1. 04 Dec, 2019 1 commit
  2. 25 Nov, 2019 1 commit
  3. 20 Nov, 2019 2 commits
    • Tom Rini's avatar
      env: Finish migration of common ENV options · a09fea1d
      Tom Rini authored
      - In ARMv8 NXP Layerscape platforms we also need to make use of
        CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
      - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
        to 0.
      - Add Kconfig entry for ENV_ADDR.
      - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
      - Add ENV_xxx_REDUND options that depend on their primary option and
        SYS_REDUNDAND_ENVIRONMENT
      - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
        for the pre-main-U-Boot environment location.
      - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
        rather it being non-zero, as it will now be zero by default.
      - Rework the env_offset absolute in env/embedded.o to not use
        CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
        ENV_IS_IN_FLASH.
      - Migrate all platforms.
      
      Cc: Wolfgang Denk <wd@denx.de>
      Cc: Joe Hershberger <joe.hershberger@ni.com>
      Cc: Patrick Delaunay <patrick.delaunay@st.com>
      Cc: uboot-stm32@st-md-mailman.stormreply.com
      Signed-off-by: Tom Rini's avatarTom Rini <trini@konsulko.com>
      Acked-by: Joe Hershberger's avatarJoe Hershberger <joe.hershberger@ni.com>
      Reviewed-by: default avatarSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
      a09fea1d
    • Tom Rini's avatar
      env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol · 8d8ee47e
      Tom Rini authored
      Today in initr_reloc_global_data() we use some non-obvious tests to
      determine if we need to relocate the env_addr within gd or not.  In
      order to facilitate migration of other symbols to Kconfig we need to
      introduce a new symbol for this particular use case.
      
      Cc: Wolfgang Denk <wd@denx.de>
      Cc: Joe Hershberger <joe.hershberger@ni.com>
      Signed-off-by: Tom Rini's avatarTom Rini <trini@konsulko.com>
      8d8ee47e
  4. 23 Sep, 2019 1 commit
  5. 28 Aug, 2019 1 commit
  6. 26 Aug, 2019 1 commit
  7. 14 Jun, 2019 2 commits
  8. 30 Apr, 2019 1 commit
  9. 25 Mar, 2019 1 commit
  10. 19 Oct, 2018 1 commit
  11. 17 Aug, 2018 2 commits
  12. 10 Jul, 2018 1 commit
  13. 04 Jun, 2018 1 commit
  14. 15 May, 2018 1 commit
  15. 27 Apr, 2018 1 commit
    • Adam Ford's avatar
      Convert CONFIG_SPI to Kconfig · f1b1f770
      Adam Ford authored
      This converts the following to Kconfig:
         CONFIG_SPI
      
      This partly involves updating code that assumes that CONFIG_SPI implies
      things that are specific to the MPC8xx SPI driver.  For now, just update
      the CONFIG tests.  This also involves reworking the default for
      CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
      reasonable default, as it does not cause any compile failures.
      Signed-off-by: default avatarAdam Ford <aford173@gmail.com>
      Signed-off-by: Tom Rini's avatarTom Rini <trini@konsulko.com>
      f1b1f770
  16. 08 Apr, 2018 4 commits
  17. 24 Feb, 2018 1 commit
  18. 14 Feb, 2018 1 commit
    • Tom Rini's avatar
      configs: Migrate CONFIG_SPL_FRAMEWORK · 75670c81
      Tom Rini authored
      Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the
      current set of options we have in Kconfig.  We will need to have some
      options available for SPL and !SPL_FRAMEWORK so this is important.  In a
      few cases we re-order existing options so that we have less escapes from
      the SPL_FRAMEWORK guard.
      Signed-off-by: Tom Rini's avatarTom Rini <trini@konsulko.com>
      75670c81
  19. 11 Feb, 2018 1 commit
    • Tom Rini's avatar
      configs: Migrate CONFIG_SYS_TEXT_BASE · 278b90ce
      Tom Rini authored
      On the NIOS2 and Xtensa architectures, we do not have
      CONFIG_SYS_TEXT_BASE set.  This is a strict migration of the current
      values into the defconfig and removing them from the headers.
      
      I did not attempt to add more default values in and for now will leave
      that to maintainers.
      Signed-off-by: Tom Rini's avatarTom Rini <trini@konsulko.com>
      278b90ce
  20. 10 Oct, 2017 1 commit
    • Tuomas Tynkkynen's avatar
      cmd: Toggle the default value of CONFIG_CMD_IMLS · ad12dc18
      Tuomas Tynkkynen authored
      Having this as a 'default y' is rather annoying because it doesn't
      actually compile unless other options are defined in the board header:
      
      ../cmd/bootm.c: In function 'do_imls_nor':
      ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
         i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
      
      Make it 'default n' so people who develop new boards that start from a
      blank defconfig have one less compilation failure to debug.
      Signed-off-by: default avatarTuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
      ad12dc18
  21. 28 Aug, 2017 1 commit
  22. 15 Aug, 2017 1 commit
  23. 13 Aug, 2017 1 commit
    • Philipp Tomsich's avatar
      configs: mpc85xx: fix fallout from SPL/TPL changes · b65236ae
      Philipp Tomsich authored
      Splitting the feature selection for SPL and TPL, caused a few build
      failures to mpx85xx boards.  This fixes the fallout by adding the
      needed new option names to the respective defconfig files.
      
      Signed-off-byL Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
      b65236ae
  24. 12 Aug, 2017 1 commit
  25. 08 Aug, 2017 1 commit
  26. 07 Aug, 2017 1 commit
  27. 26 Jul, 2017 1 commit
    • Simon Glass's avatar
      Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig · 2be29653
      Simon Glass authored
      This converts the following to Kconfig:
         CONFIG_ENV_IS_IN_MMC
         CONFIG_ENV_IS_IN_NAND
         CONFIG_ENV_IS_IN_UBI
         CONFIG_ENV_IS_NOWHERE
      
      In fact this already exists for sunxi as a 'choice' config. However not
      all the choices are available in Kconfig yet so we cannot use that. It
      would lead to more than one option being set.
      
      In addition, one purpose of this series is to allow the environment to be
      stored in more than one place. So the existing choice is converted to a
      normal config allowing each option to be set independently.
      
      There are not many opportunities for Kconfig updates to reduce the size of
      this patch. This was tested with
      
         ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC
      
      And then manual updates.  This is because for CHAIN_OF_TRUST boards they
      can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
      now.
      Signed-off-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
      Signed-off-by: Tom Rini's avatarTom Rini <trini@konsulko.com>
      2be29653
  28. 22 May, 2017 2 commits
  29. 01 May, 2017 2 commits
  30. 13 Mar, 2017 1 commit
  31. 12 Feb, 2017 1 commit
    • Masahiro Yamada's avatar
      flash: complete CONFIG_SYS_NO_FLASH move with renaming · e856bdcf
      Masahiro Yamada authored
      We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
      not completed. Finish this work by the tool.
      
      During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
      Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
      than those of "#ifdef CONFIG_SYS_NO_FLASH".  Flipping the logic will
      make the code more readable.  Besides, negative meaning symbols do
      not fit in obj-$(CONFIG_...) style Makefiles.
      
      This commit was created as follows:
      
      [1] Edit "default n" to "default y" in the config entry in
          common/Kconfig.
      
      [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"
      
      [3] Rename the instances in defconfigs by the following:
        find . -path './configs/*_defconfig' | xargs sed -i \
        -e '/CONFIG_SYS_NO_FLASH=y/d' \
        -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'
      
      [4] Change the conditionals by the following:
        find . -name '*.[ch]' | xargs sed -i \
        -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
        -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
        -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
        -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'
      
      [5] Modify the following manually
        - Rename the rest of instances
        - Remove the description from README
        - Create the new Kconfig entry in drivers/mtd/Kconfig
        - Remove the old Kconfig entry from common/Kconfig
        - Remove the garbage comments from include/configs/*.h
      Signed-off-by: Masahiro Yamada's avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      e856bdcf
  32. 25 Jan, 2017 1 commit