Commit 0d319341 authored by Jagan Teki's avatar Jagan Teki Committed by Philipp Tomsich

ARM: dts: rockchip: Add gmac support for rk3288-vyasa board

Sync gmac dts node from Linux.
Signed-off-by: Jagan Teki's avatarJagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich's avatarPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Jagan Teki's avatarJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Philipp Tomsich's avatarPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
parent ad6c9655
......@@ -104,12 +104,35 @@
regulator-boot-on;
vin-supply = <&dc12_vbat>;
};
ext_gmac: external-gmac-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
clock-output-names = "ext_gmac";
};
};
&cpu0 {
cpu0-supply = <&vdd_cpu>;
};
&gmac {
assigned-clocks = <&cru SCLK_MAC>;
assigned-clock-parents = <&ext_gmac>;
clock_in_out = "input";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
......@@ -355,6 +378,24 @@
};
&pinctrl {
pcfg_output_high: pcfg-output-high {
output-high;
};
gmac {
phy_int: phy-int {
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_pmeb: phy-pmeb {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rst: phy-rst {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
pmic {
pmic_int: pmic-int {
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment