Commit fe48d4f9 authored by Shivamurthy Shastri's avatar Shivamurthy Shastri Committed by Jagan Teki

mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies

Add device table for new Micron SPI NAND devices, which have multiple
dies.

Also, enable support to select the dies.
Signed-off-by: default avatarShivamurthy Shastri <sshivamurthy@micron.com>
Acked-by: Jagan Teki's avatarJagan Teki <jagan@amarulasolutions.com>
parent 1f4836b0
......@@ -24,6 +24,14 @@
#define MICRON_CFG_CR BIT(0)
/*
* As per datasheet, die selection is done by the 6th bit of Die
* Select Register (Address 0xD0).
*/
#define MICRON_DIE_SELECT_REG 0xD0
#define MICRON_SELECT_DIE(x) ((x) << 6)
static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
......@@ -70,6 +78,20 @@ static const struct mtd_ooblayout_ops micron_8_ooblayout = {
.rfree = micron_8_ooblayout_free,
};
static int micron_select_target(struct spinand_device *spinand,
unsigned int target)
{
struct spi_mem_op op = SPINAND_SET_FEATURE_OP(MICRON_DIE_SELECT_REG,
spinand->scratchbuf);
if (target > 1)
return -EINVAL;
*spinand->scratchbuf = MICRON_SELECT_DIE(target);
return spi_mem_exec_op(spinand->slave, &op);
}
static int micron_8_ecc_get_status(struct spinand_device *spinand,
u8 status)
{
......@@ -137,6 +159,17 @@ static const struct spinand_info micron_spinand_table[] = {
0,
SPINAND_ECCINFO(&micron_8_ooblayout,
micron_8_ecc_get_status)),
/* M79A 4Gb 3.3V */
SPINAND_INFO("MT29F4G01ADAGD", 0x36,
NAND_MEMORG(1, 2048, 128, 64, 2048, 2, 1, 2),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
&update_cache_variants),
0,
SPINAND_ECCINFO(&micron_8_ooblayout,
micron_8_ecc_get_status),
SPINAND_SELECT_TARGET(micron_select_target)),
/* M70A 4Gb 3.3V */
SPINAND_INFO("MT29F4G01ABAFD", 0x34,
NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
......@@ -157,6 +190,28 @@ static const struct spinand_info micron_spinand_table[] = {
SPINAND_HAS_CR_FEAT_BIT,
SPINAND_ECCINFO(&micron_8_ooblayout,
micron_8_ecc_get_status)),
/* M70A 8Gb 3.3V */
SPINAND_INFO("MT29F8G01ADAFD", 0x46,
NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 2),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
&update_cache_variants),
SPINAND_HAS_CR_FEAT_BIT,
SPINAND_ECCINFO(&micron_8_ooblayout,
micron_8_ecc_get_status),
SPINAND_SELECT_TARGET(micron_select_target)),
/* M70A 8Gb 1.8V */
SPINAND_INFO("MT29F8G01ADBFD", 0x47,
NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 2),
NAND_ECCREQ(8, 512),
SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
&write_cache_variants,
&update_cache_variants),
SPINAND_HAS_CR_FEAT_BIT,
SPINAND_ECCINFO(&micron_8_ooblayout,
micron_8_ecc_get_status),
SPINAND_SELECT_TARGET(micron_select_target)),
};
static int micron_spinand_detect(struct spinand_device *spinand)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment