Commit 9ad93c0c authored by Jagan Teki's avatar Jagan Teki

ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3

Update all A23/A33/r16 devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commits.

A23:
commit bc3bd041fe766219a44688b182c260064007f0cc
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date:   Tue Apr 24 17:55:02 2018 +0200

    ARM: dts: sun8i: a23/a33: declare NAND pins

A33:
commit 88fe315d2c0a397ef42d7639addab0e021ae911d
Author: Maxime Ripard <maxime.ripard@bootlin.com>
Date:   Wed Apr 4 11:57:15 2018 +0200

    ARM: dts: sun8i: a33: Add the DSI-related nodes

r16:
commit 9621d0bd1b0d61167e1853ac68cf4869c31bcc96
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date:   Tue Apr 24 17:55:03 2018 +0200

    ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support

Note:
- Drop pinctrl from sun8i-r16-nintendo-nes-classic-edition.dts since
  sun8i-a23-a33.dtsi is added with Linux sync.
- Don't sync non U-Boot supported dts files
   sun8i-a23-ippo-q8h-v1.2.dts
   sun8i-a23-ippo-q8h-v5.dts
   sun8i-a33-et-q8-v1.6.dts
   sun8i-a33-ippo-q8h-v1.2.dts
   sun8i-r16-nintendo-nes-classic.dts
   sun8i-r16-nintendo-super-nes-classic.dts
Signed-off-by: Jagan Teki's avatarJagan Teki <jagan@amarulasolutions.com>
parent b9d59d08
......@@ -118,13 +118,13 @@
};
};
soc@01c00000 {
soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
dma: dma-controller@01c02000 {
dma: dma-controller@1c02000 {
compatible = "allwinner,sun8i-a23-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
......@@ -133,7 +133,7 @@
#dma-cells = <1>;
};
mmc0: mmc@01c0f000 {
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>,
......@@ -152,7 +152,7 @@
#size-cells = <0>;
};
mmc1: mmc@01c10000 {
mmc1: mmc@1c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>,
......@@ -171,7 +171,7 @@
#size-cells = <0>;
};
mmc2: mmc@01c11000 {
mmc2: mmc@1c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>,
......@@ -190,7 +190,7 @@
#size-cells = <0>;
};
nfc: nand@01c03000 {
nfc: nand@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
......@@ -198,12 +198,14 @@
clock-names = "ahb", "mod";
resets = <&ccu RST_BUS_NAND>;
reset-names = "ahb";
pinctrl-names = "default";
pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usb_otg: usb@01c19000 {
usb_otg: usb@1c19000 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
......@@ -216,7 +218,7 @@
status = "disabled";
};
usbphy: phy@01c19400 {
usbphy: phy@1c19400 {
/*
* compatible and address regions get set in
* SoC specific dtsi file
......@@ -233,7 +235,7 @@
#phy-cells = <1>;
};
ehci0: usb@01c1a000 {
ehci0: usb@1c1a000 {
compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
......@@ -244,7 +246,7 @@
status = "disabled";
};
ohci0: usb@01c1a400 {
ohci0: usb@1c1a400 {
compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
......@@ -255,7 +257,7 @@
status = "disabled";
};
ccu: clock@01c20000 {
ccu: clock@1c20000 {
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
......@@ -263,7 +265,7 @@
#reset-cells = <1>;
};
pio: pinctrl@01c20800 {
pio: pinctrl@1c20800 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c20800 0x400>;
/* interrupts get set in SoC specific dtsi file */
......@@ -289,23 +291,6 @@
function = "uart1";
};
nand_pins_a: nand-base0@0 {
pins = "PC0", "PC1", "PC2", "PC5",
"PC8", "PC9", "PC10", "PC11",
"PC12", "PC13", "PC14", "PC15";
function = "nand0";
};
nand_cs0_pins_a: nand-cs@0 {
pins = "PC4";
function = "nand0";
};
nand_rb0_pins_a: nand-rb@0 {
pins = "PC6";
function = "nand0";
};
mmc0_pins_a: mmc0@0 {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
......@@ -332,6 +317,37 @@
bias-pull-up;
};
nand_pins: nand-pins {
pins = "PC0", "PC1", "PC2", "PC5",
"PC8", "PC9", "PC10", "PC11",
"PC12", "PC13", "PC14", "PC15";
function = "nand0";
};
nand_pins_cs0: nand-pins-cs0 {
pins = "PC4";
function = "nand0";
bias-pull-up;
};
nand_pins_cs1: nand-pins-cs1 {
pins = "PC3";
function = "nand0";
bias-pull-up;
};
nand_pins_rb0: nand-pins-rb0 {
pins = "PC6";
function = "nand0";
bias-pull-up;
};
nand_pins_rb1: nand-pins-rb1 {
pins = "PC7";
function = "nand0";
bias-pull-up;
};
pwm0_pins: pwm0 {
pins = "PH0";
function = "pwm0";
......@@ -361,7 +377,7 @@
};
};
timer@01c20c00 {
timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
......@@ -369,13 +385,13 @@
clocks = <&osc24M>;
};
wdt0: watchdog@01c20ca0 {
wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
pwm: pwm@01c21400 {
pwm: pwm@1c21400 {
compatible = "allwinner,sun7i-a20-pwm";
reg = <0x01c21400 0xc>;
clocks = <&osc24M>;
......@@ -383,14 +399,14 @@
status = "disabled";
};
lradc: lradc@01c22800 {
lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart0: serial@01c28000 {
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
......@@ -403,7 +419,7 @@
status = "disabled";
};
uart1: serial@01c28400 {
uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
......@@ -416,7 +432,7 @@
status = "disabled";
};
uart2: serial@01c28800 {
uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
......@@ -429,7 +445,7 @@
status = "disabled";
};
uart3: serial@01c28c00 {
uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
......@@ -442,7 +458,7 @@
status = "disabled";
};
uart4: serial@01c29000 {
uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
......@@ -455,7 +471,7 @@
status = "disabled";
};
i2c0: i2c@01c2ac00 {
i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
......@@ -466,7 +482,7 @@
#size-cells = <0>;
};
i2c1: i2c@01c2b000 {
i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
......@@ -477,7 +493,7 @@
#size-cells = <0>;
};
i2c2: i2c@01c2b400 {
i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
......@@ -515,7 +531,7 @@
assigned-clock-rates = <384000000>;
};
gic: interrupt-controller@01c81000 {
gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
......@@ -526,7 +542,7 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
rtc: rtc@01f00000 {
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
......@@ -544,7 +560,7 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
prcm@01f01400 {
prcm@1f01400 {
compatible = "allwinner,sun8i-a23-prcm";
reg = <0x01f01400 0x200>;
......@@ -592,12 +608,12 @@
};
};
cpucfg@01f01c00 {
cpucfg@1f01c00 {
compatible = "allwinner,sun8i-a23-cpuconfig";
reg = <0x01f01c00 0x300>;
};
r_uart: serial@01f02800 {
r_uart: serial@1f02800 {
compatible = "snps,dw-apb-uart";
reg = <0x01f02800 0x400>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
......@@ -608,7 +624,7 @@
status = "disabled";
};
r_pio: pinctrl@01f02c00 {
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a23-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
......@@ -635,7 +651,7 @@
};
};
r_rsb: rsb@01f03400 {
r_rsb: rsb@1f03400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x01f03400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
......
......@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Allwinner A23 Evaluation Board";
......@@ -108,17 +107,15 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
cd-inverted;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
status = "okay";
};
&pio {
mmc0_cd_pin_evb: mmc0_cd_pin@0 {
allwinner,pins = "PB4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
pins = "PB4";
function = "gpio_in";
bias-pull-up;
};
};
......
......@@ -53,9 +53,10 @@
status = "okay";
};
&gsl1680 {
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl3675";
touchscreen-fw-name = "silead/gsl3675-gt90h.fw";
firmware-name = "gsl3675-gt90h.fw";
touchscreen-size-x = <1792>;
touchscreen-size-y = <1024>;
status = "okay";
......
......@@ -53,10 +53,12 @@
status = "okay";
};
&gsl1680 {
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl1680";
firmware-name = "gsl1680-inet86dz.fw";
touchscreen-size-x = <960>;
touchscreen-size-y = <640>;
touchscreen-fw-name = "silead/gsl1680-inet86dz.fw";
status = "okay";
};
......
......@@ -62,14 +62,11 @@
};
};
&gsl1680 {
vddio-supply = <&reg_ldo_io1>;
touchscreen-size-x = <960>;
touchscreen-size-y = <640>;
touchscreen-inverted-x;
touchscreen-inverted-y;
touchscreen-fw-name = "silead/gsl1680-polaroid-mid2407pxe03.fw";
status = "okay";
&i2c1 {
mma7660: accelerometer@4c {
reg = <0x4c>;
compatible = "fsl,mma7660";
};
};
&mmc1 {
......@@ -89,21 +86,24 @@
};
&mmc1_pins_a {
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
bias-pull-up;
};
&r_pio {
wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
allwinner,pins = "PL6";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
pins = "PL6";
function = "gpio_out";
};
};
&reg_ldo_io1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-touchscreen";
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl1680";
firmware-name = "gsl1680-polaroid-mid2407pxe03.fw";
touchscreen-size-x = <960>;
touchscreen-size-y = <640>;
touchscreen-inverted-x;
touchscreen-inverted-y;
vddio-supply = <&reg_ldo_io1>;
status = "okay";
};
......@@ -62,14 +62,6 @@
};
};
&gsl1680 {
compatible = "silead,gsl3670";
touchscreen-fw-name = "silead/gsl3670-polaroid-mid2809pxe04.fw";
touchscreen-size-x = <1660>;
touchscreen-size-y = <890>;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
......@@ -87,14 +79,21 @@
};
&mmc1_pins_a {
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
bias-pull-up;
};
&r_pio {
wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
allwinner,pins = "PL6";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
pins = "PL6";
function = "gpio_out";
};
};
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl3670";
firmware-name = "gsl3670-polaroid-mid2809pxe04.fw";
touchscreen-size-x = <1660>;
touchscreen-size-y = <890>;
status = "okay";
};
......@@ -48,3 +48,16 @@
model = "Q8 A23 Tablet";
compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
};
&codec {
allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
allwinner,audio-routing =
"Headphone", "HP",
"Headphone", "HPCOM",
"Speaker", "HP",
"MIC1", "Mic",
"MIC2", "Headset Mic",
"Mic", "MBIAS",
"Headset Mic", "HBIAS";
status = "okay";
};
......@@ -49,8 +49,8 @@
reg = <0x40000000 0x40000000>;
};
soc@01c00000 {
codec: codec@01c22c00 {
soc@1c00000 {
codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-a23-codec";
reg = <0x01c22c00 0x400>;
......
......@@ -58,9 +58,10 @@
status = "okay";
};
&gsl1680 {
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl3675";
touchscreen-fw-name = "silead/gsl3675-ga10h.fw";
firmware-name = "gsl3675-ga10h.fw";
touchscreen-size-x = <1630>;
touchscreen-size-y = <990>;
touchscreen-inverted-y;
......
......@@ -49,6 +49,15 @@
model = "INet-D978 Rev 02";
compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
aliases {
serial0 = &uart1;
};
chosen {
/* Delete debug UART as serial0 is the UART for bluetooth */
/delete-property/stdout-path;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
......@@ -62,7 +71,7 @@
};
&mmc1_pins_a {
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
bias-pull-up;
};
&mmc1 {
......@@ -80,9 +89,19 @@
&r_pio {
led_pin_d978: led_pin_d978@0 {
allwinner,pins = "PL5";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
pins = "PL5";
function = "gpio_out";
drive-strength = <20>;
};
};
&r_uart {
status = "disabled";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>,
<&uart1_pins_cts_rts_a>;
status = "okay";
};
......@@ -43,7 +43,6 @@
/dts-v1/;
#include "sun8i-a33.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
......@@ -62,8 +61,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pin_olinuxino>;
green {
label = "a33-olinuxino:green:usr";
......@@ -72,17 +69,24 @@
};
};
&codec {
status = "okay";
};
&dai {
status = "okay";
};
&ehci0 {
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
cd-inverted;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
status = "okay";
};
......@@ -90,29 +94,6 @@
status = "okay";
};
&pio {
led_pin_olinuxino: led_pins@0 {
allwinner,pins = "PB7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
allwinner,pins = "PB4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PB3";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&r_rsb {
status = "okay";
......@@ -126,7 +107,15 @@
};
};
#include "axp22x.dtsi"
#include "axp223.dtsi"
&ac_power_supply {
status = "okay";
};
&battery_power_supply {
status = "okay";
};
&reg_aldo1 {
regulator-always-on;
......@@ -201,6 +190,21 @@
vcc-lcd-supply = <&reg_dc1sw>;
};
&sound {
/* Board level jack widgets */
simple-audio-card,widgets = "Microphone", "Microphone Jack",
"Headphone", "Headphone Jack";
/* Board level routing. First 2 routes copied from SoC level */
simple-audio-card,routing =
"Left DAC", "AIF1 Slot 0 Left",
"Right DAC", "AIF1 Slot 0 Right",
"HP", "HPCOM",
"Headphone Jack", "HP",
"MIC1", "Microphone Jack",
"Microphone Jack", "MBIAS";
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
......@@ -217,8 +221,6 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
......
......@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Sinlinx SinA33";
......@@ -80,7 +79,7 @@
};
};
&de {
&codec {
status = "okay";
};
......@@ -88,6 +87,28 @@
cpu-supply = <&reg_dcdc3>;
};
&cpu0_opp_table {
opp-1104000000 {
opp-hz = /bits/ 64 <1104000000>;
opp-microvolt = <1320000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1320000>;
clock-latency-ns = <244144>; /* 8 32k periods */
};
};
&de {
status = "okay";
};
&dai {
status = "okay";
};
&ehci0 {
status = "okay";
};
......@@ -123,8 +144,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;