Commit dc146ca1 authored by Jagan Teki's avatar Jagan Teki Committed by Tom Rini

Kconfig: Migrate CONFIG_BUILD_TARGET

Migrate CONFIG_BUILD_TARGET into Kconfig.
Signed-off-by: Jagan Teki's avatarJagan Teki <jagan@amarulasolutions.com>
parent dc57be51
......@@ -224,6 +224,19 @@ config BUILD_ROM
which are not shipped in the U-Boot source tree.
Please, see doc/README.x86 for details.
config BUILD_TARGET
string "Build target special images"
default "u-boot-with-spl.sfp" if ARCH_SOCFPGA
default "u-boot-spl.kwb" if ARCH_MVEBU && SPL_BUILD
default "u-boot-elf.srec" if RCAR_GEN3
default "u-boot.itb" if SPL_LOAD_FIT && ARCH_SUNXI
help
Some SoCs need special image types (e.g. U-Boot binary
with a special header) as build targets. By defining
CONFIG_BUILD_TARGET in the SoC / board header, this
special image will be automatically built upon calling
make / buildman.
endmenu # General setup
menu "Boot images"
......
......@@ -1986,13 +1986,6 @@ The following options need to be configured:
200 ms.
- Configuration Management:
CONFIG_BUILD_TARGET
Some SoCs need special image types (e.g. U-Boot binary
with a special header) as build targets. By defining
CONFIG_BUILD_TARGET in the SoC / board header, this
special image will be automatically built upon calling
make / buildman.
CONFIG_IDENT_STRING
......
......@@ -40,11 +40,6 @@
#define CONFIG_SYS_KWD_CONFIG arch/arm/mach-mvebu/kwbimage.cfg
#endif /* CONFIG_SYS_KWD_CONFIG */
/* Add target to build it automatically upon "make" */
#ifdef CONFIG_SPL
#define CONFIG_BUILD_TARGET "u-boot-spl.kwb"
#endif
/* end of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000
......
......@@ -5,6 +5,7 @@ CONFIG_TARGET_SBx81LIFKW=y
CONFIG_IDENT_STRING="\nSBx81LIFKW"
# CONFIG_SYS_MALLOC_F is not set
CONFIG_BOOTDELAY=3
CONFIG_BUILD_TARGET="u-boot.kwb"
CONFIG_SILENT_CONSOLE=y
CONFIG_SILENT_U_BOOT_ONLY=y
CONFIG_MISC_INIT_R=y
......
......@@ -5,6 +5,7 @@ CONFIG_TARGET_SBx81LIFXCAT=y
CONFIG_IDENT_STRING="\nSBx81LIFXCAT"
# CONFIG_SYS_MALLOC_F is not set
CONFIG_BOOTDELAY=3
CONFIG_BUILD_TARGET="u-boot.kwb"
CONFIG_SILENT_CONSOLE=y
CONFIG_SILENT_U_BOOT_ONLY=y
CONFIG_MISC_INIT_R=y
......
......@@ -6,6 +6,7 @@ CONFIG_IDENT_STRING="\nMarvell-DreamPlug"
CONFIG_NR_DRAM_BANKS=2
# CONFIG_SYS_MALLOC_F is not set
CONFIG_BOOTDELAY=3
CONFIG_BUILD_TARGET="u-boot.kwb"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_FLASH is not set
......
......@@ -5,6 +5,7 @@ CONFIG_TARGET_DS109=y
CONFIG_NR_DRAM_BANKS=2
# CONFIG_SYS_MALLOC_F is not set
CONFIG_HUSH_PARSER=y
CONFIG_BUILD_TARGET="u-boot.kwb"
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_IDE=y
CONFIG_CMD_I2C=y
......
......@@ -6,6 +6,7 @@ CONFIG_IDENT_STRING="\nMarvell-GuruPlug"
CONFIG_NR_DRAM_BANKS=2
# CONFIG_SYS_MALLOC_F is not set
CONFIG_BOOTDELAY=3
CONFIG_BUILD_TARGET="u-boot.kwb"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
......
......@@ -5,6 +5,7 @@ CONFIG_TARGET_IB62X0=y
CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0"
CONFIG_NR_DRAM_BANKS=2
CONFIG_BOOTDELAY=3
CONFIG_BUILD_TARGET="u-boot.kwb"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ib62x0 => "
......
......@@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_TARGET_NSA310S=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_BOOTDELAY=3
CONFIG_BUILD_TARGET="u-boot.kwb"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="nsa310s => "
......
......@@ -7,6 +7,7 @@ CONFIG_IDENT_STRING="\nMarvell-Sheevaplug"
CONFIG_NR_DRAM_BANKS=2
# CONFIG_SYS_MALLOC_F is not set
CONFIG_BOOTDELAY=3
CONFIG_BUILD_TARGET="u-boot.kwb"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
......
......@@ -13,7 +13,6 @@
#define CONFIG_KW88F6281 1 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
#define CONFIG_BUILD_TARGET "u-boot.kwb"
/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
......
......@@ -13,7 +13,6 @@
#define CONFIG_KW88F6281 1 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
#define CONFIG_BUILD_TARGET "u-boot.kwb"
/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
......
......@@ -15,9 +15,6 @@
#define CONFIG_KW88F6281 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/* Add target to build it automatically upon "make" */
#define CONFIG_BUILD_TARGET "u-boot.kwb"
/*
* Compression configuration
*/
......
......@@ -13,9 +13,6 @@
#define CONFIG_KW88F6281 1 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/* Add target to build it automatically upon "make" */
#define CONFIG_BUILD_TARGET "u-boot.kwb"
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
......
......@@ -15,9 +15,6 @@
#define CONFIG_KW88F6702 1 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/* add target to build it automatically upon "make" */
#define CONFIG_BUILD_TARGET "u-boot.kwb"
/* compression configuration */
#define CONFIG_BZIP2
......
......@@ -12,7 +12,6 @@
#include <asm/arch/rmobile.h>
#define CONFIG_REMAKE_ELF
#define CONFIG_BUILD_TARGET "u-boot-elf.srec"
/* boot option */
......
......@@ -14,9 +14,6 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/* add target to build it automatically upon "make" */
#define CONFIG_BUILD_TARGET "u-boot-with-spl.sfp"
/*
* Memory configurations
*/
......
......@@ -32,7 +32,6 @@
#endif
#ifdef CONFIG_ARM64
#define CONFIG_BUILD_TARGET "u-boot.itb"
#define CONFIG_SYS_BOOTM_LEN (32 << 20)
#endif
......
......@@ -178,7 +178,6 @@ CONFIG_BS_SIZE
CONFIG_BTB
CONFIG_BUFNO_AUTO_INCR_BIT
CONFIG_BUILD_ENVCRC
CONFIG_BUILD_TARGET
CONFIG_BUS_WIDTH
CONFIG_BZIP2
CONFIG_CADDY2
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment