ppc405_dummy[] = {
{ } /* end of device table */
};
......@@ -150,7 +150,7 @@ static struct pci_config_table pci_pip405_config_table[]={
PCI_DEVICE_ID_IBM_405GP,
PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID, 0,
pci_pip405_write_regs, {(unsigned long) ibm405_dummy}},
pci_pip405_write_regs, {(unsigned long) ppc405_dummy}},
{PCI_VENDOR_ID_INTEL, /* PIIX4 ISA Bridge Function 0 */
PCI_DEVICE_ID_INTEL_82371AB_0,
......
......@@ -77,17 +77,17 @@ fpgaDownload(unsigned char *saddr,
dest = (unsigned short *)daddr;
/* Get DCR output register */
grego = in32(IBM405GP_GPIO0_OR);
grego = in32(PPC405GP_GPIO0_OR);
/* Reset FPGA */
grego &= ~GPIO_XCV_PROG; /* PROG line low */
out32(IBM405GP_GPIO0_OR, grego);
out32(PPC405GP_GPIO0_OR, grego);
/* Setup timeout timer */
start = get_timer(0);
/* Wait for FPGA init line */
while(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
while(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
/* Check for timeout - 100us max, so use 3ms */
if (get_timer(start) > 3) {
printf(" failed to start init.\n");
......@@ -100,10 +100,10 @@ fpgaDownload(unsigned char *saddr,
/* Unreset FPGA */
grego |= GPIO_XCV_PROG; /* PROG line high */
out32(IBM405GP_GPIO0_OR, grego);
out32(PPC405GP_GPIO0_OR, grego);
/* Wait for FPGA end of init period . */
while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
/* Check for timeout */
if (get_timer(start) > 3) {
......@@ -112,7 +112,7 @@ fpgaDownload(unsigned char *saddr,
/* Reset FPGA */
grego &= ~GPIO_XCV_PROG; /* PROG line low */
out32(IBM405GP_GPIO0_OR, grego);
out32(PPC405GP_GPIO0_OR, grego);
goto done;
}
......@@ -127,18 +127,18 @@ fpgaDownload(unsigned char *saddr,
mtdcr(CPC0_CR0, greg); /* ... just do it */
/* turn on open drain for CNFG */
greg = in32(IBM405GP_GPIO0_ODR); /* get open drain register */
greg = in32(PPC405GP_GPIO0_ODR); /* get open drain register */
greg |= cnfg; /* CNFG open drain */
out32(IBM405GP_GPIO0_ODR, greg); /* .. just do it */
out32(PPC405GP_GPIO0_ODR, greg); /* .. just do it */
/* Turn output enable on for CNFG */
greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */
greg |= cnfg; /* CNFG tristate inactive */
out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
out32(PPC405GP_GPIO0_TCR, greg); /* ... just do it */
/* Setup FPGA for programming */
grego &= ~cnfg; /* CONFIG line low */
out32(IBM405GP_GPIO0_OR, grego);
out32(PPC405GP_GPIO0_OR, grego);
/*
* Program the FPGA
......@@ -149,12 +149,12 @@ fpgaDownload(unsigned char *saddr,
/* Done programming */
grego |= cnfg; /* CONFIG line high */
out32(IBM405GP_GPIO0_OR, grego);
out32(PPC405GP_GPIO0_OR, grego);
/* Turn output enable OFF for CNFG */
greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */
greg &= ~cnfg; /* CNFG tristate inactive */
out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
out32(PPC405GP_GPIO0_TCR, greg); /* ... just do it */
/* Toggle IRQ/GPIO */
greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
......@@ -180,7 +180,7 @@ fpgaDownload(unsigned char *saddr,
start = get_timer(0);
/* Wait for FPGA end of programming period . */
while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
/* Check for timeout */
if (get_timer(start) > 3) {
......@@ -189,7 +189,7 @@ fpgaDownload(unsigned char *saddr,
/* Reset FPGA */
grego &= ~GPIO_XCV_PROG; /* PROG line low */
out32(IBM405GP_GPIO0_OR, grego);
out32(PPC405GP_GPIO0_OR, grego);
goto done;
}
......
......@@ -47,9 +47,9 @@ int board_early_init_f (void)
/*
* Setup GPIO pins - reset devices.
*/
out32 (IBM405GP_GPIO0_ODR, 0x10000000); /* one open drain pin */
out32 (IBM405GP_GPIO0_OR, 0x3E000000); /* set output pins to default */
out32 (IBM405GP_GPIO0_TCR, 0x7f800000); /* setup for output */
out32 (PPC405GP_GPIO0_ODR, 0x10000000); /* one open drain pin */
out32 (PPC405GP_GPIO0_OR, 0x3E000000); /* set output pins to default */
out32 (PPC405GP_GPIO0_TCR, 0x7f800000); /* setup for output */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
......@@ -78,9 +78,9 @@ int board_early_init_f (void)
/*
* Setup GPIO pins
*/
out32 (IBM405GP_GPIO0_ODR, 0x01800000); /* XCV Done Open Drain */
out32 (IBM405GP_GPIO0_OR, 0x03800000); /* set out pins to default */
out32 (IBM405GP_GPIO0_TCR, 0x66C00000); /* setup for output */
out32 (PPC405GP_GPIO0_ODR, 0x01800000); /* XCV Done Open Drain */
out32 (PPC405GP_GPIO0_OR, 0x03800000); /* set out pins to default */
out32 (PPC405GP_GPIO0_TCR, 0x66C00000); /* setup for output */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
......@@ -238,14 +238,14 @@ int misc_init_r (void)
#if defined(CONFIG_W7OLMG)
unsigned long greg; /* GPIO Register */
greg = in32 (IBM405GP_GPIO0_OR);
greg = in32 (PPC405GP_GPIO0_OR);
/*
* XXX - Unreset devices - this should be moved into VxWorks driver code
*/
greg |= 0x41800000L; /* SAM, PHY, Galileo */
out32 (IBM405GP_GPIO0_OR, greg); /* set output pins to default */
out32 (PPC405GP_GPIO0_OR, greg); /* set output pins to default */
#endif /* CONFIG_W7OLMG */
/*
......
......@@ -25,13 +25,13 @@
#define _W7O_H_
#include <config.h>
/* IBM 405GP PowerPC GPIO registers */
#define IBM405GP_GPIO0_OR 0xef600700L /* GPIO Output */
#define IBM405GP_GPIO0_TCR 0xef600704L /* GPIO Three-State Control */
#define IBM405GP_GPIO0_ODR 0xef600718L /* GPIO Open Drain */
#define IBM405GP_GPIO0_IR 0xef60071cL /* GPIO Input */
/* AMCC 405GP PowerPC GPIO registers */
#define PPC405GP_GPIO0_OR 0xef600700L /* GPIO Output */
#define PPC405GP_GPIO0_TCR 0xef600704L /* GPIO Three-State Control */
#define PPC405GP_GPIO0_ODR 0xef600718L /* GPIO Open Drain */
#define PPC405GP_GPIO0_IR 0xef60071cL /* GPIO Input */
/* IBM 405GP DCRs */
/* AMCC 405GP DCRs */
#define CPC0_CR0 0xb1 /* Chip control register 0 */
/* LMG FPGA <=> CPU GPIO signals */
......
......@@ -22,7 +22,7 @@
*/
/*
* IBM 4XX DCR Functions
* AMCC 4XX DCR Functions
*/
#include <common.h>
......@@ -31,89 +31,91 @@
#if defined(CONFIG_4xx) && (CONFIG_COMMANDS & CFG_CMD_SETGETDCR)
/* ======================================================================
* Interpreter command to retrieve an IBM PPC 4xx Device Control Register
* ======================================================================
/* =======================================================================
* Interpreter command to retrieve an AMCC PPC 4xx Device Control Register
* =======================================================================
*/
int do_getdcr ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
{
unsigned short dcrn; /* Device Control Register Num */
unsigned long value; /* DCR's value */
unsigned short dcrn; /* Device Control Register Num */
unsigned long value; /* DCR's value */
unsigned long get_dcr(unsigned short);
unsigned long get_dcr (unsigned short);
/* Validate arguments */
if (argc < 2) {
printf("Usage:\n%s\n", cmdtp->usage);
return 1;
}
/* Validate arguments */
if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
/* Get a DCR */
dcrn = (unsigned short)simple_strtoul(argv[ 1 ], NULL, 16);
value = get_dcr(dcrn);
/* Get a DCR */
dcrn = (unsigned short) simple_strtoul (argv[1], NULL, 16);
value = get_dcr (dcrn);
printf("%04x: %08lx\n", dcrn, value);
printf ("%04x: %08lx\n", dcrn, value);
return 0;
} /* do_getdcr */
return 0;
}
/* ======================================================================
* Interpreter command to set an IBM PPC 4xx Device Control Register
* Interpreter command to set an AMCC PPC 4xx Device Control Register
* ======================================================================
*/
int do_setdcr ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
int do_setdcr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
unsigned long get_dcr(unsigned short );
unsigned long set_dcr(unsigned short , unsigned long );
unsigned short dcrn; /* Device Control Register Num */
unsigned long value;
/* DCR's value */
int nbytes;
extern char console_buffer[];
/* Validate arguments */
if (argc < 2) {
printf("Usage:\n%s\n", cmdtp->usage);
return 1;
}
/* Set a DCR */
dcrn = (unsigned short)simple_strtoul(argv[1], NULL, 16);
do {
value = get_dcr(dcrn);
printf("%04x: %08lx", dcrn, value);
nbytes = readline(" ? ");
if (nbytes == 0) {
/*
* <CR> pressed as only input, don't modify current
* location and exit command.
*/
nbytes = 1;
return 0;
} else {
unsigned long i;
char *endp;
i = simple_strtoul(console_buffer, &endp, 16);
nbytes = endp - console_buffer;
if (nbytes)
set_dcr(dcrn, i);
unsigned long get_dcr (unsigned short);
unsigned long set_dcr (unsigned short, unsigned long);
unsigned short dcrn; /* Device Control Register Num */
unsigned long value;
/* DCR's value */
int nbytes;
extern char console_buffer[];
/* Validate arguments */
if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
} while (nbytes);
return 0;
} /* do_setdcr */
/* Set a DCR */
dcrn = (unsigned short) simple_strtoul (argv[1], NULL, 16);
do {
value = get_dcr (dcrn);
printf ("%04x: %08lx", dcrn, value);
nbytes = readline (" ? ");
if (nbytes == 0) {
/*
* <CR> pressed as only input, don't modify current
* location and exit command.
*/
nbytes = 1;
return 0;
} else {
unsigned long i;
char *endp;
i = simple_strtoul (console_buffer, &endp, 16);
nbytes = endp - console_buffer;
if (nbytes)
set_dcr (dcrn, i);
}
} while (nbytes);
return 0;
}
/***************************************************/
U_BOOT_CMD(
getdcr, 2, 1, do_getdcr,
"getdcr - Get an IBM PPC 4xx DCR's value\n",
"getdcr - Get an AMCC PPC 4xx DCR's value\n",
"dcrn - return a DCR's value.\n"
);
U_BOOT_CMD(
setdcr, 2, 1, do_setdcr,
"setdcr - Set an IBM PPC 4xx DCR's value\n",
"setdcr - Set an AMCC PPC 4xx DCR's value\n",
"dcrn - set a DCR's value.\n"
);
......
......@@ -90,7 +90,7 @@
#include "vecnum.h"
/*
* Only compile for platform with IBM/AMCC EMAC ethernet controller and
* Only compile for platform with AMCC EMAC ethernet controller and
* network support enabled.
* Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller!
*/
......
......@@ -25,7 +25,7 @@ int bedbug405_clear __P ((int));
/* ======================================================================
* Initialize the global bug_ctx structure for the IBM PPC405. Clear all
* Initialize the global bug_ctx structure for the AMCC PPC405. Clear all
* of the breakpoints.
* ====================================================================== */
......
......@@ -320,7 +320,7 @@ int serial_tstc ()
#endif
#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
#error "External serial clock not supported on IBM PPC405EP!"
#error "External serial clock not supported on AMCC PPC405EP!"
#endif
#define UART_RBR 0x00
......
......@@ -14,7 +14,7 @@
*
* (C) Copyright 2002
* Jun Gu, Artesyn Technology, jung@artesyncp.com
* Support for IBM 440 based on OpenBIOS draminit.c from IBM.
* Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
*
* (C) Copyright 2005
* Stefan Roese, DENX Software Engineering, sr@denx.de.
......@@ -108,7 +108,7 @@ int spd_read(uint addr);
* This function is reading data from the DIMM module EEPROM over the SPD bus
* and uses that to program the sdram controller.
*
* This works on boards that has the same schematics that the IBM walnut has.
* This works on boards that has the same schematics that the AMCC walnut has.
*
* Input: null for default I2C spd functions or a pointer to a custom function
* returning spd_data.
......@@ -696,7 +696,7 @@ long program_bxcr(unsigned long* dimm_populated,
* This function is reading data from the DIMM module EEPROM over the SPD bus
* and uses that to program the sdram controller.
*
* This works on boards that has the same schematics that the IBM walnut has.
* This works on boards that has the same schematics that the AMCC walnut has.
*
* BUG: Don't handle ECC memory
* BUG: A few values in the TR register is currently hardcoded
......
......@@ -42,7 +42,7 @@
/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
/*------------------------------------------------------------------------------- */
/* U-Boot - Startup Code for IBM 4xx PowerPC based Embedded Boards
/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
*
*
* The processor starts at 0xfffffffc and the code is executed
......
......@@ -28,7 +28,7 @@ I2C Edge Conditions:
Notes
-----
!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A IBM 4xx BUG!!!
!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A AMCC 4xx BUG!!!
This reset edge condition could possibly be present in every I2C
controller and device available. For boards where a I2C bus reset
......
......@@ -2,7 +2,7 @@ BEDBUG Support for U-Boot
--------------------------
These changes implement the bedbug (emBEDded deBUGger) debugger in U-Boot.
A specific implementation is made for the IBM405 processor but other flavors
A specific implementation is made for the AMCC 405 processor but other flavors
can be easily implemented.
#####################
......@@ -58,7 +58,7 @@ can be easily implemented.
routines are common to all PowerPC processors.
./cpu/ppc4xx/bedbug_405.c
IBM PPC405 specific debugger routines.
AMCC PPC405 specific debugger routines.
Bedbug support for the MPC860
......
IBM Ebony Board
AMCC Ebony Board
Last Update: September 12, 2002
=======================================================================
This file contains some handy info regarding U-Boot and the IBM
This file contains some handy info regarding U-Boot and the AMCC
Ebony evalutation board. See the README.ppc440 for additional
information.
......
......@@ -5,7 +5,7 @@ Xilinx ML300 platform
---------------
The Xilinx ML300 board is based on the Virtex-II Pro FPGA with
integrated IBM PowerPC 405 core. The board is normally booted from
integrated AMCC PowerPC 405 core. The board is normally booted from
System ACE CF. U-Boot is then run out of main memory.
An FPGA is a configurable and thus very flexible device. To
......
......@@ -130,7 +130,7 @@ Updated 13-July-2004 Jon Loeliger
include/configs/MPC8540ADS.h
include/configs/MPC8560ADS.h
CONFIG_BOOKE BOOKE(e.g. Motorola MPC85xx, IBM 440, etc)
CONFIG_BOOKE BOOKE(e.g. Motorola MPC85xx, AMCC 440, etc)
CONFIG_E500 BOOKE e500 family(Motorola)
CONFIG_MPC85xx MPC8540,MPC8560 and their derivatives
CONFIG_MPC8540 MPC8540 specific
......
IBM Ocotea Board
AMCC Ocotea Board
Last Update: March 2, 2004
=======================================================================
This file contains some handy info regarding U-Boot and the IBM
This file contains some handy info regarding U-Boot and the AMCC
Ocotea 440gx evalutation board. See the README.ppc440 for additional
information.
......@@ -53,7 +53,7 @@ Special note about the Cicada CIS8201:
This has been done in the 440gx_enet.c file with a #ifdef/endif
pair.
IBM does not store the EMAC ethernet addresses within their PIBS bootloader.
AMCC does not store the EMAC ethernet addresses within their PIBS bootloader.
The addresses contained in the config header file are from my particular
board and you _*should*_ change them to reflect your board either in the
config file and/or in your environment variables. I found the addresses on
......
......@@ -75,8 +75,8 @@ powering the board you should see the following message:
U-Boot 1.1.3 (Apr 5 2005 - 22:59:57)
IBM PowerPC 440 GX Rev. C
Board: IBM 440GX Evaluation Board
AMCC PowerPC 440 GX Rev. C
Board: AMCC 440GX Evaluation Board
VCO: 1066 MHz
CPU: 533 MHz
PLB: 152 MHz
......