Commit 6f796a9b authored by Icenowy Zheng's avatar Icenowy Zheng Committed by Jagan Teki

sunxi: add support for Allwinner H6 SoC

Allwinner H6 is a new SoC from Allwinner features USB3 and PCIe
interfaces.

This patch adds support for it.

The corresponding DTSI file, from Linux next-20180720, is also
introduced.
Signed-off-by: default avatarIcenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard's avatarMaxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: default avatarJagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki's avatarJagan Teki <jagan@amarulasolutions.com>
parent da261654
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
/*
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h6-ccu.h>
#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
#include <dt-bindings/reset/sun50i-h6-ccu.h>
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0>;
enable-method = "psci";
};
cpu1: cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <1>;
enable-method = "psci";
};
cpu2: cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <2>;
enable-method = "psci";
};
cpu3: cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <3>;
enable-method = "psci";
};
};
iosc: internal-osc-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <16000000>;
clock-accuracy = <300000000>;
clock-output-names = "iosc";
};
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
clocks = <&osc24M>, <&osc32k>, <&iosc>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
};
gic: interrupt-controller@3021000 {
compatible = "arm,gic-400";
reg = <0x03021000 0x1000>,
<0x03022000 0x2000>,
<0x03024000 0x2000>,
<0x03026000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-controller;
#interrupt-cells = <3>;
};
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
bias-pull-up;
};
mmc2_pins: mmc2-pins {
pins = "PC1", "PC4", "PC5", "PC6",
"PC7", "PC8", "PC9", "PC10",
"PC11", "PC12", "PC13", "PC14";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
uart0_ph_pins: uart0-ph {
pins = "PH0", "PH1";
function = "uart0";
};
};
mmc0: mmc@4020000 {
compatible = "allwinner,sun50i-h6-mmc",
"allwinner,sun50i-a64-mmc";
reg = <0x04020000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@4021000 {
compatible = "allwinner,sun50i-h6-mmc",
"allwinner,sun50i-a64-mmc";
reg = <0x04021000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@4022000 {
compatible = "allwinner,sun50i-h6-emmc",
"allwinner,sun50i-a64-emmc";
reg = <0x04022000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
uart0: serial@5000000 {
compatible = "snps,dw-apb-uart";
reg = <0x05000000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
uart1: serial@5000400 {
compatible = "snps,dw-apb-uart";
reg = <0x05000400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
uart2: serial@5000800 {
compatible = "snps,dw-apb-uart";
reg = <0x05000800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
uart3: serial@5000c00 {
compatible = "snps,dw-apb-uart";
reg = <0x05000c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h6-r-ccu";
reg = <0x07010000 0x400>;
clocks = <&osc24M>, <&osc32k>, <&iosc>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
};
r_intc: interrupt-controller@7021000 {
compatible = "allwinner,sun50i-h6-r-intc",
"allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x07021000 0x400>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
};
r_pio: pinctrl@7022000 {
compatible = "allwinner,sun50i-h6-r-pinctrl";
reg = <0x07022000 0x400>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
r_i2c_pins: r-i2c {
pins = "PL0", "PL1";
function = "s_i2c";
};
};
r_i2c: i2c@7081400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07081400 0x400>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB2_I2C>;
resets = <&r_ccu RST_R_APB2_I2C>;
pinctrl-names = "default";
pinctrl-0 = <&r_i2c_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
};
......@@ -82,6 +82,7 @@ config SUN8I_RSB
config SUNXI_SRAM_ADDRESS
hex
default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5
default 0x20000 if MACH_SUN50I_H6
default 0x0
---help---
Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
......@@ -287,6 +288,14 @@ config MACH_SUN50I_H5
select FIT
select SPL_LOAD_FIT
config MACH_SUN50I_H6
bool "sun50i (Allwinner H6)"
select ARM64
select SUPPORT_SPL
select FIT
select SPL_LOAD_FIT
select DRAM_SUN50I_H6
endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
......@@ -380,6 +389,7 @@ config DRAM_CLK
default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || \
MACH_SUN8I_V3S
default 672 if MACH_SUN50I
default 744 if MACH_SUN50I_H6
---help---
Set the dram clock speed, valid range 240 - 480 (prior to sun9i),
must be a multiple of 24. For the sun9i (A80), the tested values
......@@ -399,7 +409,7 @@ config DRAM_ZQ
default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
default 127 if MACH_SUN7I
default 14779 if MACH_SUN8I_V3S
default 3881979 if MACH_SUN8I_R40
default 3881979 if MACH_SUN8I_R40 || MACH_SUN50I_H6
default 4145117 if MACH_SUN9I
default 3881915 if MACH_SUN50I
---help---
......@@ -411,6 +421,7 @@ config DRAM_ODT_EN
default y if MACH_SUN8I_A23
default y if MACH_SUN8I_R40
default y if MACH_SUN50I
default y if MACH_SUN50I_H6
---help---
Select this to enable dram odt (on die termination).
......@@ -501,6 +512,7 @@ config SYS_CLK_FREQ
default 816000000 if MACH_SUN50I || MACH_SUN50I_H5
default 1008000000 if MACH_SUN8I
default 1008000000 if MACH_SUN9I
default 888000000 if MACH_SUN50I_H6
config SYS_CONFIG_NAME
default "sun4i" if MACH_SUN4I
......@@ -510,6 +522,7 @@ config SYS_CONFIG_NAME
default "sun8i" if MACH_SUN8I
default "sun9i" if MACH_SUN9I
default "sun50i" if MACH_SUN50I
default "sun50i" if MACH_SUN50I_H6
config SYS_BOARD
default "sunxi"
......@@ -715,6 +728,7 @@ config VIDEO_SUNXI
depends on !MACH_SUN8I_V3S
depends on !MACH_SUN9I
depends on !MACH_SUN50I
depends on !MACH_SUN50I_H6
select VIDEO
imply VIDEO_DT_SIMPLEFB
default y
......@@ -947,6 +961,7 @@ config SPL_STACK_R_ADDR
default 0x4fe00000 if MACH_SUN8I
default 0x2fe00000 if MACH_SUN9I
default 0x4fe00000 if MACH_SUN50I
default 0x4fe00000 if MACH_SUN50I_H6
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"
......
......@@ -96,6 +96,8 @@ int print_cpuinfo(void)
puts("CPU: Allwinner A64 (SUN50I)\n");
#elif defined CONFIG_MACH_SUN50I_H5
puts("CPU: Allwinner H5 (SUN50I)\n");
#elif defined CONFIG_MACH_SUN50I_H6
puts("CPU: Allwinner H6 (SUN50I)\n");
#else
#warning Please update cpu_info.c with correct CPU information
puts("CPU: SUNXI Family\n");
......
......@@ -256,7 +256,7 @@ config SPL_SHA256_SUPPORT
config SPL_FIT_IMAGE_TINY
bool "Remove functionality from SPL FIT loading to reduce size"
depends on SPL_FIT
default y if MACH_SUN50I || MACH_SUN50I_H5
default y if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6
help
Enable this to reduce the size of the FIT image loading code
in SPL, if space for the SPL binary is very tight.
......
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
/*
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
*/
#ifndef _DT_BINDINGS_CLK_SUN50I_H6_H_
#define _DT_BINDINGS_CLK_SUN50I_H6_H_
#define CLK_PLL_PERIPH0 3
#define CLK_CPUX 21
#define CLK_APB1 26
#define CLK_DE 29
#define CLK_BUS_DE 30
#define CLK_DEINTERLACE 31
#define CLK_BUS_DEINTERLACE 32
#define CLK_GPU 33
#define CLK_BUS_GPU 34
#define CLK_CE 35
#define CLK_BUS_CE 36
#define CLK_VE 37
#define CLK_BUS_VE 38
#define CLK_EMCE 39
#define CLK_BUS_EMCE 40
#define CLK_VP9 41
#define CLK_BUS_VP9 42
#define CLK_BUS_DMA 43
#define CLK_BUS_MSGBOX 44
#define CLK_BUS_SPINLOCK 45
#define CLK_BUS_HSTIMER 46
#define CLK_AVS 47
#define CLK_BUS_DBG 48
#define CLK_BUS_PSI 49
#define CLK_BUS_PWM 50
#define CLK_BUS_IOMMU 51
#define CLK_MBUS_DMA 53
#define CLK_MBUS_VE 54
#define CLK_MBUS_CE 55
#define CLK_MBUS_TS 56
#define CLK_MBUS_NAND 57
#define CLK_MBUS_CSI 58
#define CLK_MBUS_DEINTERLACE 59
#define CLK_NAND0 61
#define CLK_NAND1 62
#define CLK_BUS_NAND 63
#define CLK_MMC0 64
#define CLK_MMC1 65
#define CLK_MMC2 66
#define CLK_BUS_MMC0 67
#define CLK_BUS_MMC1 68
#define CLK_BUS_MMC2 69
#define CLK_BUS_UART0 70
#define CLK_BUS_UART1 71
#define CLK_BUS_UART2 72
#define CLK_BUS_UART3 73
#define CLK_BUS_I2C0 74
#define CLK_BUS_I2C1 75
#define CLK_BUS_I2C2 76
#define CLK_BUS_I2C3 77
#define CLK_BUS_SCR0 78
#define CLK_BUS_SCR1 79
#define CLK_SPI0 80
#define CLK_SPI1 81
#define CLK_BUS_SPI0 82
#define CLK_BUS_SPI1 83
#define CLK_BUS_EMAC 84
#define CLK_TS 85
#define CLK_BUS_TS 86
#define CLK_IR_TX 87
#define CLK_BUS_IR_TX 88
#define CLK_BUS_THS 89
#define CLK_I2S3 90
#define CLK_I2S0 91
#define CLK_I2S1 92
#define CLK_I2S2 93
#define CLK_BUS_I2S0 94
#define CLK_BUS_I2S1 95
#define CLK_BUS_I2S2 96
#define CLK_BUS_I2S3 97
#define CLK_SPDIF 98
#define CLK_BUS_SPDIF 99
#define CLK_DMIC 100
#define CLK_BUS_DMIC 101
#define CLK_AUDIO_HUB 102
#define CLK_BUS_AUDIO_HUB 103
#define CLK_USB_OHCI0 104
#define CLK_USB_PHY0 105
#define CLK_USB_PHY1 106
#define CLK_USB_OHCI3 107
#define CLK_USB_PHY3 108
#define CLK_USB_HSIC_12M 109
#define CLK_USB_HSIC 110
#define CLK_BUS_OHCI0 111
#define CLK_BUS_OHCI3 112
#define CLK_BUS_EHCI0 113
#define CLK_BUS_XHCI 114
#define CLK_BUS_EHCI3 115
#define CLK_BUS_OTG 116
#define CLK_PCIE_REF_100M 117
#define CLK_PCIE_REF 118
#define CLK_PCIE_REF_OUT 119
#define CLK_PCIE_MAXI 120
#define CLK_PCIE_AUX 121
#define CLK_BUS_PCIE 122
#define CLK_HDMI 123
#define CLK_HDMI_SLOW 124
#define CLK_HDMI_CEC 125
#define CLK_BUS_HDMI 126
#define CLK_BUS_TCON_TOP 127
#define CLK_TCON_LCD0 128
#define CLK_BUS_TCON_LCD0 129
#define CLK_TCON_TV0 130
#define CLK_BUS_TCON_TV0 131
#define CLK_CSI_CCI 132
#define CLK_CSI_TOP 133
#define CLK_CSI_MCLK 134
#define CLK_BUS_CSI 135
#define CLK_HDCP 136
#define CLK_BUS_HDCP 137
#endif /* _DT_BINDINGS_CLK_SUN50I_H6_H_ */
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
*/
#ifndef _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_
#define _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_
#define CLK_AR100 0
#define CLK_R_APB1 2
#define CLK_R_APB1_TIMER 4
#define CLK_R_APB1_TWD 5
#define CLK_R_APB1_PWM 6
#define CLK_R_APB2_UART 7
#define CLK_R_APB2_I2C 8
#define CLK_R_APB1_IR 9
#define CLK_R_APB1_W1 10
#define CLK_IR 11
#define CLK_W1 12
#endif /* _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_ */
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
/*
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
*/
#ifndef _DT_BINDINGS_RESET_SUN50I_H6_H_
#define _DT_BINDINGS_RESET_SUN50I_H6_H_
#define RST_MBUS 0
#define RST_BUS_DE 1
#define RST_BUS_DEINTERLACE 2
#define RST_BUS_GPU 3
#define RST_BUS_CE 4
#define RST_BUS_VE 5
#define RST_BUS_EMCE 6
#define RST_BUS_VP9 7
#define RST_BUS_DMA 8
#define RST_BUS_MSGBOX 9
#define RST_BUS_SPINLOCK 10
#define RST_BUS_HSTIMER 11
#define RST_BUS_DBG 12
#define RST_BUS_PSI 13
#define RST_BUS_PWM 14
#define RST_BUS_IOMMU 15
#define RST_BUS_DRAM 16
#define RST_BUS_NAND 17
#define RST_BUS_MMC0 18
#define RST_BUS_MMC1 19
#define RST_BUS_MMC2 20
#define RST_BUS_UART0 21
#define RST_BUS_UART1 22
#define RST_BUS_UART2 23
#define RST_BUS_UART3 24
#define RST_BUS_I2C0 25
#define RST_BUS_I2C1 26
#define RST_BUS_I2C2 27
#define RST_BUS_I2C3 28
#define RST_BUS_SCR0 29
#define RST_BUS_SCR1 30
#define RST_BUS_SPI0 31
#define RST_BUS_SPI1 32
#define RST_BUS_EMAC 33
#define RST_BUS_TS 34
#define RST_BUS_IR_TX 35
#define RST_BUS_THS 36
#define RST_BUS_I2S0 37
#define RST_BUS_I2S1 38
#define RST_BUS_I2S2 39
#define RST_BUS_I2S3 40
#define RST_BUS_SPDIF 41
#define RST_BUS_DMIC 42
#define RST_BUS_AUDIO_HUB 43
#define RST_USB_PHY0 44
#define RST_USB_PHY1 45
#define RST_USB_PHY3 46
#define RST_USB_HSIC 47
#define RST_BUS_OHCI0 48
#define RST_BUS_OHCI3 49
#define RST_BUS_EHCI0 50
#define RST_BUS_XHCI 51
#define RST_BUS_EHCI3 52
#define RST_BUS_OTG 53
#define RST_BUS_PCIE 54
#define RST_PCIE_POWERUP 55
#define RST_BUS_HDMI 56
#define RST_BUS_HDMI_SUB 57
#define RST_BUS_TCON_TOP 58
#define RST_BUS_TCON_LCD0 59
#define RST_BUS_TCON_TV0 60
#define RST_BUS_CSI 61
#define RST_BUS_HDCP 62
#endif /* _DT_BINDINGS_RESET_SUN50I_H6_H_ */
/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
/*
* Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
*/
#ifndef _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_
#define _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_
#define RST_R_APB1_TIMER 0
#define RST_R_APB1_TWD 1
#define RST_R_APB1_PWM 2
#define RST_R_APB2_UART 3
#define RST_R_APB2_I2C 4
#define RST_R_APB1_IR 5
#define RST_R_APB1_W1 6
#endif /* _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment