Commit fac96408 authored by trem's avatar trem Committed by Heiko Schocher

i2c: mxc: move to new subsystem

Signed-off-by: default avatarPhilippe Reynes <tremyfr@yahoo.fr>
parent 815a76f2
......@@ -2003,6 +2003,17 @@ CBFS (Coreboot Filesystem) support
- CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0
- CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1
- drivers/i2c/i2c_mxc.c
- activate this driver with CONFIG_SYS_I2C_MXC
- define speed for bus 1 with CONFIG_SYS_MXC_I2C1_SPEED
- define slave for bus 1 with CONFIG_SYS_MXC_I2C1_SLAVE
- define speed for bus 2 with CONFIG_SYS_MXC_I2C2_SPEED
- define slave for bus 2 with CONFIG_SYS_MXC_I2C2_SLAVE
- define speed for bus 3 with CONFIG_SYS_MXC_I2C3_SPEED
- define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE
If thoses defines are not set, default value is 100000
for speed, and 0 for slave.
additional defines:
CONFIG_SYS_NUM_I2C_BUSES
......
......@@ -94,7 +94,7 @@ void enable_usboh3_clk(bool enable)
MXC_CCM_CCGR2_USBOH3_60M(cg));
}
#ifdef CONFIG_I2C_MXC
#ifdef CONFIG_SYS_I2C_MXC
/* i2c_num can be from 0, to 1 for i.MX51 and 2 for i.MX53 */
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
......
......@@ -48,7 +48,7 @@ void enable_usboh3_clk(unsigned char enable)
}
#ifdef CONFIG_I2C_MXC
#ifdef CONFIG_SYS_I2C_MXC
/* i2c_num can be from 0 - 2 */
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
......
......@@ -16,7 +16,7 @@ COBJS-y = iomux-v3.o
endif
ifeq ($(SOC),$(filter $(SOC),mx5 mx6))
COBJS-y += timer.o cpu.o speed.o
COBJS-$(CONFIG_I2C_MXC) += i2c-mxv7.o
COBJS-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
endif
ifeq ($(SOC),$(filter $(SOC),mx6 mxs))
COBJS-y += misc.o
......
......@@ -14,7 +14,6 @@ COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
COBJS-$(CONFIG_DW_I2C) += designware_i2c.o
COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
COBJS-$(CONFIG_I2C_MXS) += mxs_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
......@@ -28,6 +27,7 @@ COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
COBJS-$(CONFIG_SYS_I2C) += i2c_core.o
COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
COBJS-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
COBJS-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
COBJS-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
COBJS-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
......
......@@ -102,6 +102,28 @@ static u16 i2c_clk_div[50][2] = {
};
#endif
#ifndef CONFIG_SYS_MXC_I2C1_SPEED
#define CONFIG_SYS_MXC_I2C1_SPEED 100000
#endif
#ifndef CONFIG_SYS_MXC_I2C2_SPEED
#define CONFIG_SYS_MXC_I2C2_SPEED 100000
#endif
#ifndef CONFIG_SYS_MXC_I2C3_SPEED
#define CONFIG_SYS_MXC_I2C3_SPEED 100000
#endif
#ifndef CONFIG_SYS_MXC_I2C1_SLAVE
#define CONFIG_SYS_MXC_I2C1_SLAVE 0
#endif
#ifndef CONFIG_SYS_MXC_I2C2_SLAVE
#define CONFIG_SYS_MXC_I2C2_SLAVE 0
#endif
#ifndef CONFIG_SYS_MXC_I2C3_SLAVE
#define CONFIG_SYS_MXC_I2C3_SLAVE 0
#endif
/*
* Calculate and set proper clock divider
*/
......@@ -153,21 +175,6 @@ static int bus_i2c_set_bus_speed(void *base, int speed)
return 0;
}
/*
* Get I2C Speed
*/
static unsigned int bus_i2c_get_bus_speed(void *base)
{
struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
u8 clk_idx = readb(&i2c_regs->ifdr);
u8 clk_div;
for (clk_div = 0; i2c_clk_div[clk_div][1] != clk_idx; clk_div++)
;
return mxc_get_clock(MXC_I2C_CLK) / i2c_clk_div[clk_div][0];
}
#define ST_BUS_IDLE (0 | (I2SR_IBB << 8))
#define ST_BUS_BUSY (I2SR_IBB | (I2SR_IBB << 8))
#define ST_IIF (I2SR_IIF | (I2SR_IIF << 8))
......@@ -410,20 +417,30 @@ struct sram_data {
*/
static struct sram_data __attribute__((section(".data"))) srdata;
void *get_base(void)
{
#ifdef CONFIG_SYS_I2C_BASE
#ifdef CONFIG_I2C_MULTI_BUS
void *ret = srdata.i2c_data[srdata.curr_i2c_bus].base;
if (ret)
return ret;
#endif
return (void *)CONFIG_SYS_I2C_BASE;
#elif defined(CONFIG_I2C_MULTI_BUS)
return srdata.i2c_data[srdata.curr_i2c_bus].base;
static void * const i2c_bases[] = {
#if defined(CONFIG_MX25)
(void *)IMX_I2C_BASE,
(void *)IMX_I2C2_BASE,
(void *)IMX_I2C3_BASE
#elif defined(CONFIG_MX27)
(void *)IMX_I2C1_BASE,
(void *)IMX_I2C2_BASE
#elif defined(CONFIG_MX31) || defined(CONFIG_MX35) || \
defined(CONFIG_MX51) || defined(CONFIG_MX53) || \
defined(CONFIG_MX6)
(void *)I2C1_BASE_ADDR,
(void *)I2C2_BASE_ADDR,
(void *)I2C3_BASE_ADDR
#elif defined(CONFIG_VF610)
(void *)I2C0_BASE_ADDR
#else
return srdata.i2c_data[0].base;
#error "architecture not supported"
#endif
};
void *i2c_get_base(struct i2c_adapter *adap)
{
return i2c_bases[adap->hwadapnr];
}
static struct i2c_parms *i2c_get_parms(void *base)
......@@ -448,39 +465,26 @@ static int i2c_idle_bus(void *base)
return 0;
}
#ifdef CONFIG_I2C_MULTI_BUS
unsigned int i2c_get_bus_num(void)
{
return srdata.curr_i2c_bus;
}
int i2c_set_bus_num(unsigned bus_idx)
{
if (bus_idx >= ARRAY_SIZE(srdata.i2c_data))
return -1;
if (!srdata.i2c_data[bus_idx].base)
return -1;
srdata.curr_i2c_bus = bus_idx;
return 0;
}
#endif
int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
static int mxc_i2c_read(struct i2c_adapter *adap, uint8_t chip,
uint addr, int alen, uint8_t *buffer,
int len)
{
return bus_i2c_read(get_base(), chip, addr, alen, buf, len);
return bus_i2c_read(i2c_get_base(adap), chip, addr, alen, buffer, len);
}
int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
static int mxc_i2c_write(struct i2c_adapter *adap, uint8_t chip,
uint addr, int alen, uint8_t *buffer,
int len)
{
return bus_i2c_write(get_base(), chip, addr, alen, buf, len);
return bus_i2c_write(i2c_get_base(adap), chip, addr, alen, buffer, len);
}
/*
* Test if a chip at a given address responds (probe the chip)
*/
int i2c_probe(uchar chip)
static int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
{
return bus_i2c_write(get_base(), chip, 0, 0, NULL, 0);
return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0);
}
void bus_i2c_init(void *base, int speed, int unused,
......@@ -510,23 +514,38 @@ void bus_i2c_init(void *base, int speed, int unused,
/*
* Init I2C Bus
*/
void i2c_init(int speed, int unused)
static void mxc_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
{
bus_i2c_init(get_base(), speed, unused, NULL, NULL);
bus_i2c_init(i2c_get_base(adap), speed, slaveaddr, NULL, NULL);
}
/*
* Set I2C Speed
*/
int i2c_set_bus_speed(unsigned int speed)
static uint mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
{
return bus_i2c_set_bus_speed(get_base(), speed);
return bus_i2c_set_bus_speed(i2c_get_base(adap), speed);
}
/*
* Get I2C Speed
* Register mxc i2c adapters
*/
unsigned int i2c_get_bus_speed(void)
{
return bus_i2c_get_bus_speed(get_base());
}
U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe,
mxc_i2c_read, mxc_i2c_write,
mxc_i2c_set_bus_speed,
CONFIG_SYS_MXC_I2C1_SPEED,
CONFIG_SYS_MXC_I2C1_SLAVE, 0)
U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe,
mxc_i2c_read, mxc_i2c_write,
mxc_i2c_set_bus_speed,
CONFIG_SYS_MXC_I2C2_SPEED,
CONFIG_SYS_MXC_I2C2_SLAVE, 1)
#if defined(CONFIG_MX31) || defined(CONFIG_MX35) ||\
defined(CONFIG_MX51) || defined(CONFIG_MX53) ||\
defined(CONFIG_MX6)
U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
mxc_i2c_read, mxc_i2c_write,
mxc_i2c_set_bus_speed,
CONFIG_SYS_MXC_I2C3_SPEED,
CONFIG_SYS_MXC_I2C3_SLAVE, 2)
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment