Commit 46787734 authored by Manivannan Sadhasivam's avatar Manivannan Sadhasivam Committed by Philipp Tomsich

rockchip: rk3399: Add Ficus EE board support

Add board support for Ficus EE board from Vamrs. This board utilizes
common Rock960 family support.

Following peripherals are tested and known to work:
* Gigabit Ethernet
* USB 2.0
* MMC
Signed-off-by: 's avatarEzequiel Garcia <ezequiel@collabora.com>
[Reworked based on common Rock960 family support]
Signed-off-by: 's avatarManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Simon Glass's avatarSimon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich's avatarPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
parent 07f76878
......@@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-veyron-minnie.dtb \
rk3288-vyasa.dtb \
rk3328-evb.dtb \
rk3399-ficus.dtb \
rk3368-lion.dtb \
rk3368-sheep.dtb \
rk3368-geekbox.dtb \
......
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Collabora Ltd.
* Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
*
* Schematics available at https://dl.vamrs.com/products/ficus/docs/hw
*/
/dts-v1/;
#include "rk3399-rock960.dtsi"
#include "rk3399-sdram-ddr3-1600.dtsi"
/ {
model = "96boards RK3399 Ficus";
compatible = "vamrs,ficus", "rockchip,rk3399";
chosen {
stdout-path = "serial2:1500000n8";
};
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
};
&gmac {
assigned-clocks = <&cru SCLK_RMII_SRC>;
assigned-clock-parents = <&clkin_gmac>;
clock_in_out = "input";
phy-supply = <&vcc3v3_sys>;
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
};
&pcie0 {
ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
};
&pinctrl {
gmac {
rgmii_sleep_pins: rgmii-sleep-pins {
rockchip,pins =
<3 15 RK_FUNC_GPIO &pcfg_output_low>;
};
};
pcie {
pcie_drv: pcie-drv {
rockchip,pins =
<1 24 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb2 {
host_vbus_drv: host-vbus-drv {
rockchip,pins =
<4 27 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&vcc3v3_pcie {
gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
};
&vcc5v0_host {
gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
};
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_ROCKCHIP_RK3399=y
CONFIG_TARGET_ROCK960_RK3399=y
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3399-ficus"
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_SPL_ATF=y
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_GMAC_ROCKCHIP=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_ROCKCHIP_RK3399=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_USE_TINY_PRINTF=y
CONFIG_ERRNO_STR=y
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment