Commit 048447ce authored by Olliver Schinagl's avatar Olliver Schinagl Committed by Jagan Teki

power: axp209: Use BIT() macro

Use the standard BIT() macro for bitfield definitions in headers.
Signed-off-by: default avatarOlliver Schinagl <oliver@schinagl.nl>
Signed-off-by: default avatarPriit Laes <plaes@plaes.org>
Acked-by: Maxime Ripard's avatarMaxime Ripard <maxime.ripard@bootlin.com>
parent c970e895
......@@ -3,6 +3,8 @@
* (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
*/
#include <linux/bitops.h>
enum axp209_reg {
AXP209_POWER_STATUS = 0x00,
AXP209_CHIP_VERSION = 0x03,
......@@ -20,29 +22,29 @@ enum axp209_reg {
AXP209_SHUTDOWN = 0x32,
};
#define AXP209_POWER_STATUS_ON_BY_DC (1 << 0)
#define AXP209_POWER_STATUS_VBUS_USABLE (1 << 4)
#define AXP209_POWER_STATUS_ON_BY_DC BIT(0)
#define AXP209_POWER_STATUS_VBUS_USABLE BIT(4)
#define AXP209_OUTPUT_CTRL_EXTEN (1 << 0)
#define AXP209_OUTPUT_CTRL_DCDC3 (1 << 1)
#define AXP209_OUTPUT_CTRL_LDO2 (1 << 2)
#define AXP209_OUTPUT_CTRL_LDO4 (1 << 3)
#define AXP209_OUTPUT_CTRL_DCDC2 (1 << 4)
#define AXP209_OUTPUT_CTRL_LDO3 (1 << 6)
#define AXP209_OUTPUT_CTRL_EXTEN BIT(0)
#define AXP209_OUTPUT_CTRL_DCDC3 BIT(1)
#define AXP209_OUTPUT_CTRL_LDO2 BIT(2)
#define AXP209_OUTPUT_CTRL_LDO4 BIT(3)
#define AXP209_OUTPUT_CTRL_DCDC2 BIT(4)
#define AXP209_OUTPUT_CTRL_LDO3 BIT(6)
#define AXP209_IRQ5_PEK_UP (1 << 6)
#define AXP209_IRQ5_PEK_DOWN (1 << 5)
#define AXP209_IRQ5_PEK_UP BIT(6)
#define AXP209_IRQ5_PEK_DOWN BIT(5)
#define AXP209_POWEROFF (1 << 7)
#define AXP209_POWEROFF BIT(7)
/* For axp_gpio.c */
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
#define AXP_POWER_STATUS_VBUS_PRESENT BIT(5)
#define AXP_GPIO0_CTRL 0x90
#define AXP_GPIO1_CTRL 0x92
#define AXP_GPIO2_CTRL 0x93
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x94
#define AXP_GPIO_STATE_OFFSET 4
#define AXP_GPIO_STATE_OFFSET 4
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment