Commit a8b36f22 authored by Lothar Felten's avatar Lothar Felten Committed by Jagan Teki

configs: Bananapi_M2_Ultra: enable gigabit ethernet

Enable the gigabit ethernet for the Bananapi M2 Ultra board.
Tested on BananaPi M2 Berry (R40), custom board (V40)
Reviewed-by: Joe Hershberger's avatarJoe Hershberger <joe.hershberger@ni.com>
Signed-off-by: default avatarLothar Felten <lothar.felten@gmail.com>
Acked-by: Maxime Ripard's avatarMaxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: default avatarJagan Teki <jagan@openedev.com>
Tested-by: default avatarJagan Teki <jagan@openedev.com>
parent 3c2abf50
......@@ -48,6 +48,7 @@
compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
aliases {
ethernet0 = &gmac;
serial0 = &uart0;
};
......@@ -67,3 +68,18 @@
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
......@@ -14,6 +14,10 @@ CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
CONFIG_SCSI_AHCI=y
CONFIG_AXP_DLDO4_VOLT=2500
CONFIG_AXP_ALDO2_VOLT=2500
CONFIG_AXP_ELDO3_VOLT=1200
CONFIG_SCSI=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
CONFIG_SUN8I_EMAC=y
CONFIG_RGMII=y
CONFIG_MACPWR="PA17"
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment