Commit 85c3d463 authored by Jagan Teki's avatar Jagan Teki Committed by Tom Rini

arm: sunxi: Enable DM_MMC on required SoCs

Enabling DM_MMC is forcing CONFIG_BLK=y so if any board which uses
SCSI must need to enable DM_SCSI otherwise SCSI reads on that particular
target making invalid reading to the disk drive.

Allwinner platform do support SCSI on A10, A20 and R40 SoC's out of
these only A10 have DM_SCSI enabled. So enabling DM_MMC on A20, R40
would eventually end-up with scsi disk read failures like [1]

So, enable DM_MMC in all places of respective SoC's instead of enabling
them globally to Allwinner platform.

Now, DM_MMC is enabled in Allwinner SoC's except A20 and R40.

[1] https://lists.denx.de/pipermail/u-boot/2019-April/364057.htmlReported-by: default avatarPablo Sebastián Greco <pgreco@centosproject.org>
Signed-off-by: Jagan Teki's avatarJagan Teki <jagan@amarulasolutions.com>
parent c48b07a9
......@@ -857,7 +857,6 @@ config ARCH_SUNXI
select DM_ETH
select DM_GPIO
select DM_KEYBOARD
select DM_MMC if MMC
select DM_SERIAL
select DM_USB if DISTRO_DEFAULTS
select OF_BOARD_SETUP
......
......@@ -154,6 +154,7 @@ config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7A
select ARM_CORTEX_CPU_IS_UP
select DM_MMC if MMC
select DM_SCSI if SCSI
select PHY_SUN4I_USB
select DRAM_SUN4I
......@@ -164,6 +165,7 @@ config MACH_SUN5I
bool "sun5i (Allwinner A13)"
select CPU_V7A
select ARM_CORTEX_CPU_IS_UP
select DM_MMC if MMC
select DRAM_SUN4I
select PHY_SUN4I_USB
select SUNXI_GEN_SUN4I
......@@ -176,6 +178,7 @@ config MACH_SUN6I
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DM_MMC if MMC
select DRAM_SUN6I
select PHY_SUN4I_USB
select SUN6I_P2WI
......@@ -202,6 +205,7 @@ config MACH_SUN8I_A23
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DM_MMC if MMC
select DRAM_SUN8I_A23
select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
......@@ -215,6 +219,7 @@ config MACH_SUN8I_A33
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DM_MMC if MMC
select DRAM_SUN8I_A33
select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
......@@ -225,6 +230,7 @@ config MACH_SUN8I_A33
config MACH_SUN8I_A83T
bool "sun8i (Allwinner A83T)"
select CPU_V7A
select DM_MMC if MMC
select DRAM_SUN8I_A83T
select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
......@@ -240,6 +246,7 @@ config MACH_SUN8I_H3
select ARCH_SUPPORT_PSCI
select MACH_SUNXI_H3_H5
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
select DM_MMC if MMC
config MACH_SUN8I_R40
bool "sun8i (Allwinner R40)"
......@@ -258,6 +265,7 @@ config MACH_SUN8I_V3S
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DM_MMC if MMC
select SUNXI_GEN_SUN6I
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_16BIT
......@@ -272,11 +280,13 @@ config MACH_SUN9I
select SUNXI_GEN_SUN6I
select SUN8I_RSB
select SUPPORT_SPL
select DM_MMC if MMC
config MACH_SUN50I
bool "sun50i (Allwinner A64)"
select ARM64
select DM_I2C
select DM_MMC if MMC
select PHY_SUN4I_USB
select SUN6I_PRCM
select SUNXI_DE2
......@@ -293,6 +303,7 @@ config MACH_SUN50I_H5
bool "sun50i (Allwinner H5)"
select ARM64
select MACH_SUNXI_H3_H5
select DM_MMC if MMC
select FIT
select SPL_LOAD_FIT
......@@ -300,6 +311,7 @@ config MACH_SUN50I_H6
bool "sun50i (Allwinner H6)"
select ARM64
select SUPPORT_SPL
select DM_MMC if MMC
select FIT
select SPL_LOAD_FIT
select DRAM_SUN50I_H6
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment