Commit d11455f5 authored by Jagan Teki's avatar Jagan Teki Committed by Philipp Tomsich

ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux

Sync rk3288-vyasa board dts from Linux for proper updates and maintenance
- rk3288-vyasa.dts: Similar to Linux dts
- rk3288-vyasa-u-boot.dtsi: u-boot dts changes

Also updated MAINTAINERS for these dts files.
Signed-off-by: Jagan Teki's avatarJagan Teki <jagan@amarulasolutions.com>
Acked-by: Philipp Tomsich's avatarPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich's avatarPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
parent 0c8e0b31
/*
* Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
&dmc {
rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
0x5 0x0>;
rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
0xa60 0x40 0x10 0x0>;
/* Add a dummy value to cause of-platdata think this is bytes */
rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
};
&sdmmc {
u-boot,dm-pre-reloc;
};
&uart2 {
u-boot,dm-pre-reloc;
};
&pinctrl {
u-boot,dm-pre-reloc;
};
......@@ -52,8 +52,8 @@
};
memory {
reg = <0x0 0x0 0x0 0x80000000>;
device_type = "memory";
reg = <0 0x80000000>;
};
vcc_sd: sdmmc-regulator {
......@@ -78,22 +78,20 @@
};
};
&dmc {
rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
0x5 0x0>;
rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
0xa60 0x40 0x10 0x0>;
/* Add a dummy value to cause of-platdata think this is bytes */
rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
};
&cpu0 {
cpu0-supply = <&vdd_cpu>;
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
......@@ -103,12 +101,12 @@
reg = <0x1b>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
wakeup-source;
rockchip,system-power-controller;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
wakeup-source;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
......@@ -124,22 +122,22 @@
regulators {
vdd_cpu: vdd_log: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vdd_log";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
......@@ -147,20 +145,20 @@
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_io: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
......@@ -168,11 +166,11 @@
};
vcca_tp: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_tp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_tp";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
......@@ -180,22 +178,22 @@
};
vcc_codec: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_codec";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_codec";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_10: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vdd_10";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
......@@ -203,11 +201,11 @@
};
vcc_gps: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_gps";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_gps";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
......@@ -215,11 +213,11 @@
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
......@@ -227,11 +225,11 @@
};
vcc10_lcd: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc10_lcd";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vcc10_lcd";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
......@@ -239,11 +237,11 @@
};
vcc_18: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_18";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
......@@ -251,11 +249,11 @@
};
vcc18_lcd: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc18_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
......@@ -263,22 +261,22 @@
};
vcc33_sd: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc33_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc33_sd";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_lan: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_lan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_lan";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
......@@ -287,10 +285,11 @@
};
};
&sdmmc {
u-boot,dm-pre-reloc;
&i2c2 {
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
......@@ -300,10 +299,26 @@
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&uart2 {
u-boot,dm-pre-reloc;
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
......@@ -312,7 +327,6 @@
};
&pinctrl {
u-boot,dm-pre-reloc;
pmic {
pmic_int: pmic-int {
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
......
......@@ -4,3 +4,5 @@ S: Maintained
F: board/amarula/vyasa-rk3288
F: include/configs/vyasa-rk3288.h
F: configs/vyasa-rk3288_defconfig
F: arch/arm/dts/rk3288-vyasa.dts
F: arch/arm/dts/rk3288-vyasa-u-boot.dtsi
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment