Commit a6580dfd authored by Hauke Mehrtens's avatar Hauke Mehrtens Committed by Jagan Teki

sun8i: h2: Add initial Orange Pi R1 support

Orange Pi R1 is an open-source single-board computer using the
Allwinner H2+ SOC.

H2+ Orange Pi R1 has
 - Quad-core Cortex-A7
 - 256MB DDR3
 - micrSD slot
 - 128MBit SPI Nor flash
 - Debug TTL UART
 - 100MBit/s Ethernet (H2+)
 - 100MBit/s Ethernet (RTL8152B)
 - Wifi (RTL8189ETV)
 - USB 2.0 OTG + power supply
This board is very similar to the Orange Pi Zero.

The device tree file is copied from the Linux kernel 4.17.
Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
Acked-by: Maxime Ripard's avatarMaxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: default avatarJagan Teki <jagan@openedev.com>
parent f58e7795
......@@ -358,6 +358,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
sun8i-a83t-tbs-a711.dts
dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h2-plus-libretech-all-h3-cc.dtb \
sun8i-h2-plus-orangepi-r1.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-libretech-all-h3-cc.dtb \
......
/*
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/* Orange Pi R1 is based on Orange Pi Zero design */
#include "sun8i-h2-plus-orangepi-zero.dts"
/ {
model = "Xunlong Orange Pi R1";
compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
/delete-node/ reg_vcc_wifi;
/*
* Ths pin of this regulator is the same with the Wi-Fi extra
* regulator on the original Zero. However it's used for USB
* Ethernet rather than the Wi-Fi now.
*/
reg_vcc_usb_eth: reg-vcc-usb-ethernet {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-usb-ethernet";
enable-active-high;
gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
aliases {
ethernet1 = &rtl8189etv;
};
};
/*
&spi0 {
status = "okay";
flash@0 {
compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
};
};
*/
&ohci1 {
/*
* RTL8152B USB-Ethernet adapter is connected to USB1,
* and it's a USB 2.0 device. So the OHCI1 controller
* can be left disabled.
*/
status = "disabled";
};
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
rtl8189etv: sdio_wifi@1 {
reg = <1>;
};
};
&usbphy {
usb1_vbus-supply = <&reg_vcc_usb_eth>;
};
......@@ -355,6 +355,11 @@ M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/orangepi_prime_defconfig
ORANGEPI R1 BOARD
M: Hauke Mehrtens <hauke@hauke-m.de>
S: Maintained
F: configs/orangepi_r1_defconfig
PINE64 BOARDS
M: Andre Przywara <andre.przywara@arm.com>
S: Maintained
......
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=624
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
# CONFIG_VIDEO_DE2 is not set
CONFIG_SPL_SPI_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
# CONFIG_CMD_FLASH is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment