Commit e0f0657d authored by Heiko Schocher's avatar Heiko Schocher Committed by Stefano Babic

pwm: imx: add Kconfig support

add Kconfig support for this driver.
Signed-off-by: Heiko Schocher's avatarHeiko Schocher <hs@denx.de>
Acked-by: default avatarMartyn Welch <martyn.welch@collabora.co.uk>
parent f6771083
......@@ -960,10 +960,6 @@ The following options need to be configured:
CONFIG_SH_ETHER_CACHE_WRITEBACK
If this option is set, the driver enables cache flush.
- PWM Support:
CONFIG_PWM_IMX
Support for PWM module on the imx6.
- TPM Support:
CONFIG_TPM
Support TPM devices.
......
......@@ -50,6 +50,7 @@ CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
......
......@@ -48,6 +48,7 @@ CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
......
......@@ -49,6 +49,7 @@ CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
......
......@@ -41,6 +41,7 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHYLIB=y
CONFIG_MII=y
CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
......
......@@ -40,6 +40,7 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHYLIB=y
CONFIG_MII=y
CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
......
......@@ -55,6 +55,7 @@ CONFIG_CMD_E1000=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
......
......@@ -43,6 +43,7 @@ CONFIG_FSL_ESDHC_IMX=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX5=y
CONFIG_PWM_IMX=y
CONFIG_RTC_S35392A=y
CONFIG_USB=y
CONFIG_USB_EHCI_MX5=y
......
......@@ -45,6 +45,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_PHYLIB=y
CONFIG_MII=y
CONFIG_PWM_IMX=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_PINCTRL=y
......
......@@ -18,6 +18,11 @@ config PWM_EXYNOS
used. It provides 5 channels which can be independently
programmed. Channel 4 (the last) is normally used as a timer.
config PWM_IMX
bool "Enable support for i.MX27 and later PWM"
help
This PWM is found i.MX27 and later i.MX SoCs.
config PWM_ROCKCHIP
bool "Enable support for the Rockchip PWM"
depends on DM_PWM
......
......@@ -223,7 +223,6 @@
#define CONFIG_IMX_VIDEO_SKIP
#endif
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#ifdef CONFIG_CMD_PCI
......
......@@ -196,7 +196,6 @@
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#endif /* __ARISTAINETOS_COMMON_CONFIG_H */
......@@ -45,9 +45,6 @@
#define CONFIG_LG4573_BUS 0
#define CONFIG_LG4573_CS 0
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#include "aristainetos-common.h"
#endif /* __ARISTAINETOS2_CONFIG_H */
......@@ -45,9 +45,6 @@
#define CONFIG_LG4573_BUS 0
#define CONFIG_LG4573_CS 1
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#include "aristainetos-common.h"
#endif /* __ARISTAINETOS2B_CONFIG_H */
......@@ -198,7 +198,6 @@
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_CMD_BMP
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#define CONFIG_PCI
......
......@@ -211,7 +211,6 @@
#define CONFIG_BCH
/* Backlight Control */
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66666000
#endif /* __CONFIG_H */
......@@ -83,7 +83,6 @@
#define CONFIG_IMX_THERMAL
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
......
......@@ -1459,7 +1459,6 @@ CONFIG_PROOF_POINTS
CONFIG_PRPMC_PCI_ALIAS
CONFIG_PSRAM_SCFG
CONFIG_PWM
CONFIG_PWM_IMX
CONFIG_PXA_LCD
CONFIG_PXA_MMC_GENERIC
CONFIG_PXA_PWR_I2C
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment